LHR "grooved" Runway?!
Thread Starter
Join Date: Jan 2002
Location: South, UK
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
LHR "grooved" Runway?!
Hello everyone,
I just wanted to find out if LHR has grooved runways? This came about as LHR never says that it has a "wet" runway on the ATIS. The only way that this could possibly be is if the runways were grooved (in which case they are technically dry for a/c performance).
In our airline I am quite often critisised for briefing to use dry performance figures out of LHR and am told to use wet (eg if the ground is wet) - even though the runway is grooved! What do others do?
Any ideas?!
I just wanted to find out if LHR has grooved runways? This came about as LHR never says that it has a "wet" runway on the ATIS. The only way that this could possibly be is if the runways were grooved (in which case they are technically dry for a/c performance).
In our airline I am quite often critisised for briefing to use dry performance figures out of LHR and am told to use wet (eg if the ground is wet) - even though the runway is grooved! What do others do?
Any ideas?!
Last edited by flymeboy; 9th Jan 2006 at 14:56.
Join Date: Apr 2002
Location: Farnham, Surrey. ENGLAND
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Re: LHR "grooved" Runway?!
Yes, they're both grooved from the last re-surfacing (2000/2001 AFAIK), prior to which they had been surfaced with a Porous Friction Course.
Last edited by BLK 33; 9th Jan 2006 at 15:04.
Join Date: Oct 2002
Location: Heathrow
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Re: LHR "grooved" Runway?!
Quite often at LHR when the weather is "wet" the runway is visibly dry. I have taxied out on wet taxiways a number of times to find a dry runway. This might also be a function of the number of movements as well as the surface. I still use wet take off performance when we request the figures - although in practice it makes no difference unless a reverser is locked out or the runway is short - at least for us.
Join Date: Mar 2004
Location: Scotland
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Re: LHR "grooved" Runway?!
answer depends on the authority responsible for your airline. As far as i'm aware the uk caa dont permit the use of dry performance on a wet runway for either grooved or pfc, although your company can apply for a deviance from the regulation for specific reasons. irish authorities do allow it on grooved surfaces and there is mention of it in jar ops if i search hard. why bother though use wet perf coz your company will only try to force you into short strips in the wet if they think your game for it.
Join Date: Sep 2004
Location: Down at the sharp pointy end, where all the weather is made.
Age: 74
Posts: 1,684
Likes: 0
Received 3 Likes
on
3 Posts
Re: LHR "grooved" Runway?!
Originally Posted by Red Four
If you have PFC can you then groove the runway, or does it need to be re-surfaced in something else before/whilst grooving?
Having worked with both surfaces over the years, in the long term I think that the better surface is the grooved Marshall asphalt. PFC works well when new, but does tend to break up badly in later life, causing operational problems as well as maintenance issues. It does of course get clogged up with rubber, as do the grooves, but grooves can be cleaned out. Also, PFC is a bit of a nightmare in the Winter. Potentially, if you get moisture in the pores and it freezes, it will blow the surface, whereas ice in grooves not only doesn't damage the surface, it doesn't reduce the friction much, either!
It's standard procedure to lay the Marshall asphalt first, leave it for a few days to 'go off', then cut the grooves. The problem with this is you have a potentially slippery surface if it rains before the grooves get cut. Asphalt is notorious for 'sweating' oils through the surface when it's newly laid.
Cheers,
The Odd One
