Oil check: Piper Warrior
Join Date: Feb 2002
Location: oxford
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
That's a bit unkind, XXTSGR. Everbody's got to learn sometime, you know. In my book, the most important virtue for any pilot is humility. Never be ashamed to admit you don't know. That way, you might learn, and in doing so, you might save someone's life - even your own.
Don't put down people who are only trying to learn.
Don't put down people who are only trying to learn.
Join Date: Oct 2000
Location: England
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
On most of these Lycoming or Continental engines the dipstick is combined with the oil filler cap. If, when you unscrew the oil filler cap it doesn't withdraw a long dipstick then it has broken off from the cap and fallen down the filler tube out of reach. There is usually a baffle to prevent it going right into the oil sump, but the aircraft is u/s until you get it out and fit a new filler cap / dipstick.
I should ignore the clever dicks and their less-than-helpful replies. In my opinion, if you don't know the answer you are only going to find it by looking it up or by asking someone who knows. Best plan is to get someone to show you on the aircraft. They can then also show you how tight to do up the oil filler. Many are damaged by overtightening and on the older spring-clip type, if you don't ensure all the clips engage, then the filler can come off in flight allowing oil to escape and the oil pressure to fall. One of our group members had this happen to him. Fortunately he spotted it in time, landed, and saved the engine (and himself).
I should ignore the clever dicks and their less-than-helpful replies. In my opinion, if you don't know the answer you are only going to find it by looking it up or by asking someone who knows. Best plan is to get someone to show you on the aircraft. They can then also show you how tight to do up the oil filler. Many are damaged by overtightening and on the older spring-clip type, if you don't ensure all the clips engage, then the filler can come off in flight allowing oil to escape and the oil pressure to fall. One of our group members had this happen to him. Fortunately he spotted it in time, landed, and saved the engine (and himself).
Dir. PPRuNe Line Service
When you've got the cowling open to check the oil, have a good look at the engine. Does it all look right? Are their any cracks on the exhaust? Any around the top of the plugs? Any oil leaks? Any lose or damaged cables or hoses? and so on...
Find an instructor with an interest in aero engines to show you what to look for. I find it all pretty fascinating...
Mik
Find an instructor with an interest in aero engines to show you what to look for. I find it all pretty fascinating...
Mik
Join Date: Apr 1999
Location: Dundee, Scotland
Age: 61
Posts: 1,272
Likes: 0
Received 0 Likes
on
0 Posts
XXTSGR, why shouldn't people ask questions, however basic, on this forum? I don't think it's the case that everyone who posts is already qualified, and if you're sitting at home with no POH in your bookshelf and no instructor handy, where better to ask?
Speedbird, ask away old chap - although with that username people may assume you will know a few things already.
Speedbird, ask away old chap - although with that username people may assume you will know a few things already.
Speedbird,I agree with all of the above..
However...this sort of stuff should have been demonstrated to you by an Instructor before you intro-flt..or wil me demo-d to you at your intro-flt.....no worries mate!
However...this sort of stuff should have been demonstrated to you by an Instructor before you intro-flt..or wil me demo-d to you at your intro-flt.....no worries mate!
Join Date: Jan 2002
Location: Blackbushe
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
When you open the starboard cowling, the dipstick will be the most prominent thing in front of you. A 1.5 inch wide tube with a screw cap. Undo the cap & hopefully, 1 dipstick.
Take some kitchen tissues & you could then wipe the dipstick to get a good look at the difference on the dipstick between the 6 & 8 marks.
And don't put it back on too tight. The next pilot wont thank you for it!
As mentioned above, get someone familiar with the plane to show you everything, not just the engine, all the hinges, clips, pull rods....
BtB
Take some kitchen tissues & you could then wipe the dipstick to get a good look at the difference on the dipstick between the 6 & 8 marks.
And don't put it back on too tight. The next pilot wont thank you for it!
As mentioned above, get someone familiar with the plane to show you everything, not just the engine, all the hinges, clips, pull rods....
BtB