Piper Archer & Century HSI
Thread Starter
Join Date: Nov 2005
Location: Up north
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Piper Archer & Century HSI
Looking for a bit of help.
Can anyone recommend a company or individual that has an in depth knowledge of the operation and repair of Century 360 NSD slaved HSI’s.
PM me if you wish.
Thanks
CFG
Can anyone recommend a company or individual that has an in depth knowledge of the operation and repair of Century 360 NSD slaved HSI’s.
PM me if you wish.
Thanks
CFG
Join Date: Jun 2003
Location: EuroGA.org
Posts: 13,787
Likes: 0
Received 0 Likes
on
0 Posts
A good contact for repairs of mechanical instruments is Pandect (do a google).
They quoted me £500 or so for doing the bearings on a stuck vacuum driven KI-256 horizon, which was otherwise perfect. I discovered this after I sent it to the USA for a $3000 exchange overhauled unit which turned out to be significantly off vertical
They quoted me £500 or so for doing the bearings on a stuck vacuum driven KI-256 horizon, which was otherwise perfect. I discovered this after I sent it to the USA for a $3000 exchange overhauled unit which turned out to be significantly off vertical
Join Date: Jan 1999
Location: north of barlu
Posts: 6,207
Likes: 0
Received 0 Likes
on
0 Posts
I have used R J calibration for a number of air driven gyros in the last year or so and can recomend them, it has got to be worth a phone call to see if they can fix your unit.
RJ Calibration
RJ Calibration
