Go Back  PPRuNe Forums > Non-Airline Forums > Private Flying
Reload this Page >

Pierced Steel Plank (Marston Mat)

Wikiposts
Search
Private Flying LAA/BMAA/BGA/BPA The sheer pleasure of flight.

Pierced Steel Plank (Marston Mat)

Thread Tools
 
Search this Thread
 
Old 14th Jul 2009, 13:16
  #1 (permalink)  
Thread Starter
 
Join Date: Sep 2004
Location: Glasgow
Posts: 115
Likes: 0
Received 0 Likes on 0 Posts
Pierced Steel Plank (Marston Mat)

Hi All,

I was wondering if anyone has had any experience of landing/operating on this stuff before? just curious really and are there any airfields that still use it?

If it was good enough in WW2 as a temp/semi permanent airstrip surely it would be good enough for a private strip here?

PSP Landing Mat | Calumet Industries
Chippik is offline  
Old 14th Jul 2009, 13:34
  #2 (permalink)  
 
Join Date: Jul 2007
Location: 51.50N 1W (ish)
Posts: 1,141
Received 30 Likes on 13 Posts
If you use it (and it is good for the purpose, although I don't know current cost and therefore economics) be careful that the odd one of the link 'hooks' doesn't get bent up and fails to link. With flexing they gradually bend up and make an excellent tyre destroyer. Once the whole mat is assembled, you can't do anything useful without complete disassembly, and it all distorts slightly making reassembly a right bugger.

Also, heavier aircraft using differential wheelbraking to turn can easily ruin tyres. We used the stuff for a while as a readiness pan in the far east until they laid a concrete one. and aircraft had to stop on the runway and be backed straight into position to taxi straight out, or else it was a double tyre change every sortie.
Fitter2 is offline  
Old 14th Jul 2009, 14:01
  #3 (permalink)  
 
Join Date: Jan 2002
Location: Aberdeen
Posts: 1,234
Likes: 0
Received 0 Likes on 0 Posts
I leased an airfield with a variation of this system. You have to say that it lasted pretty well for 50 years but....

Great for puncturing tyres and it needed some careful inspection and selective pruning to keep that potential down to a sensible level. Generally it was the vehicles - mowers, tractors etc that suffered more than the aircraft.

But you could not pull sections of it up without causing major disruption to the ground surface so lots of little holes and carefull cutting and bending were necessary.

But it did allow pretty heavy aircraft to operate from grass strips so is was pretty effective in its day. Given the choice for light aircraft - give it a miss - it is much more effort than the loads from light aircraft justify.
gasax is offline  
Old 14th Jul 2009, 14:36
  #4 (permalink)  
 
Join Date: Oct 2005
Location: USA
Posts: 3,218
Likes: 0
Received 0 Likes on 0 Posts
I've used a lot of PSP over the years. It's designed to rapidly turn an unprepared surface into an operating surface for aircraft, and to enable rapid repairs of an airfield. It's useful for putting over soft or unstable surfaces when walking, too.

If you have other choices, use them. PSP was never designed to be the ideal surface. It's an only choice in areas where rapid construction has required it's employment, and landing on it is no option. In other words, it's great when you've got nothing else. It's not so great if you have any other choice.
SNS3Guppy is offline  
Old 14th Jul 2009, 18:38
  #5 (permalink)  
 
Join Date: Nov 2001
Location: Norfolk
Age: 85
Posts: 298
Likes: 0
Received 0 Likes on 0 Posts
The choice these days is PERFO interlocking squares of hard wearing material with holes that the grass grows through. Seems to work but definitely not cheap.
PSP was only meant for very short term use in wartime and even then caused many problems.
rotorfossil is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.