Go Back  PPRuNe Forums > Non-Airline Forums > Private Flying
Reload this Page >

Piper Tomahawk tail oscillation

Wikiposts
Search
Private Flying LAA/BMAA/BGA/BPA The sheer pleasure of flight.

Piper Tomahawk tail oscillation

Thread Tools
 
Search this Thread
 
Old 31st Jan 2022, 16:13
  #1 (permalink)  
Thread Starter
 
Join Date: Jan 2022
Location: Madrid
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Piper Tomahawk tail oscillation

Good day!
I've recently began flying a traumahawk as CFI and long story short, let's just say that the airplane could be in better conditions and I've only two hours on the type (I also have to say that I found it very fun to fly)

The one thing that scares me a little bit is the horizontal stabilizer, during straight and level flight it tends to oscillate a bit in the horizontal axis, like a very small flutter effect.
I know that in this model this kind of effect is normal during a stall, but I would like to know if this can also be applicable at other flight stages. The owner and another guy I know with many hours on the type say it's normal, but I'd like to confirm if this is something that needs to be checked.

​​​​​​Thanks!



Last edited by Mario172; 1st Feb 2022 at 09:05.
Mario172 is offline  
Old 31st Jan 2022, 18:28
  #2 (permalink)  
Moderator
 
Join Date: Aug 2006
Location: Ontario, Canada
Age: 63
Posts: 5,614
Received 60 Likes on 43 Posts
Yes, some oscillation is normal, but, of course, too much is very bad! Check that the rudder has no freeplay. If there has been previous firewall damage, rudder rigging is more difficult, and they can be a bit loose, this would enhance oscillation. And, check that there is no freeplay in the elevator. Otherwise, unless something appears unairworthy, don't worry too much about it (and don't look back during stalls!)
Pilot DAR is offline  
Old 31st Jan 2022, 22:55
  #3 (permalink)  
 
Join Date: Nov 2004
Location: UK
Posts: 572
Received 73 Likes on 21 Posts
Originally Posted by Mario172
The one thing that scares me a little bit is the horizontal stabilizer, during straight and level flight it tends to oscillate a bit in the vertical axis, like a very small flutter effect.
I know that in this model this kind of effect is normal during a stall, but I would like to know if this can also be applicable at other flight stages.
Oscillating 'in the vertical axis' means yawing - did you really mean that? Or are you asking about an oscillation in pitch about the lateral axis?
pilotmike is offline  
Old 1st Feb 2022, 00:06
  #4 (permalink)  
 
Join Date: Jan 1997
Location: UK
Posts: 7,737
Likes: 0
Received 0 Likes on 0 Posts
Long term Tommy oddity - only 4 ribs per side on that horizontal stab...

Rob
PPRuNe Towers is offline  
Old 1st Feb 2022, 07:09
  #5 (permalink)  
Thread Starter
 
Join Date: Jan 2022
Location: Madrid
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by pilotmike
Oscillating 'in the vertical axis' means yawing - did you really mean that? Or are you asking about an oscillation in pitch about the lateral axis?
You're right, I'm referring to an oscillation in pitch about the lateral axis

Originally Posted by Pilot DAR
Yes, some oscillation is normal, but, of course, too much is very bad! Check that the rudder has no freeplay. If there has been previous firewall damage, rudder rigging is more difficult, and they can be a bit loose, this would enhance oscillation. And, check that there is no freeplay in the elevator. Otherwise, unless something appears unairworthy, don't worry too much about it (and don't look back during stalls!)
Thanks for your answer!
The rudder is fine, but I'll check the elevator more carefully on the next flight.
The airplane has recently undergone maintenance due to an accident and I'm pretty sure the firewall was damaged, so this may be contributing as well
Mario172 is offline  
Old 1st Feb 2022, 09:45
  #6 (permalink)  
Moderator
 
