Go Back  PPRuNe Forums > Ground & Other Ops Forums > Questions
Reload this Page >

Help with circling now

Wikiposts
Search
Questions If you are a professional pilot or your work involves professional aviation please use this forum for questions. Enthusiasts, please use the 'Spectators Balcony' forum.

Help with circling now

Thread Tools
 
Search this Thread
 
Old 16th Jul 2009, 18:44
  #1 (permalink)  
Thread Starter
 
Join Date: Apr 2009
Location: Copenhagen
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Question Circling procedure

Hi
What is the correct Missed approach procedure for circling according to the rules?

Is it really a turn to the landing runway?. (So it will be a turn overhead the airport?).

Thanks in advance for answers

Last edited by MD82MD82; 20th Jul 2009 at 07:52.
MD82MD82 is offline  
Old 16th Jul 2009, 19:03
  #2 (permalink)  
Warning Toxic!
Disgusted of Tunbridge
 
Join Date: Jan 2005
Location: Hampshire, UK
Posts: 4,011
Likes: 0
Received 0 Likes on 0 Posts
Turn towards the airfield and carry out the missed approach procedure for the instrument approach you were originally carrying out, not for the runway you are landing on.

Don't question it. Just do it. You are expected to hash something together following the above. The aim is to stay within the airport safety zone initially then climb away on your original approach, not the final approach.

That's it. Period.
Rainboe is offline  
Old 17th Jul 2009, 18:13
  #3 (permalink)  
 
Join Date: Jun 2006
Location: Europe
Posts: 716
Likes: 0
Received 0 Likes on 0 Posts
If below MDA/beyond MAPt you are in fact more or less on your own. PANS-OPS/TERPS do not cater for this possibility. If you need an escape route, do the best you can; but common sense says the mountain is probably not on the airport, so a climbing turn towards the airport, until you are above the OAS, and thus in a position to have obstacle clearance as a function of the IAP, would probably be wise. Some companies have their own escape procedures to follow, should visual reference be lost after circling is commenced.
bfisk is offline  
Old 18th Jul 2009, 10:44
  #4 (permalink)  
 
Join Date: Jun 2002
Location: Wor Yerm
Age: 68
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Turn towards the airfield and carry out the missed approach procedure for the instrument approach you were originally carrying out, not for the runway you are landing on.
Is the standard missed approach, but there are exceptions, like in Holland. There, from a circling approach, you execute the missed approach for the runway you you are landing on.

Don't you just love exceptions...

PM
Piltdown Man is offline  
Old 18th Jul 2009, 19:16
  #5 (permalink)  
Warning Toxic!
Disgusted of Tunbridge
 
Join Date: Jan 2005
Location: Hampshire, UK
Posts: 4,011
Likes: 0
Received 0 Likes on 0 Posts
This was flogged to death a year or so ago. We have circling approaches and we have 'landing on the other parallel runway'. On many circling approaches, it would be impossible to fly a GA as on the original runway. If, say, 8 miles out your are switched to a new runway of similar alignment, you would be a fool to fly a different G/A to the runway you are actually landing on. A genuine circling approach is a different case,often onto a different runway, or the reciprocal, with limited or no aids and a G/A to reflect that. They are different animals. It is also really just academic- they are very, very rare.
Rainboe is offline  
Old 18th Jul 2009, 21:09
  #6 (permalink)  
 
Join Date: Mar 2000
Location: Arizona USA
Posts: 8,571
Likes: 0
Received 0 Likes on 0 Posts
They are different animals. It is also really just academic- they are very, very rare.
Yup, all too true.
411A is offline  
Old 18th Jul 2009, 23:04
  #7 (permalink)  
 
Join Date: May 2001
Location: London,England
Posts: 1,389
Likes: 0
Received 1 Like on 1 Post
you execute the missed approach for the runway you you are landing on.
Don't forget that on most circling approaches there won't be a missed approach for the landing runway because there is no approach procedure, that is why you are circling to it.
Max Angle is offline  
Old 19th Jul 2009, 00:03
  #8 (permalink)  

