Manifold Pressure Gauge
Thread Starter
Join Date: Jan 2001
Location: UK
Posts: 1,089
Likes: 0
Received 0 Likes
on
0 Posts
Manifold Pressure Gauge
I have a manifold pressure showing at 33 when engine stopped and also when running will not reduce below 29 (just occured on 3rd take off today). Now apart from a faulty gauge can any one suggest any other reason? Is it possible for the indicator needle to "slip" on the spline for example? All suggestions welcome.
Thanks
Thanks
The manifold guage will show atmospheric pressure when the engine is stopped. The only way it could show 33 in is if you were 3000 ft below ground level, therefore the guage is clearly broken. At the risk of being rude, I have to ask why did you even start this airplane let alone fly it three times ?
Thread Starter
Join Date: Jan 2001
Location: UK
Posts: 1,089
Likes: 0
Received 0 Likes
on
0 Posts
BPF - yes I would surmise the gauge is now faulty but i was asking for any other possible causes. BTW I did say it occured on the 3rd take off which was after we reached about 1000ft and about 20 miles from home base so we continued. Dont think you are rude but may i suggest you read the first post completely
Working hard
Sorry I misunderstood your post because I assumed the guage was reading 33in at start up not shut down. Anyway the guage is history and has probably expired from a perished diaphram or less likely an accumulation of guck inside which has gummed up the mechanism. There is nothing you can do to fix it other than having it overhauled or buying an exchange unit. The good news is exchange overhauled guages are not that expensive.
Sorry I misunderstood your post because I assumed the guage was reading 33in at start up not shut down. Anyway the guage is history and has probably expired from a perished diaphram or less likely an accumulation of guck inside which has gummed up the mechanism. There is nothing you can do to fix it other than having it overhauled or buying an exchange unit. The good news is exchange overhauled guages are not that expensive.
Moderator
With one exception, the manifold pressure gauge will be repairable, at a suitably qualified facility. The exception is an instrument of a vintage of 50 years or so, whose dial and/or pointer are painted with radioactive paint so as to glow. Those instruments are generally refused by instrument shops these days. Be careful even throwing them out, they are considered hazardous material. These are recognizable by pointers and/or graduations and numbers which are not bright white. They may be slightly greeny, or dingy brownish. DO NOT retain such an instrument for the mantle, it is a hazard out of the aircraft. If the markings are bright white, you'll be fine.
As for the problem at hand, yes, the internal mechanizm can gum up and slip. They are nearly always able to be cleaned and made to work well again. There are no non-metallic parts in most of these instruments, so nothing perishes in there, just gums up (small amounts of gasoline do get in there, and leave gunk over time). There is also a tiny adjustable orifice at the inlet to the instrument, which can gum up, though this will cause sticking, not an over indication.
Do not rely on the instrument for any further flying until fixed, very particularly if the aircrft is a turbo. Have a shop remove the instrument and send it for overhaul. While they're in there, the manifold pressure line should be blown out to the engine. Other than that, if the line is in good shape, there's nothing else to worry about.
Pilot DAR
As for the problem at hand, yes, the internal mechanizm can gum up and slip. They are nearly always able to be cleaned and made to work well again. There are no non-metallic parts in most of these instruments, so nothing perishes in there, just gums up (small amounts of gasoline do get in there, and leave gunk over time). There is also a tiny adjustable orifice at the inlet to the instrument, which can gum up, though this will cause sticking, not an over indication.
Do not rely on the instrument for any further flying until fixed, very particularly if the aircrft is a turbo. Have a shop remove the instrument and send it for overhaul. While they're in there, the manifold pressure line should be blown out to the engine. Other than that, if the line is in good shape, there's nothing else to worry about.
Pilot DAR
Join Date: Oct 2005
Location: USA
Posts: 3,218
Likes: 0
Received 0 Likes
on
0 Posts
Often with a manifold pressure gauge exhibiting this behavior, a little grease has entered the bourdon tube which connects the instrument with the induction manifold. The pressure trapped in the instrument creates a higher than normal reading.
Sometimes mechanics will use teflon tape when sealing the "b" nut on the back of the instrument; this is a common, but poor practice. The tape can work out of the threads on the b nut and cause a blockage. Generally the first step in trouble shooting this is to disconnect the manifold pressure line at both ends, and blow it out using shop air from the instrument-end. If this doesn't correct the problem, then submit the instrument for repair work.
Sometimes mechanics will use teflon tape when sealing the "b" nut on the back of the instrument; this is a common, but poor practice. The tape can work out of the threads on the b nut and cause a blockage. Generally the first step in trouble shooting this is to disconnect the manifold pressure line at both ends, and blow it out using shop air from the instrument-end. If this doesn't correct the problem, then submit the instrument for repair work.
Join Date: Dec 2004
Location: East Anglia
Posts: 832
Likes: 0
Received 0 Likes
on
0 Posts
The inlet to the gauge has a restrictor to dampen the movement to the pulses from the induction.
If you disconnect the pipe at the back you can put a screwdriver into the hole and undo the restrictor screw about 1/8th of a turn. Then reconnect the tube and run the engine and you should find that the problem is fixed. If the needle vibrates then tighten the screw again slightly.
