Hamburg airport EDDH
Thread Starter
Joined: May 2006
Posts: 15
Likes: 0
From: EGCC
Hamburg airport EDDH
We often nominate EDDH as an alternate but I have never been there. I know there are two long runways - do they have any preferred runway and are there any restrictions on using either of these? Can you expect any delays when they're using one particular runway??
I know I can look at the plates etc. but I'mm off work and in any case it would be good to hear from people who operate out of there regularly!
Thanks!
I know I can look at the plates etc. but I'mm off work and in any case it would be good to hear from people who operate out of there regularly!
Thanks!

Joined: Mar 2000
Posts: 1,450
Likes: 5
From: UK
Went there last night for the first tme. 05 seems to be preferred but they were using 15 last night due strong winds. After a terrific turnround (thanks chaps) and an on-time arrival back in London we had to wait 30 mins for a %^^**&&ing bus to pick us up at Heathrow.

Joined: Jan 2003
Aviation Qualifications: ATPL
Posts: 279
Likes: 17
From: Europe
EDDH, RWYs 05/23, 15/33 offering following approaches:
05: CAT1, LLZ, NDB-DME, RNAV
23: CAT3b, LLZ, NDB-DME, RNAV
15: CAT1, LLZ, NDB-DME, RNAV
33: LLZ+DME, RNAV
Prefered RWY combination (wind permitting) is 23 for LDG, 33 for T/O (expect departure from RWY 33 intersection I-North, T/O shift is 316m).
At nighttimes (again wind permitting) often LDG RWY 15 due to noise abatement.
LDG RWY 33 is very rarely used (personally, I landed only once there during the last 5 years).
APU usage is restricted to 5 mins after on-block.
That is all I can remember at the moment without looking at my Route Manual.
DBate
05: CAT1, LLZ, NDB-DME, RNAV
23: CAT3b, LLZ, NDB-DME, RNAV
15: CAT1, LLZ, NDB-DME, RNAV
33: LLZ+DME, RNAV
Prefered RWY combination (wind permitting) is 23 for LDG, 33 for T/O (expect departure from RWY 33 intersection I-North, T/O shift is 316m).
At nighttimes (again wind permitting) often LDG RWY 15 due to noise abatement.
LDG RWY 33 is very rarely used (personally, I landed only once there during the last 5 years).
APU usage is restricted to 5 mins after on-block.
That is all I can remember at the moment without looking at my Route Manual.
DBate




