Go Back  PPRuNe Forums > Aircrew Forums > Rotorheads
Reload this Page >

Robinson R44

Wikiposts
Search
Rotorheads A haven for helicopter professionals to discuss the things that affect them

Robinson R44

Thread Tools
 
Search this Thread
 
Old 26th Feb 2006, 00:46
  #761 (permalink)  
 
Join Date: Jan 2005
Location: Australia
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
R 44 Endorsement

I have a friend who has just got his R44 Endorsement after approx 300 hours on R 22 's. Is there a minimum of hours required that he must do solo in the R44 before he can carry a passenger/passengers? Or can he take them straight away. I am in Australia.
CHOPPER74 is offline  
Old 26th Feb 2006, 02:47
  #762 (permalink)  
 
Join Date: Dec 2002
Location: Sydney
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
plus, check the insurance on the R44 - it may have a requirement for hours on type
R405 is offline  
Old 6th Apr 2006, 07:05
  #763 (permalink)  
 
Join Date: Jul 2005
Location: Australia
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
R44 & fuel injection option

hi.

Some advice please:

What are the advantages and disadvantages of the fuel injection option for the R44? Is there a significant power advantage? Fuel burn?
Usage will be general charter - mainly tourist ops - 6 months in outback Qld/Nt, and 6 months coastal (if that makes any difference).

Many thanks.
ecoathlete is offline  
Old 6th Apr 2006, 07:30
  #764 (permalink)  
 
Join Date: Jan 2001
Location: North Queensland, Australia
Posts: 2,980
Received 14 Likes on 7 Posts
Not sure about fuel burn, but you don't have to worry about carby icing with injection.
Arm out the window is offline  
Old 6th Apr 2006, 08:27
  #765 (permalink)  
WLM
 
Join Date: Mar 2002
Location: 3 Degrees North
Posts: 370
Likes: 0
Received 0 Likes on 0 Posts
I ve been flying our Raven 1 for the last 3 years from sea level operations to confined pads at 5000', never had any problem, always kept the carb temp around 10 degrees or so. The injected model cost quite a bit more initially than a good Raven 1 and if you're starting up a tourist ops, every penny counts.
I might even consider selling my Raven 1 as we now have an EC120 as well. PM me if you're interested.
WLM
WLM is offline  
Old 6th Apr 2006, 12:20
  #766 (permalink)  
 
Join Date: Mar 2002
Location: Midlands
Age: 71
Posts: 605
Likes: 0
Received 0 Likes on 0 Posts
Raven 2

Despite a slightly heavier weight, you get a net gain of around 70lb in payload with the Raven 2.

Here are Raven 2 numbers.

Empty weight - 1535lbs
MAUW - 2500lbs
50 USG @ 6lb per gallon ( 14 USG per hour)

Basically, it is an excellent 3 seater with full fuel. The extra 70lb is worth having. When you consider the accident stats, fuel injection v carb is a safer option.

Hairy
Hairyplane is offline  
Old 6th Apr 2006, 13:25
  #767 (permalink)  
 
Join Date: Oct 2003
Location: Canada
Posts: 1,852
Likes: 0
Received 0 Likes on 0 Posts
For what it's worth, I owned a Hughes 269B and trained on a 300C, both with
fuel injection. "Set it and forget it" - the Bendix unit was flawless: one less thing to worry about.
rotornut is offline  
Old 6th Apr 2006, 13:42
  #768 (permalink)  
WLM
 
Join Date: Mar 2002
Location: 3 Degrees North
Posts: 370
Likes: 0
Received 0 Likes on 0 Posts
Hairyplane

The Raven 1 is also very good with 3 pax only and full fuel, burning only 52 litres per hour, so more economical than the Raven 2 for less initial investment. 34 kgs or 70 lbs extra does not really justify the difference in price in my view but if you
WLM is offline  
Old 6th Apr 2006, 16:39
  #769 (permalink)  
 
Join Date: Feb 2006
Location: Malaysia
Posts: 104
Likes: 0
Received 0 Likes on 0 Posts
From flying both the Raven I and Raven II for the last few years from sea level in Ireland I have learned that the Raven II is alot easier to start on those cold winter mornings. Plenty of priming required in the Raven I and only the regular amount in the Raven II.
Vertical T/O is offline  
Old 6th Apr 2006, 22:14
  #770 (permalink)  
 
Join Date: Nov 2001
Location: Alderney or Lancashire UK
Posts: 570
Likes: 0
Received 0 Likes on 0 Posts
Arm out of window has it right. Lack of carb ice and carb heat knob is #1. This makes it worth having.

The only other advantage offered by injection is better fuel distribution which makes for a smoother, more efficient engine. Hardly noticable on a 540.

Contrary to popular opinion injection does not make the engine more powerful. Other things do that.

Fuel burn is adjustable and depends how it is set up. If you get an aircraft which is excessively thirsty, tell the engineer to sort it out - NOW. Its wasteful, clogs your valves, fouls your plugs and oil and is common.

The Raven 2 has other features which make it better than a Raven 1 but these are not down to fuel injection.

Disadvantages. Cost. Hot starting can be tricky till you learn how to do it.
Gaseous is offline  
Old 7th Apr 2006, 08:52
  #771 (permalink)  

The Original Whirly
 
Join Date: Feb 1999
Location: Belper, Derbyshire, UK
Posts: 4,326
Likes: 0
Received 0 Likes on 0 Posts
There's an article on the Raven II in the latest Today's Pilot (I wonder who wrote it....dum-de-dum). To quote from it...

