MODE S Operation while airborne
Thread Starter
Join Date: Mar 2007
Location: Here,there and everywhere
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
MODE S Operation while airborne
One short question for you "people in the best offices in the world" especially bus drivers ...
Are you able to reselect your MODE S identification during the flight? And how do you do it?( is it enough if you retype your Flight number in your FMS or there's other way to achieve this?)
Why do i ask?
Recently MODE S radar was implemented into the system at my unit. Although we still function and provide radar identification based on the "regular" Mode A method, from time to time we get a small warning mark next to certain flights whos MODE S identification doesn't correspond to that in their current flight plans. During the low traffic periods I sometimes check with pilots of such "erroneous" Mode S settings to "RE-ENTER MODE -S AIRCRAFT IDENTIFICATION" ..which is an ICAO published phrase for such occurences. The responses from pilots are sometimes awkward ...from .. we can't do that ... to some who clearly don't even understand what I'm asking ... If time permits I try to explain in plain language what I would like them to do ..that is.. to put the correct Flight number into whatever box they should ...lol
And there that myth arose somehow ..that airbuses and certain types of A/C are not able to do that while airborne...
So I would like to get the firsthand clarification from you guys
Regards from the green radar pastures bellow
Are you able to reselect your MODE S identification during the flight? And how do you do it?( is it enough if you retype your Flight number in your FMS or there's other way to achieve this?)
Why do i ask?
Recently MODE S radar was implemented into the system at my unit. Although we still function and provide radar identification based on the "regular" Mode A method, from time to time we get a small warning mark next to certain flights whos MODE S identification doesn't correspond to that in their current flight plans. During the low traffic periods I sometimes check with pilots of such "erroneous" Mode S settings to "RE-ENTER MODE -S AIRCRAFT IDENTIFICATION" ..which is an ICAO published phrase for such occurences. The responses from pilots are sometimes awkward ...from .. we can't do that ... to some who clearly don't even understand what I'm asking ... If time permits I try to explain in plain language what I would like them to do ..that is.. to put the correct Flight number into whatever box they should ...lol
And there that myth arose somehow ..that airbuses and certain types of A/C are not able to do that while airborne...
So I would like to get the firsthand clarification from you guys
Regards from the green radar pastures bellow
Last edited by 1999; 29th Mar 2012 at 01:09.
Join Date: Nov 2000
Location: Netherlands
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Never having done so but it would only entail changing the flight code on the route page in the FMS. Don't know if you can do that inflight but see no reason why not.
Fly boeings
Below an excerpt from the manual about entry of flight number on the FMS route page, no mention that this cannot be done inflight.
6 Flight Number (FLT NO)
Valid entry is any flight crew entered flight number. The FMC sends flight number to each ATC transponder for flight ID function.
Flight crew entered or uplinked.
Flight number displays in PROGRESS page title.
Data line blanks at flight completion.
Transponder transmits flight number to ATC when Eurocontrol-compliant transponder installed.
Fly boeings
Below an excerpt from the manual about entry of flight number on the FMS route page, no mention that this cannot be done inflight.
6 Flight Number (FLT NO)
Valid entry is any flight crew entered flight number. The FMC sends flight number to each ATC transponder for flight ID function.
Flight crew entered or uplinked.
Flight number displays in PROGRESS page title.
Data line blanks at flight completion.
Transponder transmits flight number to ATC when Eurocontrol-compliant transponder installed.
Thread Starter
Join Date: Mar 2007
Location: Here,there and everywhere
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Flyburg , thanx for your reply ... I was asking myself the same question - why on earth and at this stage of technology one would not be able to type a few letters and numbers ...
One thing in particular I've noticed on the subject mentioned - the most usual mishaps are A/C Flight numbers from the previous flight. I would assume when you download your FPL via ACARS such errors couldn't happen presumably the A/C Fl.No. would be correct there ?
"If It ain't Boeing, I ain't going" LOL
Thanx for your input my friend.
