How to Set Gyro and Tail neutral
Thread Starter
Join Date: Mar 2010
Location: ny
Age: 42
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
How to Set Gyro and Tail neutral
Just find the solution about how to set Gootch GT450V3'sGyro and Tail neutral from someone. But i am not very sure if its right . Could anyone can help?
Recommend to choose Head lock type for Gyro and turn off recolution mixing(RVMX)model on the transmitter ,then set the gain switch on the transmitter and the gyro to head lock mode.The gain setting is about 70% and afer transmitter setting ,connect to the helicopter power for working on tail neutral setting .When connecting to the helicopter power , can not touch tail rudder stick and the helicopter .Then wait for 3seconds ,make the tail servo hom and tail servo at a right angle 90degrees,tail pitch assembly must be correctly fixed about in the middle of the tracel of tail rotor shaff for standard neutral setting .
Your good suggestions will be apprecaited!
Thx
Recommend to choose Head lock type for Gyro and turn off recolution mixing(RVMX)model on the transmitter ,then set the gain switch on the transmitter and the gyro to head lock mode.The gain setting is about 70% and afer transmitter setting ,connect to the helicopter power for working on tail neutral setting .When connecting to the helicopter power , can not touch tail rudder stick and the helicopter .Then wait for 3seconds ,make the tail servo hom and tail servo at a right angle 90degrees,tail pitch assembly must be correctly fixed about in the middle of the tracel of tail rotor shaff for standard neutral setting .
Your good suggestions will be apprecaited!
Thx
Join Date: Jul 1999
Location: U.K.
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
In case you were wondering, this question is about radio controlled helicopters and not the type we fly!
Also the originator of this thread owns a radio control shop and is probably just phishing for new business!
Also the originator of this thread owns a radio control shop and is probably just phishing for new business!