flying suit kneeboard inserts
Thread Starter
Join Date: Nov 2001
Location: 1000ft above you, giving you the bird!
Posts: 579
Received 0 Likes
on
0 Posts
flying suit kneeboard inserts
hello,
asked on the military forum and had a few promises but nothing arrived.....
im after 1 set of kneeboard inserts for an raf flying suit to make a copy / pattern please - can any one help??
the mart aviation ones are not the real ones - i need the rounded edge ones clear and opaque please...
willing to pay postage to/from need them about 2 weeks before returning.
hope you can help - pm if you can
cheers
n
asked on the military forum and had a few promises but nothing arrived.....
im after 1 set of kneeboard inserts for an raf flying suit to make a copy / pattern please - can any one help??
the mart aviation ones are not the real ones - i need the rounded edge ones clear and opaque please...
willing to pay postage to/from need them about 2 weeks before returning.
hope you can help - pm if you can
cheers
n
Thread Starter
Join Date: Nov 2001
Location: 1000ft above you, giving you the bird!
Posts: 579
Received 0 Likes
on
0 Posts
Bose - Thats like asking me to land without rounding out - sorry need to make a pattern for the cnc machine so would like exact rather than guesstimate...!!!
Red On, Green On
Join Date: May 2004
Location: Between the woods and the water
Age: 24
Posts: 6,487
Likes: 0
Received 2 Likes
on
2 Posts
sorry need to make a pattern for the cnc machine
Top tip - don't try to use a 20p or a 50p coin
A-A, good to see initiative from an ex-RNEFTS stude, however the radius equates to the shape of a 1.5v battery.(AA size)
Join Date: Nov 2006
Location: just to the left of the filing cabinet
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
130mm x 165mm edge to edge (ie not at corners!)
both white and clear plastic sheets are 0.5mm thick
corners are 16mm radius
Judging by the rough edges, the originals seem to be stamped out of a sheet rather than cut, so the dimensions vary slightly by 1 to 2mm either way.
Hope this helps!
both white and clear plastic sheets are 0.5mm thick
corners are 16mm radius
Judging by the rough edges, the originals seem to be stamped out of a sheet rather than cut, so the dimensions vary slightly by 1 to 2mm either way.
Hope this helps!
RAF/RN/AAC Kneeboard Mk2
Does anyone know where I can obtain an RAF/RN/AAC Kneeboard Mk2 (manufactured by Beaufort Air Sea Equipment Ltd)?
This one recently sold on ebaY...
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=3100657 26824
This one recently sold on ebaY...
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=3100657 26824