If this doesn't fix it then it will need to be professionally dismantled and remantled together with payment of the normal £x00.
ZA
If you disconnect the pipe at the back you can put a screwdriver into the hole and undo the restrictor screw about 1/8th of a turn. Then reconnect the tube and run the engine and you should find that the problem is fixed. If the needle vibrates then tighten the screw again slightly.
If this doesn't fix it then it will need to be professionally dismantled and remantled together with payment of the normal £x00.
ZA
Moderator
screwdriver into the hole and undo the restrictor screw about 1/8th of a turn.
Thread Starter
Join Date: Jan 2001
Location: UK
Posts: 1,089
Likes: 0
Received 0 Likes
on
0 Posts
PPRUNE is an absolute gold mine of information. I am happy to leave my engineer to look after the mechanics of the aircraft as his knowledge is far greater than mine. I thought it interesting about the advice to not fly the aircraft with a faulty gauge. I am not sure I agree in this particular instance as it is only a gauge and if all other indications are correct then continue. My ears and eyes will suffice in place of a faulty gauge at least on a temporary basis but of course that is also dependant on which instrument is ault.
Thanks to one and all for the information.
Thanks to one and all for the information.
Thread Starter
Join Date: Jan 2001
Location: UK
Posts: 1,089
Likes: 0
Received 0 Likes
on
0 Posts
PPRUNE is an absolute gold mine of information. I am happy to leave my engineer to look after the mechanics of the aircraft as his knowledge is far greater than mine. I thought it interesting about the advice to not fly the aircraft with a faulty gauge. I am not sure I agree in this particular instance as it is only a gauge and if all other indications are correct then continue. My ears and eyes will suffice in place of a faulty gauge at least on a temporary basis but of course that is also dependant on which instrument is at fault.
Thanks to one and all for the information.
Thanks to one and all for the information.
I thought it interesting about the advice to not fly the aircraft with a faulty gauge. I am not sure I agree in this particular instance as it is only a gauge and if all other indications are correct then continue. My ears and eyes will suffice in place of a faulty gauge at least on a temporary basis but of course that is also dependant on which instrument is at fault.
.
.
Without a working MP guage you do not have
1) A direct indication that the engine is developing full power on takeoff
2) Indication of the development of carb ice
3) A valid Certificate of Airworthiness as the MP will be a required instrument
4) Valid insurance as a result of point 3
5) abitility to conform to any MP vs RPM restrictions
Join Date: Oct 2005
Location: USA
Posts: 3,218
Likes: 0
Received 0 Likes
on
0 Posts
I am not sure I agree in this particular instance as it is only a gauge and if all other indications are correct then continue.
The quick response here is likely that it's irrelevant...after all, it's a turbine, and we're all private pilots here, we don't talk turbines, yada, yada. The example is relevant, however, because it's an example of a situation in which a single instrument...the primary power instrument, was the only thing telling the story.
I've had a power loss in a twin commander while descending in which no change in yaw occurred. The only indication was the manifold pressure gauge. No feel, no sound difference...just a gauge indication.
Don't make the mistake of thinking you can disregard your required instruments in favor of your own eyes and ears. You may not know as much as you think you do, and that ignorance could cost you dearly.
Your aircraft isn't safe, nor legal without the required instrumentation. The airworthiness certificate becomes invalid so long as it's not in compliance. You don't have all the information necessary to safely operate your aircraft.
Get it fixed, then fly. Any other way is irresponsible.
Join Date: May 2001
Location: 75N 16E
Age: 54
Posts: 4,729
Likes: 0
Received 0 Likes
on
0 Posts
3) A valid Certificate of Airworthiness as the MP will be a required instrument
4) Valid insurance as a result of point 3
4) Valid insurance as a result of point 3
If the prop is left fully forward then the RPM cold be used as per a fixed pitch prop to get you home.
I read working hardpost's as implying he was prepared to continue to fly the aircraft without a working MP guage. If you takeoff knowing that guage is no working than the aircraft most certainly does not have a valid C of A and therefore the insurance is also likely invalid.
Moderator
If the prop is left fully forward then the RPM cold be used as per a fixed pitch prop to get you home
Does this mean you should not continue your flight home? Of course not! Generally, with some conservatism with power management, you'd have no problem completing a normal flight with no harm to anything.
Beginning another flight in that condition would, as mentoned, be another matter. Intending to takeoff in an aircraft with a known defect, and not in accordance with an approved minimum equipment list, puts huge responsibility on the pilot making that decision. Things like a U/S nav light for day only flight don't get most people too excited, but a primary engine instrument is more important than that!
There are many worse instrument failures than a manifold pressure gauge reading wrong. (Like my passenger suddenly shreeking in pain after takeoff in a C185 amphib. When I looked over, his bare legs (wearing shorts that day) were covered in very hot, black engine oil, from the oil pressure line which had just burst, behind the panel, over his knees! Do I want to go back to floating, with an engine I know I cannot start again? ) Some instrument failures require an immediate change to the flight plan, MP gauge... not so much..