A321s in the wind
Thread Starter
Join Date: Aug 2002
Location: Bristol (Trumpton International), United Kingdom
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
A321s in the wind
I work at Bristol Airport where we have a based First Choice A321. A few times now, latest time was today, its had to divert across the channel because the winds were too strong for it to land at Trumpton International. I’d be interested to hear why the A321 is affected by winds while other aircraft are not. I’ve been lead to believe it has something to do with the flaps.
Thanks
Thanks
Join Date: Jul 2003
Location: Cheshire
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Hmm,
A pure guess here, but it could be that the crosswinds exceeded the limit for landing (21kts I think for the A321).
Perhaps it headed for an airport where they could approach "into" the wind?
A pure guess here, but it could be that the crosswinds exceeded the limit for landing (21kts I think for the A321).
Perhaps it headed for an airport where they could approach "into" the wind?
Join Date: Jun 2000
Location: underground
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
The crosswind limit for A321 ...............
demonstrated for takeoff..29knots gusting up to 38knots
demonstrated for landing..33knots gusting up to 38knots
so I doubt it was that !!
However, there is a current OEB relating to A321's which requires a CONF 3 landing when significant CROSSWIND, or MOD. to SEV. Turbulence is anticipated, especially in ICING !
This procedure would require the approach speed to be increased, so increasing the landing distance required.
All this is corrected by new ELAC standards which are under design by Airbus, and should be fitted soon. We hope
Moley.
demonstrated for takeoff..29knots gusting up to 38knots
demonstrated for landing..33knots gusting up to 38knots
so I doubt it was that !!
However, there is a current OEB relating to A321's which requires a CONF 3 landing when significant CROSSWIND, or MOD. to SEV. Turbulence is anticipated, especially in ICING !
This procedure would require the approach speed to be increased, so increasing the landing distance required.
All this is corrected by new ELAC standards which are under design by Airbus, and should be fitted soon. We hope
Moley.