Tot ziens
One thing in particular I've noticed on the subject mentioned - the most usual mishaps are A/C Flight numbers from the previous flight. I would assume when you download your FPL via ACARS such errors couldn't happen presumably the A/C Fl.No. would be correct there ?
"If It ain't Boeing, I ain't going" LOL
Thanx for your input my friend.
Tot ziens
Airbus FMS2 now allows a simple amendment to the callsign, previously you would have to reinitialize the flight through the secondary flight plan. Maybe some did not know how to do this.
Join Date: Nov 2003
Location: in the south
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
on 737 it seems to depend on the transponder fit, some you enter it in the FMC and some need it entered into the transponder. Some transponders don't have the facility ie only sqk input.
Have been asked to change it airborne as forgot to change it from previous sector ! but used txpdr input to do it.
Have been asked to change it airborne as forgot to change it from previous sector ! but used txpdr input to do it.
Thread Starter
Join Date: Mar 2007
Location: Here,there and everywhere
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Uhhmmm ... Capt Scribble, now that explains it all .. so obviously there were really some limitations in that regard.
We are all prone to "forget" or not being comfortable with certain things we don't use often ... MODE S resetting is obviously one of them.
If some who check out this thread get reminded how to do it, we did a good thing with this discussion .
Thanx for your input guys.
We are all prone to "forget" or not being comfortable with certain things we don't use often ... MODE S resetting is obviously one of them.
If some who check out this thread get reminded how to do it, we did a good thing with this discussion .
Thanx for your input guys.
Join Date: Jan 2001
Location: uk
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
It's a shame that when you put your flight number in the FMS that it does not also display said flight number on the ND display for all the flight. I might be able to remember my flight number for the day then.
Join Date: Nov 2000
Location: Netherlands
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Don't have the ability to download the flight plan on my aircraft, but what would occasionally happen is that we would have a different flight number and callsign.
For example in Europe to avoid similar callsign Confusion and for some reason lately to the states. Crews would inadvertently input the flight number in the FMS instead of the ATC callsign. In Europe for example klm1237 instead of klm37D, or something along those lines. Both are given on the flight plan but if you are in a rush, easy to overlook!
Tot ziens.
For example in Europe to avoid similar callsign Confusion and for some reason lately to the states. Crews would inadvertently input the flight number in the FMS instead of the ATC callsign. In Europe for example klm1237 instead of klm37D, or something along those lines. Both are given on the flight plan but if you are in a rush, easy to overlook!
Tot ziens.
Join Date: Jun 2002
Location: Vega Constellation
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
hapzim
the flight number on ND would be nice indeed, but it is displayed in FPLN page on the top line, it is also available in numerous other menus, and the PROG page as well as submenu "report".
Personaly, I just look at the top of FPLN page when making or receiving a call, however, it is not displayed there if you have an offset. So just press the PROG page.
the flight number on ND would be nice indeed, but it is displayed in FPLN page on the top line, it is also available in numerous other menus, and the PROG page as well as submenu "report".
Personaly, I just look at the top of FPLN page when making or receiving a call, however, it is not displayed there if you have an offset. So just press the PROG page.
previously you would have to reinitialize the flight through the secondary flight plan
My current steed (Q400) has Universal FMS which allows trouble-free change of callsign in any phase of the flight, which comes pretty handy when Langen or Munich ATCOs diligently point out someone has made a typo during preflight FMS preparation.
Join Date: Jul 2000
Location: U.S.A.
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
A possibility....if the aircraft is transmitting an ADS-B "out" signal, there is a possibility that the call sign is different than the one programmed into the FMS. In transport aircraft, the ADS-B information is normally transmitted through Mode S. It can be transmitted through other data links.
Do you know...does your display have a priority to display ADS-B call sign vs. the "normal" Mode S/FMC call sign?
Do you know...does your display have a priority to display ADS-B call sign vs. the "normal" Mode S/FMC call sign?
