lifevest maintenance
Thread Starter
Joined: Mar 2005
Posts: 18
Likes: 0
From: Switzerland
lifevest maintenance
Hi,
For occasional overwater trips I am considering buying a lifevest vs renting them. Now I was wondering whether those certified lifevests--I guess they all work with CO2--need any regular maintenance. Just have not yet found that information on the net. Anybody who would know?
Thank you.
For occasional overwater trips I am considering buying a lifevest vs renting them. Now I was wondering whether those certified lifevests--I guess they all work with CO2--need any regular maintenance. Just have not yet found that information on the net. Anybody who would know?
Thank you.
Joined: Jun 2007
Posts: 9
Likes: 0
From: Lightwater, Surrey
Life Vests do need checking annually once they have gone beyond three years old.
I carry out the following :-
a) Unfold, then unscrew the CO2 cartridge. Inspect the seal, reject if any damage and buy new - ships chandlers are a possible source.
b) Inflate useing the mouth tube. Leave 24hrs. If still rigid its OK. Deflate and refold, screwing the CO2 cartridge firmly back.
c) Note on the record sheet the date & initial
I carry out the following :-
a) Unfold, then unscrew the CO2 cartridge. Inspect the seal, reject if any damage and buy new - ships chandlers are a possible source.
b) Inflate useing the mouth tube. Leave 24hrs. If still rigid its OK. Deflate and refold, screwing the CO2 cartridge firmly back.
c) Note on the record sheet the date & initial
Joined: Jun 2007
Posts: 9
Likes: 0
From: Lightwater, Surrey
Ive carried out this procedure for years and the jackets are still OK.
While in theory moisture may be introduced, inpractice it doesnt matte as the material is relatively non absorbent.
This method was told me by a ships chandler and is common in the yatchie world.
While in theory moisture may be introduced, inpractice it doesnt matte as the material is relatively non absorbent.
This method was told me by a ships chandler and is common in the yatchie world.
Joined: Feb 2007
Posts: 4,598
Likes: 0
From: Amsterdam
Still, if you do have some means of mechanically inflating them, by using a toy boat pump or something, it's probably a bit better. But the manual of mine simply says "inflate orally" when it talks about testing.
And obviously check the CO2 cylinder and mechanism visually, but also put the CO2 cylinder on an accurate kitchen scale. Either the empty weight or the filled weight should be stamped on the cylinder, and you should also be able to find the amount of CO2 that's supposed to be in it (somewhere in the 30-35 grams area for an adult vest). Check the weight and you can be sure it's full, while a very small leak might not be detectable visually.
And obviously check the CO2 cylinder and mechanism visually, but also put the CO2 cylinder on an accurate kitchen scale. Either the empty weight or the filled weight should be stamped on the cylinder, and you should also be able to find the amount of CO2 that's supposed to be in it (somewhere in the 30-35 grams area for an adult vest). Check the weight and you can be sure it's full, while a very small leak might not be detectable visually.
Thread Starter
Joined: Mar 2005
Posts: 18
Likes: 0
From: Switzerland
Hi,
Thank you for the information. Really helpful. I just prefer to know that the lifevest will do its work in just that worst case, and this sort of check as described will help me to trust in them.
Courchevel
Thank you for the information. Really helpful. I just prefer to know that the lifevest will do its work in just that worst case, and this sort of check as described will help me to trust in them.
Courchevel