Join Date: Aug 2006
Location: Ontario, Canada
Age: 63
Posts: 5,614
Received 60 Likes on 43 Posts
I have certainly flown airplanes which were not "fine" following repairs from an accident - including a Tomahawk. I have no idea the condition of the plane you're discussing, but I make no assumptions either. If the firewall of a Tomahawk has been damaged, the rudder cable pulleys there could have been displaced a little, and this can result in inadequate adjustment of rudder cable tension. Unlike Cessnas, with floppy rudders, the rudder of a Tomahawk should be firm to the nosewheel steering. 'Just on thing to check. That said, my experience with T tail airplanes (and I own one) is that T tails do tend to move around more noticeably than conventional tails, so some movement is not necessarily reason for concern - as long as all structure is as it should be, and there is no freeplay in flight controls.
Pilot DAR is offline  
Old 1st Feb 2022, 12:13
  #7 (permalink)  
 
Join Date: Oct 2017
Location: Bressuire
Posts: 823
Likes: 0
Received 12 Likes on 9 Posts
The woes of the Piper Tomahawk are legendary. A Camel designed by a committee. I have flown many Tomahawks of which only one flew without this continuous twisting. It is interesting reading Pilot DAR's commenst regarding the nose wheel assembly and its effect on the rudder. The nose wheel is attached to the aircraft into a collar at the leading end of the engine frame. This is subject to considerable stress and wear during take-off and landing. Distortion following heavy nose wheel landings is difficult to measure during routine servicing or during a post accident survey. The high tail plane benefits little from the propeller slipstream: its impossible to raise the nose wheel sufficiently below +/- 40kts. and also to hold off on landing below this speed. It is critically important to centralise the rudder and lower the nose to the ground whilst you have the speed. The vibration from the sideways position of the nose wheel when in contact with the ground is distinctive.
Fl1ingfrog is online now  
Old 1st Feb 2022, 17:22
  #8 (permalink)  
 
Join Date: Mar 2009
Location: UK
Posts: 334
Received 7 Likes on 3 Posts
Quite a few light aircraft horizontal tails vibrate or oscillate a bit in flight - just don't look back if you are flying a Super Cub or a Pawnee for example ! The tails may be wire braced but they still vibrate.
The Grob 109's horizontal tail also shows light oscillation occasionally in cruising flight, and more evidently when flying engine off, presumably because of the turbulence off the stopped prop or perhaps off the cockpit area with the change in airflow. T tails will accentuate these - ho0efully small - motions because of the moment arm.

I hope that is some reassurance, though I did think the last Tomahawk I flew felt a bit 'squirrely', perhaps because of that.
s
.
biscuit74 is offline  
Old 2nd Feb 2022, 15:52
  #9 (permalink)  
 
Join Date: Jun 2002
Location: Manchester MAN
Posts: 6,643
Received 74 Likes on 46 Posts
A video showing tail vibration in a spin. Nice music too!

India Four Two is offline  
Old 4th Feb 2022, 22:23
  #10 (permalink)  
 
Join Date: Mar 2009
Location: UK
Posts: 334
Received 7 Likes on 3 Posts
Thanks for that India Four Two - most impressive, or alarming...

Or perhaps reassuring ; Traumahawks have been doing that for years and still fly ~safely.
biscuit74 is offline  
Old 5th Feb 2022, 07:30
  #11 (permalink)  
 
Join Date: Jun 2002
Location: Manchester MAN
Posts: 6,643
Received 74 Likes on 46 Posts
I did several spins in Tomahawks a long time ago. I had much prior experience of spinning in Chipmunks and also in gliders. I thought the Tomahawk's spin was the most dramatic and impressive of any aircraft I had flown. However I did not look over my shoulder to see the tail – I had not heard the tail vibration stories at that time.
India Four Two is offline  
Old 5th Feb 2022, 18:10
  #12 (permalink)  
 
Join Date: Apr 1999
Location: In front of a computer
Posts: 2,359
Received 95 Likes on 37 Posts
However I did not look over my shoulder to see the tail
I did

Checking out a trusted friend in a new Tomahawk I asked if he could show me a multi turn spin from altitude. I had heard a strange “oil-canning” sound in previous details and was interested to see what was causing it.

