Identify the missing instrument!
Gnome de PPRuNe



Joined: Jan 2002
Aviation Qualifications: Spotter
Posts: 15,200
Likes: 1,202
From: Too close to Croydon for comfort
Thread about id'ing a Turbulent project in Sussex over on the Flypast - included a link to a nice article by James Gilbert which appeared in Flying in 1971.
Click here...
Click here...

Joined: Sep 2004
Posts: 1,684
Likes: 3
From: Down at the sharp pointy end, where all the weather is made.
treadigraph,
Thanks for the link to the '71 magazine. While we're on the subject of panels, look at the magazine advert for the Bellanca Viking. It's advertising the panel as being must up-to-date. I have to say that the distribution of the instruments is most definitely NOT what we'd expect to see today. The DI and AI are transposed, the ASI is where the turn co-ordinator would normally be and the TC itself is in the middle of the panel, about where you'd find the transponder! I guess we've come a long way in 45 years...
TOO
Thanks for the link to the '71 magazine. While we're on the subject of panels, look at the magazine advert for the Bellanca Viking. It's advertising the panel as being must up-to-date. I have to say that the distribution of the instruments is most definitely NOT what we'd expect to see today. The DI and AI are transposed, the ASI is where the turn co-ordinator would normally be and the TC itself is in the middle of the panel, about where you'd find the transponder! I guess we've come a long way in 45 years...
TOO
Joined: Jul 2012
Posts: 158
Likes: 0
From: Scotland
Thanks from me too for the link, treadi, but reading it has provided yet another illustration of my failing memory. I knew the story about trimming the prop on Stoma, halfway between Caithness and Orkney, but in my memory Neil Williams was the culprit.
Gnome de PPRuNe



Joined: Jan 2002
Aviation Qualifications: Spotter
Posts: 15,200
Likes: 1,202
From: Too close to Croydon for comfort
DeltaV, Neil Williams' part in "The Caithness Saga" involved landing one of the "single seat" Super Tigers in a remote and sheep filled Scottish pasture
to pack James Baring into the front cockpit (along with sundry baggage and the cockpit fairing) after Baring's Turb had split an oil line and force landed in the field!
There wasn't much room for Baring as that was where Rollason's had relocated the fuel tank during the mod to Super Tiger standard so I think he stood and clutched the cabane struts!
I think half the Tiger Club fleet had flown up to Caithness for a display and the adventures and tales of the trip were many and varied!
to pack James Baring into the front cockpit (along with sundry baggage and the cockpit fairing) after Baring's Turb had split an oil line and force landed in the field! There wasn't much room for Baring as that was where Rollason's had relocated the fuel tank during the mod to Super Tiger standard so I think he stood and clutched the cabane struts!
I think half the Tiger Club fleet had flown up to Caithness for a display and the adventures and tales of the trip were many and varied!
Joined: Jul 2012
Posts: 158
Likes: 0
From: Scotland
treadigraph, thank's for reassuring me that I'm not completely gaga. I knew Neil Williams was involved somehow even if I mis-remembered the actual detail.
The 'Flying circus' to Caithness was at Castletown airfield, I believe.
Oh, and don't try that on Stroma these days. No one lives there now and the lighthouse is unmanned. The sheep farmers visit periodically in the summer months but other than that you'd be on your own.
The 'Flying circus' to Caithness was at Castletown airfield, I believe.
Oh, and don't try that on Stroma these days. No one lives there now and the lighthouse is unmanned. The sheep farmers visit periodically in the summer months but other than that you'd be on your own.
Joined: Sep 2016
Posts: 1
Likes: 0
From: ft.lauderdale
continental 0300. trying to figure where the tach and temperature guage comes off mot
hey guys. I have a continental 0300 and when I bought the engine it has no temp guage or a tachometer. I was wondering if you guys could help me figure out where they go on the motor. or is it something I can wire up. thanks guys.







