Go Back  PPRuNe Forums > Non-Airline Forums > Private Flying
Reload this Page >

Pilot's Engineering and Technical Knowledge


Notices
Private Flying The forum for discussion and questions about any form of flying where you are doing it for the sheer pleasure of flight, rather than being paid!

Pilot's Engineering and Technical Knowledge

Old 26th July 2010 | 10:58
  #1 (permalink)  
Thread Starter
 
Joined: Feb 2003
Posts: 126
Likes: 0
From: Kemble, Cotswolds, UK
Pilot's Engineering and Technical Knowledge

Does anyone know of a good source for the kind of knowledge of the engineering principles behind SEP aircraft and their systems that a pilot needs to know?

I am talking of general information on topics like those examples below, rather than extremely detailed technical info that might be presented in a POH/FM or manufacturer's specification. Nor am I talking scientific explanations of the principles of flight or aerodynamics.

e.g.
Variable Pitch Propellers
Aircraft Engines (e.g. magnetos etc. etc.)
Fuel/Air Mixture

I am a relatively newly quailified PPL and would appreciate the wise words of those who have been doing it a while.

Where did you get your best information? Spending time with an engineer? Text books? Articles? LAA struts/aircraft builders? Manufacturer's documentation?
JamesTigris is offline  
Reply
Old 26th July 2010 | 11:08
  #2 (permalink)  
Moderator
30 Countries Visited
25 Anniversary
Veteran: Reserves
 
Joined: Feb 2000
Aviation Qualifications: CPL
Posts: 14,480
Likes: 178
From: UK
This is an excellent book and commonly used in aeronautical engineering undergraduate courses.

Also, there is much to be learned from helping maintain the aeroplanes you are flying - talk perhaps to private owners, or if you join a syndicate see what you can do to muck in. Even doing the regular cleaning, it's amazing how much you learn.

POHs are generally pretty simplistic documents, but quality time crawling around the aeroplane (pick a rainy day when nobody else wants to fly) with the POH is always worthwhile.

G
Genghis the Engineer is offline  
Reply
Old 26th July 2010 | 11:42
  #3 (permalink)  
 
Joined: Apr 2003
Posts: 2,359
Likes: 0
From: Midlands
If you join the LAA you will get a lot of this in the magazine. The LAA run courses, which may be of interest, but if you turn up at your local strut and ask you will probably get roped in to help. One of the principles of the LAA is to educate people about light aviation.

Rod1
Rod1 is offline  
Reply
Old 26th July 2010 | 21:31
  #4 (permalink)  
 
Joined: Feb 2008
Posts: 159
Likes: 0
From: Basingstoke
I'd imagine an ATPL Aircraft General Knowledge book would have most of what you're after. Have a trawl of flea-bay.
XXPLOD is offline  
Reply
Old 26th July 2010 | 22:11
  #5 (permalink)  
Fleet Manager
Community Builder
50 Countries Visited
15 Anniversary
 
Joined: Aug 2006
Aviation Qualifications: CPL
Posts: 7,090
Likes: 2,952
From: Ontario, Canada
James,

I suggest a read through FAR Part 23, which you should be able to get to fromhere. http://rgl.faa.gov/Regulatory_and_Gu...meset?OpenPage The information in there will give you a good understanding of what the aircraft must demonstrate to be certified. If you fly Cessnas, I also recommend "Cessna, Wings for the World". It well describes the development and testing of the Cessna 100 and 200 series, from the test pilot's perspective.
Pilot DAR is online now  
Reply
Old 27th July 2010 | 00:41
  #6 (permalink)  
15 Anniversary
 
Joined: Jan 2007
Posts: 78
Likes: 0
From: San Francisco, California, USA
this is a top notch book for any level.
barrow is offline  
Reply
Old 27th July 2010 | 07:00
  #7 (permalink)  
20 Anniversary
 
Joined: Jun 2003
Posts: 13,787
Likes: 0
From: EuroGA.org
I think a lot depends on why the OP wants to know it. If it is to pass exams, then the "right" books are essential. If it is to acquire detailed systems knowledge of a particular aircraft, then the best way is to obtain the operating manuals for the avionics, etc and study those.

Piston engine management is quite a big field too, and John Deakin wrote a lot on it.
IO540 is offline  
Reply
Old 27th July 2010 | 08:16
  #8 (permalink)  
25 Anniversary
 
Joined: Jan 1999
Posts: 6,209
Likes: 2
From: north of barlu
I find the technical knowlage of the average new PPL is very poor, normaly this is due to the instructor being more interested in his future jet job than taking the student pilot over to the hangar on a poor weather day and showing the student over an aircraft.

My favorite questions when doing a check flight are "how long will the engine run after the failure of the alternator?" and "at what altitude can you lean the engine?".

It is very unusual to get one correct answer!

Last edited by A and C; 27th July 2010 at 17:58.
A and C is offline  
Reply
Old 27th July 2010 | 10:55
  #9 (permalink)  
Moderator
30 Countries Visited
25 Anniversary
Veteran: Reserves
 
Joined: Feb 2000
Aviation Qualifications: CPL
Posts: 14,480
Likes: 178
From: UK
AandC, whilst I agree - it's not the new PPL who is at fault and full credit to the OP or any similar pilot who is trying to plug those knowledge gaps.

G
Genghis the Engineer is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.