The severe oscillation of horizontal tail had me call out “RECOVER NOW”……
ETOPS is online now  
Old 7th Feb 2022, 22:15
  #13 (permalink)  
 
Join Date: Jan 2002
Location: Aberdeen
Posts: 219
Received 0 Likes on 0 Posts
I Traimed in Tomahawks in 1980 with a British company called Curzon Flight. Operated out of Redbird just south of Dallas. Quirky aircraft. N2584N s engine stopped after 3 rotations in a spin. 20 years later I read the accident report that she killed instructor and student in spin training.
However, getting back to the subject of the T tail. My instructor warned me not to allow rearward flight after a stall. The tail isn’t stressed for a tail slide and will fold apparently.
exlatccatsa is online now  
Old 7th Feb 2022, 22:24
  #14 (permalink)  
Moderator
 
Join Date: Aug 2006
Location: Ontario, Canada
Age: 63
Posts: 5,614
Received 60 Likes on 43 Posts
My instructor warned me not to allow rearward flight after a stall. The tail isn’t stressed for a tail slide and will fold apparently.
I think that is excellent advice for any airplane, unless it is specifically approved for tail slides!
Pilot DAR is offline  
Old 8th Feb 2022, 14:34
  #15 (permalink)  
 
Join Date: Mar 2002
Location: near an airplane
Posts: 2,794
Received 52 Likes on 42 Posts
Surely a normal stall entry should never end up with a tail slide.....?
Jhieminga is offline  
Old 8th Feb 2022, 15:06
  #16 (permalink)  
 
Join Date: Jan 2002
Location: Aberdeen
Posts: 219
Received 0 Likes on 0 Posts
Originally Posted by Jhieminga
Surely a normal stall entry should never end up with a tail slide.....?
But when you're in the initial stages of training, surely nothing is normal?
exlatccatsa is online now  
Old 8th Feb 2022, 17:21
  #17 (permalink)  
 
Join Date: Mar 2002
Location: near an airplane
Posts: 2,794
Received 52 Likes on 42 Posts
I fully agree, and I have experienced many a botched (approach to) stall, but never to the point of nearing a tail slide. Perhaps I've been lucky so far.
Jhieminga is offline  
Old 8th Feb 2022, 19:06
  #18 (permalink)  
 
Join Date: Oct 2007
Location: Moray,Scotland,U.K.
Posts: 1,777
Received 5 Likes on 5 Posts
Could a trainer get into a tailslide even with a full power stall? Without a sharp pull-up from speed?
Maoraigh1 is offline  
Old 27th Feb 2022, 19:41
  #19 (permalink)  
 
Join Date: Aug 2005
Location: UK
Posts: 435
Received 0 Likes on 0 Posts
I was going to ask why on earth a little single-engined aircraft needs a T-tail until I saw my self-inflicted irony
Russ
Russell Gulch is offline  
Old 28th Feb 2022, 08:42
  #20 (permalink)  
Moderator
 
Join Date: Apr 2001
Location: various places .....
Posts: 7,185
Received 94 Likes on 63 Posts
No fuel in tanks except "unusable" equals exhaustion

Not necessarily. Depends on the aircraft configuration. The idea of the unusable tests is to cover modest turbulence. Often, you might have a bit more in reasonably balanced, smooth flight. You can't plan on it but it might just help in suitable aircraft if the aim is to get that extra mile or two out of it.

Could a trainer get into a tailslide even with a full power stall? Without a sharp pull-up from speed?

Why would you be doing that sort of thing ? Possibly be useful to have a read of certification stall procedures for run of the mill aircraft ....
john_tullamarine is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.