Power Check Doc Excel
Thread Starter
Joined: Feb 2002
Posts: 1,119
Likes: 0
From: N20,W99
Power Check Doc Excel
I haven't used this Excel doc but it's supposed to help you with the power check in several helicopters. It would be nice if a couple of people could download it and make a small review,
DOWNLOAD HERE
Courtesy of trackdirect and standard aero
DOWNLOAD HERE
Courtesy of trackdirect and standard aero
Last edited by BlenderPilot; 20th September 2005 at 16:47.
Joined: Jun 2003
Posts: 82
Likes: 1
From: Australia
Just a few tips with the spreadsheet.
If the figures entered are "off the chart" the figures are not in a range that can be calculated. If the figures don't make it on the graph in the RFM it will not work in the program.
The best readings are obtained when you follow the same procedure as set out in the RFM.
Best results I have found are carried out at 5000ft, 0Kt, 100% tq, 1013 hp (29.92 in).
It sure beats plotting figures on a graph, Have fun!!
Trackdirect
If the figures entered are "off the chart" the figures are not in a range that can be calculated. If the figures don't make it on the graph in the RFM it will not work in the program.
The best readings are obtained when you follow the same procedure as set out in the RFM.
Best results I have found are carried out at 5000ft, 0Kt, 100% tq, 1013 hp (29.92 in).
It sure beats plotting figures on a graph, Have fun!!
Trackdirect
