building a spitfire in the garage
Thread Starter
Joined: Jun 2004
Posts: 21
Likes: 0
From: Surrey
building a spitfire in the garage
Interesting article about a lady building a Spitfire in her garage off original blue prints over at the Beeb:
http://news.bbc.co.uk/1/hi/england/l...re/4646888.stm
There's also a thread going over at "Aviation History and Nostalgia", but not sure if that was the right place to ask:
Would she eventually be able to fly this, assuming she's a pilot of course? I guess Permit to Fly would be the only option. And what sort of power plant could be used?
And most importantly, where can I get my hands on a set of blue prints ?
SF78
http://news.bbc.co.uk/1/hi/england/l...re/4646888.stm
There's also a thread going over at "Aviation History and Nostalgia", but not sure if that was the right place to ask:
Would she eventually be able to fly this, assuming she's a pilot of course? I guess Permit to Fly would be the only option. And what sort of power plant could be used?
And most importantly, where can I get my hands on a set of blue prints ?
SF78
Moderator
Joined: Feb 2000
Aviation Qualifications: CPL
Posts: 14,480
Likes: 178
From: UK
Quite probably, but it's the sort of energetic eccentricity that makes Britain what it is, and you can only respect that.
Spitfire 78 if you're serious, the PFA will sell you a set of plans for an approved Isaacs Spitfire replica in wood for a few hundred pounds.
G
Spitfire 78 if you're serious, the PFA will sell you a set of plans for an approved Isaacs Spitfire replica in wood for a few hundred pounds.
G
Joined: Dec 2004
Posts: 65
Likes: 0
From: unfortunately work
Genghis-
The engine cowl on the Isaacs spoils the lines too much for me.
The Jurca is a nicer job IMHO, at 75% (MJ10) or 100% (MJ100) scale.
Spit78-
There are others available, try a google search for spitfire replica's
The engine cowl on the Isaacs spoils the lines too much for me.
The Jurca is a nicer job IMHO, at 75% (MJ10) or 100% (MJ100) scale.
Spit78-
There are others available, try a google search for spitfire replica's
Joined: Dec 2004
Posts: 65
Likes: 0
From: unfortunately work
Spit 78- Don't forget if you intend to build in the uk the kit/plan has to be approved by the PFA
current list here- http://www.pfa.org.uk/pdfs/Hombuilt%...0by%20Type.pdf
if not on the list then you may be the first to seek approval - could be expensive.
Genghis- Agreed V nice but I think if I had that sort of money to spend I'd be buying/ building a Thunder Mustang
current list here- http://www.pfa.org.uk/pdfs/Hombuilt%...0by%20Type.pdf
if not on the list then you may be the first to seek approval - could be expensive.
Genghis- Agreed V nice but I think if I had that sort of money to spend I'd be buying/ building a Thunder Mustang
Joined: Jun 2003
Posts: 13,787
Likes: 0
From: EuroGA.org
Some months ago I read a great article in some aviation mag, explaining how Spit prices have risen so much in recent years that a number of commercial outfits have started up who will build one for you, even starting with a shoebox with some bits. Especially if the shoebox contains the original airframe ID plate, but the financial pressures are such that even that isn't really necessary.
Moderator
Joined: Feb 2000
Aviation Qualifications: CPL
Posts: 14,480
Likes: 178
From: UK
I had a fault middle of last year when I'd landed at Sandown.
In the time-honoured fashion, I knocked on the door of the nearest friendly looking hangar to ask if I could borrow the required tools to put it right. When I was invited in, I was rather surprised to see two Spitfires and a Hurricane under construction - a very impressive sight. I can think of worse ways to make your living, although the cashflow must be a little erratic.
(Plus they were very friendly, and helped get me in the air again, refusing any attempt to pay for the time and couple of bits I'd scrounged).
G
In the time-honoured fashion, I knocked on the door of the nearest friendly looking hangar to ask if I could borrow the required tools to put it right. When I was invited in, I was rather surprised to see two Spitfires and a Hurricane under construction - a very impressive sight. I can think of worse ways to make your living, although the cashflow must be a little erratic.
(Plus they were very friendly, and helped get me in the air again, refusing any attempt to pay for the time and couple of bits I'd scrounged).
G
Joined: Apr 2003
Posts: 2,359
Likes: 0
From: Midlands
Originally Posted by CDH
Spit 78- Don't forget if you intend to build in the uk the kit/plan has to be approved by the PFA
Rod1
Joined: Jun 2001
Posts: 1,014
Likes: 1
From: England
CHD,
How much does it cost to get a new type added to the PFA list??? and what do they do for the money. I can understand the certification work required if it has never flown but what if it is flying already somewhere else (such as the states)?
How much does it cost to get a new type added to the PFA list??? and what do they do for the money. I can understand the certification work required if it has never flown but what if it is flying already somewhere else (such as the states)?
Joined: Apr 2003
Posts: 2,359
Likes: 0
From: Midlands
Originally Posted by 18greens
CHD,
How much does it cost to get a new type added to the PFA list??? and what do they do for the money. I can understand the certification work required if it has never flown but what if it is flying already somewhere else (such as the states)?
How much does it cost to get a new type added to the PFA list??? and what do they do for the money. I can understand the certification work required if it has never flown but what if it is flying already somewhere else (such as the states)?
It does not necessarily cost anything to get on the list. You have to apply and get selected and the numbers of new designs each year, which get added, are very small. It has to be considered that it is in the member’s interest to investigate your design, and that there is space in the evaluation programme for it. This is the reason why at least one potential builder is considering going the CAA route as it gives a high degree of control, but at a cost.
Every 4 seat aircraft, which is registered to build, generates £2000 to the PFA from the manufacturer, to help pay for the engineering support. 2 seat designs pay nothing.
This is an area, which has been under review for some time.
As well as the PFA and the CAA you can also go to the BMAA.
Rod1
Joined: Dec 2004
Posts: 65
Likes: 0
From: unfortunately work
18G- In answer to your question, I don't know. Rod seems to have answered most of it though.
Have a look at the PFA website for more info http://www.pfa.org.uk/
Have a look at the PFA website for more info http://www.pfa.org.uk/
Joined: Sep 2003
Posts: 480
Likes: 3
From: Retford, UK
Going back to the original thread, is this really a rivet-for-rivet plans build of a Spitfire, or a 1:1 replica?
If it's never intended for it to fly it would seem bizarre to put all the effort into building the structure, the strength and lightness of which would never be needed.
If it is real, surely for one person it would be many thousands of hours to fabricate and build one from plans?
Puzzled...
If it's never intended for it to fly it would seem bizarre to put all the effort into building the structure, the strength and lightness of which would never be needed.
If it is real, surely for one person it would be many thousands of hours to fabricate and build one from plans?
Puzzled...