"There are a few external differences between the Raven II and its predecessors, which Al now pointed out to me. The main and tail rotor blades have both been modified in the Raven II, and they have rounded aerodynamic tip caps to reduce noise levels. The rotor blades also have a wider chord, which means the new version is around five knots faster than the Raven I. There are two oil coolers, as the more powerful engine gets hotter and needs more cooling. The Raven II also has a higher gross weight, an increased payload, and the 28-volt electrical system means that starting is noticeably easier and more energetic than in the Raven I. And the simplest change could well be the one most appreciated by owners – the ignition key also opens all the door locks, eliminating the need for two separate keys."

There's probably more, but I can't easily separate it out from the whole article!
Whirlybird is offline  
Old 7th Apr 2006, 09:01
  #772 (permalink)  
 
Join Date: Mar 2002
Location: Midlands
Age: 71
Posts: 605
Likes: 0
Received 0 Likes on 0 Posts
Raven 2

Remember also that you will want to pass the thing on at some stage.

The success of the 44 will mean that there will be a wide choice on the secondhand market.

Imagine trying to flog a car these days without aircon or over the next few years without SatNav! Bite the bullet, pay the money and go for the Raven 2

You know it makes sense!

Hairyplane.
Hairyplane is offline  
Old 7th Apr 2006, 11:00
  #773 (permalink)  

Better red than ...
 
Join Date: Aug 2004
Location: Appleby-in-Westmorland Cumbria England
Posts: 1,412
Likes: 0
Received 0 Likes on 0 Posts
Spoken like a true helicopter salesman.

Its possible that the blade changes will find their way into the aspirated engine fleet on TBO and 12 year rebuilds.

The real issue in initial purchase cost. There is a difference in the RI and RII cost.

h-r
helicopter-redeye is offline  
Old 12th Apr 2006, 13:39
  #774 (permalink)  
RBS
 
Join Date: Feb 2006
Location: planetOZ
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
R44 Operation Costs

I have a friend who is looking at training to ppl(H) level and buying a R44 for business purposes. He is a MD of a successful Australian business and would like to operate this aircraft as part of his business. Can someone refer me to an organisation/individual who would be appropriate to consult regarding this operation.

Any advice/referals welcomed.
RBS is offline  
Old 13th Apr 2006, 02:16
  #775 (permalink)  
 
Join Date: Jan 2006
Location: Canada
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Mr. Robinson is a straight shooter

I have had 2 Robinsons, both R-44 and in my veiw the opperating cost are very close to those published on the www.robinsonheli.com web site

Let the slagging begin!
Air-Five-oh is offline  
Old 13th Apr 2006, 03:38
  #776 (permalink)  
 
Join Date: Oct 2001
Location: Canada
Posts: 60
Likes: 0
Received 0 Likes on 0 Posts
R44 operating cost

I was doing the math recently.... you can use the pdf file about direct operating cost from the Robinson website as a guideline but you should adjust the numbers for fuel, mechanic cost with the cost from your area.
Also consider that the reserve for overhaul... you need to include cost for shipping of those items to where ever you intend to get that service.
Do you have a Robinson mechanic in your area? Include travel cost if not...
Insurance can vary quite a bit as well depending on the pilots experience.
It's a great helicopter for the money you are spending!
flyheli is offline  
Old 20th Apr 2006, 06:34
  #777 (permalink)  
 
Join Date: Mar 2006
Location: scotland
Posts: 212
Received 0 Likes on 0 Posts
R44 Astro Vs R44 Raven

On looking to purchase either a late hydraulic Astro or an early Raven, is there any difference between the models apart from the name. One dealer is advertising a Raven but it is infact registered as an Astro. He tells me there's no difference. Help would be appreciated, oh and if anyone has one and wants an R22 as a trade-in (cash in bank ready to do transaction) let me know! Thanks
bvgs is offline  
Old 20th Apr 2006, 07:59
  #778 (permalink)  
 
Join Date: Apr 2002
Location: UK
Posts: 593
Likes: 0
Received 0 Likes on 0 Posts
No difference, as far as I know, except paperwork and residual value. Check the hydraulic pipework where it passes behind the starboard fuel tank - some chafing can occur here which could lead to a catastrophe.
headsethair is offline  
Old 21st Apr 2006, 02:41
  #779 (permalink)  
 
Join Date: Mar 2006
Location: On the move...
Age: 58
Posts: 358
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Mr Selfish
Adjustable pedals on the Raven

Mr Stickler fo detail

Mr Spelling, was that "of detail" or "for detail"...?



What about powerplant diff b/n Raven and Astro? Or is that only Raven II?

CYHeli
CYHeli is offline  
Old 24th Apr 2006, 08:20
  #780 (permalink)  
 
Join Date: Oct 2005
Location: NON OF UR BUSNESS
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
R44 Clipper II with fixed floats

Have any PPRUNERS flown or are flying a R44 Clipper II with fixed floats. I am wondering what the cruise speed is. The Robinson web site states it takes 10 knots of the cruise speed off a raven II which is 117kts. is this a fair claim. I have only flown astros and ravens which cruise around 105kts. will a clipper II with fixed floats achive this cruise speed.
Heavy Lift R22 is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.