A320 Simulator
Thread Starter
Join Date: Aug 2001
Location: Above the Horizon
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
A320 Simulator
Can someone please tell me how an instructor can position an aircraft at a specified location in the air in the simulator from the Instructor Operating Station( console) other than the pre-programmed locations like 12 NMs final, FL100 , FL350 etc? For example if I want to position the aircraft on 320 Radial at 25NMs from OMDB, how do I accomplish that? Thanks.
Join Date: Mar 2000
Location: Sunrise Senior Living
Posts: 1,338
Likes: 0
Received 0 Likes
on
0 Posts
Put ac in the air, tap map where you want to be, hit "Reposition to Cursor"
Works on CAE built sims, not sure about L3/Thomson Thales/Aerosim devices.
Works on CAE built sims, not sure about L3/Thomson Thales/Aerosim devices.
Last edited by mcdhu; 23rd Dec 2016 at 08:06. Reason: Typo
Join Date: Jun 2006
Location: CASEY STATION
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
The actual selections would depend on which type of A320 simulator you are using.
Options include;
1. A touch reposition (accessed from the MAP page I think from memory )
You could then use the slew function (POSITION CONTROL - Aircraft Slew) to set HDG / SPEED / ALT etc or adjust position FWD / AFT / LEFT / RIGHT etc. Or just start from a standard in flight position and use the slew function. You could also enter the LAT/LONG ( if you know it ) from the slew page.
2. If this is a regular position then first time take a snap shot which can be recalled later ( Simulator Control - Snapshots ).
This is for a THALES A320 simulator
I am sure your instructor would know how ?
Options include;
1. A touch reposition (accessed from the MAP page I think from memory )
You could then use the slew function (POSITION CONTROL - Aircraft Slew) to set HDG / SPEED / ALT etc or adjust position FWD / AFT / LEFT / RIGHT etc. Or just start from a standard in flight position and use the slew function. You could also enter the LAT/LONG ( if you know it ) from the slew page.
2. If this is a regular position then first time take a snap shot which can be recalled later ( Simulator Control - Snapshots ).
This is for a THALES A320 simulator
I am sure your instructor would know how ?