Bottums Up
 
Join Date: Feb 2000
Location: dunnunda
Age: 66
Posts: 3,440
Likes: 0
Received 1 Like on 1 Post
Interesting,
but at least in OZ it is mandated in our AIP that the first manoeuvre during a missed approach from a circling procedure is to "make a turn towards the runway environment."
in the version of the AIP in my Jeppesen Airways Manual [Terminal>AU-21>3.10.3]
When a missed approach is required from visual circling, the expectation is that the pilot will make an initial climbing turn toward the landing runway ...
Take circling for RW33 at Cairns as an example. Turning towards the runway if executing a missed approach from downwind takes one towards a mountain range that precludes any circling west of the RW and encompasses an MSA of 6500'.

Whereas, turning away from the runway, takes one over the sea.

I don't believe that an expectation is mandatory.
Capt Claret is offline  
Old 19th Jul 2009, 07:06
  #9 (permalink)  
Per Ardua ad Astraeus
 
Join Date: Mar 2000
Location: UK
Posts: 18,579
Likes: 0
Received 0 Likes on 0 Posts
I don't believe that an expectation is mandatory.
- nor, I believe is it an expectation that you will always turn 'the shortest way' - a modicum of self-preservation is expected in crews!
BOAC is offline  
Old 19th Jul 2009, 13:57
  #10 (permalink)  
 
Join Date: Jun 2006
Location: Europe
Posts: 716
Likes: 0
Received 0 Likes on 0 Posts
I guess this is why we need pilots on board planes, and not just system operators -- there are a lot of variables
bfisk is offline  
Old 20th Jul 2009, 12:11
  #11 (permalink)  
Warning Toxic!
Disgusted of Tunbridge
 
Join Date: Jan 2005
Location: Hampshire, UK
Posts: 4,011
Likes: 0
Received 0 Likes on 0 Posts
I don't understand the Cairns reference above, which seems to cloud the issue. The philosophy of circling is that you descend on the best possible aid to circling limit, then keeping the airfield in sight, reposition yourself, keeping the airfield in sight (vis may be down to just a few miles)- try and get yourself on a downwind or base leg and keep in sight and get it on the ground. Any loss of visual contact requires a GA, turn towards the airfield and GA. So how can Cairns have mountains in the way of that? Are you indeed, on a circling approach, allowing terrain between you and the airfield? Any peculiarities with terrain are always reflected in special instructions on the landing plates specifically for circling approaches.

It seems to me you always turn towards the airfield and then pick up the original GA. You might be doing some peculiar turns, but it will be overhead the airfield within a guaranteed (safe) column of air.
Rainboe is offline  
Old 6th Aug 2009, 17:27
  #12 (permalink)  
A4

Ut Sementem Feeceris
 
Join Date: Jul 1999
Location: UK
Posts: 3,464
Received 152 Likes on 31 Posts
What about go-around from EARLY base leg? Let's say you're on left base and you lose visual. Do you A) turn towards the runway i.e. a left turn and keep it going all the way round to join the published MA procedure or B) Turn RIGHT to join the MA procedure.......

Late base or final is more clear cut.

Over to you.

A4
A4 is offline  
Old 6th Aug 2009, 22:51
  #13 (permalink)  
Dit
 
Join Date: Apr 2006
Location: Europe
Posts: 108
Likes: 0
Received 0 Likes on 0 Posts
I'd keep going left, as you should be pretty confident the area you just circled in will be clear of other traffic, so you can, in effect do 270 (or whatever)to pick up the MA.

Turning right may take you over the centerline, which should alse be clear, but personally I'd pick the former.
Dit is offline  
Old 7th Aug 2009, 02:08
  #14 (permalink)  
 
Join Date: Jun 2001
Location: Fragrant Harbour
Posts: 4,787
Received 7 Likes on 3 Posts
The whole idea of the Circling approach is that you should remain visual in the visual segment, therefore you are not in the same situation as flying the instrument approach part and it is less likely.

