Go Back  PPRuNe Forums > Non-Airline Forums > Private Flying
Reload this Page >

Interesting facts for PPL holders

Wikiposts
Search
Private Flying LAA/BMAA/BGA/BPA The sheer pleasure of flight.

Interesting facts for PPL holders

Thread Tools
 
Search this Thread
 
Old 21st Apr 2013, 15:55
  #1 (permalink)  
Thread Starter
 
Join Date: Sep 2012
Location: uk
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Interesting facts for PPL holders

Hi,

Though I would start a thread where we could all post a useful fact for Students/PPL holders:

I'll begin with....


If for some strange reason you forget the landing speed of your aircraft, you can work it by the following method. Do a stall in the landing configuration and take note of the speed at which your aircraft stalls, then multiply this speed by 1.3 and it will give you an approximate landing speed. For example, an aircraft stalls at 54KT, therefore multiple this by 1.3 and you get 70KT as your VAT (speed at threshold)

Your turn...
pilot in command is offline  
Old 21st Apr 2013, 16:38
  #2 (permalink)  
 
Join Date: Aug 2005
Location: EGSX
Age: 56
Posts: 177
Likes: 0
Received 0 Likes on 0 Posts
Couldn't you just multiply the minimum white arc speed by 1.3?
TractorBoy is offline  
Old 21st Apr 2013, 16:44
  #3 (permalink)  
 
Join Date: Sep 2006
Location: Scotland
Age: 84
Posts: 1,434
Likes: 0
Received 0 Likes on 0 Posts
Was it Alex Henshaw who used to stall the currently being tested Spitfire in the downwind at <1000ft & then land accordingly?
Crash one is offline  
Old 21st Apr 2013, 18:50
  #4 (permalink)  
 
Join Date: Dec 1999
Location: Oop North, UK
Posts: 3,076
Likes: 0
Received 0 Likes on 0 Posts
It is unlikely that you would "forget" the landing speed of an aircraft you have been flying, but there are occasions you might not KNOW the landing speed - I flew an Isaacs Fury, the person who had flown it before had crashed it twice, the first thing I did once airborne was climb to height and stall it, only to find the speed he had written down for approach speed was 2 kts above the indicated stall speed, there have been a couple of other times I have had to do this as well, but never because I have forgotten a known speed.
foxmoth is offline  
Old 21st Apr 2013, 21:50
  #5 (permalink)  
 
Join Date: Sep 2006
Location: 23, Railway Cuttings, East Cheam
Age: 68
Posts: 3,115
Likes: 0
Received 0 Likes on 0 Posts
1. Whenever you really want to track a VOR it mysteriously stops tramsmitting at it's published range, in fact any range at all >15nm.

2. Hares will sit on the runway right where you want to touch down. They have a book of plates in their brains and travel the country to do this.

3. When you turn around to grab the map that you should have had in the front from out of your flight bag a flying machine of some description will be 'Where did he come from' close when you turn around again.

4. You can spot other a/c all day long with your eagle eyes but as soon as Air Tragic telll you you have traffic crossing left to right at two miles your level can you hellers like spot it. It's invariably your non pilot passenger with specs like milk bottom bottoms that sees it first. Always fly with poorly sighted passengers for that reason.

5. No one sees the ninety nine out of a hundred greaser landings you do. The one in a hundred that is an affront to mankind is performed always at a fly in.

6. When the metman says it's going to be 2k vis with 500' cloudbase it's really going to be a CAVOK day. When he says it's going to be CAVOK day it's 2k vis with 500' cloudbase. It's a game they play.

7 When flying over water, engines start playing mind games. It's the only chance they get.
thing is offline  
Old 22nd Apr 2013, 18:13
  #6 (permalink)  
 
Join Date: Nov 2010
Location: EU
Posts: 628
Likes: 0
Received 0 Likes on 0 Posts
6. When the metman says it's going to be 2k vis with 500' cloudbase it's really going to be a CAVOK day. When he says it's going to be CAVOK day it's 2k vis with 500' cloudbase. It's a game they play.
This one is especially true.
pudoc is offline  
Old 22nd Apr 2013, 19:21
  #7 (permalink)  
 
Join Date: Aug 2007
Location: 18nm NE grice 28ft up
Posts: 1,129
Likes: 0
Received 0 Likes on 0 Posts
Most four seat aircraft aren't.

D.O.
dont overfil is offline  
Old 22nd Apr 2013, 19:28
  #8 (permalink)  
 
Join Date: Oct 2011
Location: In a hole somewhere
Age: 46
Posts: 378
Likes: 0
Received 0 Likes on 0 Posts
Hahaha

I agree with thing on all counts!
Pilot.Lyons is offline  
Old 22nd Apr 2013, 19:46
  #9 (permalink)  
 
Join Date: Oct 2007
Location: fort sheridan, il
Posts: 1,656
Likes: 0
Received 0 Likes on 0 Posts
your DG has little marks on it for a reason...little hacks at 45 degrees all around...they are there to help you orient yourself while entering the patter (US style).
sevenstrokeroll is offline  
Old 22nd Apr 2013, 23:14
  #10 (permalink)  
 
Join Date: Jan 2004
Location: Canada
Age: 63
Posts: 5,212
Received 135 Likes on 62 Posts
For a fast back of the envelope calculation of fuel flow when the POH is not handy, Knock the last zero off the horsepower and that will be your fuel flow at takeoff power in US Gal/hr. Half of that will be your fuel flow at 65 % power.

eg 150 hp engine = 15 Gal/hr at full throttle and 7.5 Gal/hr at 65 % power.

Last edited by Big Pistons Forever; 22nd Apr 2013 at 23:17.
Big Pistons Forever is offline  
Old 26th Apr 2013, 09:31
  #11 (permalink)  
 
Join Date: Feb 2003
Location: Oxford
Posts: 2,042
Likes: 0
Received 0 Likes on 0 Posts
sevenstrokeroll,

They are handy for flying holds, too, in conjunction with the similar ones on the ADF. For those prehistoric countries still using NDB, of course...

Tim
tmmorris is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.