Join Date: Feb 2012
Location: UK
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
The most common retrofit on smaller GA aircraft is the Garmin (GTX330 I think) which as far as I have found needs to be turned off and back on again to change the flight ID. I have done so a couple of times, after warning the ATSU that I will stop squawking for a minute or two.
Join Date: Sep 2007
Location: Among camels and dunes
Posts: 425
Likes: 0
Received 0 Likes
on
0 Posts
Yes, it can be reset in the Airbus
Yes, it can be reset in-flight A346. We got airborne one night from SYD and immediately, for various reasons had to do a tech stop into SIN and was given a revised FLT number to entered with a "B" attached.
We then changed the FLT number in the MCDU thru the ACARS if I can remember, or on the secondary and activated it. But either way it can be changed! Although it was a while back.
Can be changed in the B777 in-flight too.
We then changed the FLT number in the MCDU thru the ACARS if I can remember, or on the secondary and activated it. But either way it can be changed! Although it was a while back.
Can be changed in the B777 in-flight too.
It's not uncommon, on occasions when an incorrect Mode S flight ID has been set on an eastbound LHR departure, to see it being corrected when the aircraft gets to the FIR boundary and starts to talk to Maastricht.
Seems to happen on both Boeings and Airbuses.
Seems to happen on both Boeings and Airbuses.
Thread Starter
Join Date: Mar 2007
Location: Here,there and everywhere
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Shore guy .. if you ask me abouth those details.. unfortunately I don't have such an in-depth knowledge ...that's more in the field of technicians expertise ...
I'm just a poor sod sitting in front of the radar screen somewhere in Europe. But as I mentioned earlier according to my experiance the majority of the erroneous indications are plain and simple typos ...e.g. AF1234 instead of AFR1234 (i'm using this just as an example not pointing blame on a given airliner) , and "left over" flight numbers from the previous sectors.
I'm just a poor sod sitting in front of the radar screen somewhere in Europe. But as I mentioned earlier according to my experiance the majority of the erroneous indications are plain and simple typos ...e.g. AF1234 instead of AFR1234 (i'm using this just as an example not pointing blame on a given airliner) , and "left over" flight numbers from the previous sectors.
1999, during what phase of flights are you seeing these errors? And what are the consequences of having an incorrect ID?
It might be one thing to spot this if the flight is en route and the crew has some time to fix the data error. But if its on approach, they might be a bit too busy to figure out a little used procedure.
By 'consequences', I'm also wondering what affect this kind of error might have on other systems like TCAS, ADS-B, etc.
It might be one thing to spot this if the flight is en route and the crew has some time to fix the data error. But if its on approach, they might be a bit too busy to figure out a little used procedure.
By 'consequences', I'm also wondering what affect this kind of error might have on other systems like TCAS, ADS-B, etc.
Join Date: Mar 2001
Location: I wouldn't know.
Posts: 4,499
Likes: 0
Received 0 Likes
on
0 Posts
There should be no effect whatsoever on TCAS, on ADS-B/C of course the wrong ID is transmitted which might lead to problems.
As europe is moving slowly to radar allocation via Mode-S ID a very low failure rate is becoming more and more important. Currently Mode-S ID allocation with a blank 2000 squawk is used only on dedicated routes, however the number of routes is slowly increasing and in the end most of europe should work that way.
At the moment my outfit gets a letter each month with every wrongly entered Mode-S ID, however we are below the magic 1% for quite some time now, but still trying to improve that figure of course.
As europe is moving slowly to radar allocation via Mode-S ID a very low failure rate is becoming more and more important. Currently Mode-S ID allocation with a blank 2000 squawk is used only on dedicated routes, however the number of routes is slowly increasing and in the end most of europe should work that way.
At the moment my outfit gets a letter each month with every wrongly entered Mode-S ID, however we are below the magic 1% for quite some time now, but still trying to improve that figure of course.