However, you may have to go round for other reasons. It it looks as if a go around is possible due to other factors such as a strong crosswind, ask ATC what they would like you to do. We have a destination in my company's network where Circling is common due to there being no instrument approach being available on one runway because of a mountain being in the way. If you were to fly to a position where you could fly the MA for the instument approach for the oppsoite runway, then you would probably meet the next guy coming down the procedure and it would be chaos.

So I always ask what ATC what they would want me to do and the answer is usually different each time due to other traffic or weather conditions, but never what is published.
Dan Winterland is offline  
Old 7th Aug 2009, 16:24
  #15 (permalink)  
 
Join Date: Aug 2003
Location: ubiquitous
Posts: 230
Likes: 0
Received 0 Likes on 0 Posts
D.W. could I ask what destination that is? Just pure curiousity really. If for whatever reason you can't post such info on the board, I understand.
Cheers.
Eddie_Crane is offline  
Old 9th Aug 2009, 13:18
  #16 (permalink)  


PPRuNeaholic
 
Join Date: Jun 2000
Location: Cairns FNQ
Posts: 3,255
Likes: 0
Received 0 Likes on 0 Posts
Lightbulb

If I'm going to circle off an approach, I brief it carefully in advance. This includes a comparison of the circling MDA with the elevation of surrounding terrain, with particular emphasis on the lowest terrain for an escape route. There could be more than one reason why you might need to use the manoeuvre - losing visual reference is the usual one but it isn't the only one.

The circling manoeuvre is more than just making a close circuit to another runway and shouldn't be cobbled together at the very last possible moment.
OzExpat is offline  
Old 9th Aug 2009, 15:42
  #17 (permalink)  
Per Ardua ad Astraeus
 
Join Date: Mar 2000
Location: UK
Posts: 18,579
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by DW
If you were to fly to a position where you could fly the MA for the instument approach for the oppsoite runway, then you would probably meet the next guy coming down the procedure and it would be chaos.
- you will find that where g/a's clash with the IAP ATC normally allow for one g/a to go back up the approach path in their spacing of arrivals - eg Innsbruck.

One hopes Chambery do as well - but I have my doubts......................
BOAC is offline  
Old 11th Aug 2009, 21:52
  #18 (permalink)  
 
Join Date: Jun 2001
Location: Fragrant Harbour
Posts: 4,787
Received 7 Likes on 3 Posts
D.W. could I ask what destination that is?

Pusan, Korea. It's a TERPS airfileld with a 2.3 NM circling radius compared with the PANSOPS 4.6. A Air China 767 forgot this in 2001 and flew into a hill here. A very challenging destination.

- you will find that where g/a's clash with the IAP ATC normally allow for one g/a to go back up the approach path in their spacing of arrivals - eg Innsbruck

In an ideal world. On my last approach into Pusan, we nearly went around just as the next guy was starting his visual segment. It would have been messy.
Dan Winterland is offline  
Old 12th Aug 2009, 07:44
  #19 (permalink)  
Per Ardua ad Astraeus
 
Join Date: Mar 2000
Location: UK
Posts: 18,579
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by DW
In an ideal world.
- yes, I was in that world..... I have no useful suggestions for Pusan other than......................... As for TERPs - I have never been able to understand the logic of 2.3nm., and it has killed quite a few.
BOAC is offline  
Old 12th Aug 2009, 09:16
  #20 (permalink)  
 
Join Date: Mar 2000
Location: Arizona USA
Posts: 8,571
Likes: 0
Received 0 Likes on 0 Posts
I have never been able to understand the logic of 2.3nm....
Two general reasons, IMO...
It allows the basic circling minima (600-2, terrian permitting) for a category D airplane, that otherwise would be restricted to a higher minima, and...

It weeds out those who cannot from those who can (fly the airplane properly within close tolerances, at a two mile circling distance.
411A is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.