Jura airfield??
Moderator
Join Date: Jul 1997
Location: Europe
Posts: 3,228
Likes: 0
Received 0 Likes
on
0 Posts
they're Paps not Bens
Beinn Shiantaidh (Holy Mountain)
Beinn an Oir (Mountain of Gold)
Beinn a'Chaolais (Mountain of the Sound)
Thread Starter
Join Date: Apr 2003
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
India-Mike, I would appreciate you reporting the runway length (from the ditch/road referred to above). Also the surface condition, how likely is my tailwheel to disappear into a rabbit hole?, or my spats to be grinding over loose stones?
It's the small stuff you can't see in a low pass that can cause trouble........
The approaches look OK in the photos.
It's the small stuff you can't see in a low pass that can cause trouble........
The approaches look OK in the photos.
Better red than ...
Join Date: Aug 2004
Location: Appleby-in-Westmorland Cumbria England
Posts: 1,412
Likes: 0
Received 0 Likes
on
0 Posts
The definitive answer for PPR is Tarbut Estates (01496 820 207) for clearance in advance.
Generally OK if nothing on the strip.
No landing fee.
The Jura Hotel (820243) have no responsibility for controlling the strip but can advise if you can't reach the Estate.
h-r
NB the date below is NOT relevant
Generally OK if nothing on the strip.
No landing fee.
The Jura Hotel (820243) have no responsibility for controlling the strip but can advise if you can't reach the Estate.
h-r
NB the date below is NOT relevant
Last edited by helicopter-redeye; 1st Apr 2005 at 12:46.
Guest
Posts: n/a
BB777
Just back from week on Islay - unable to make trip to Jura due high winds that resulted in ferry not running for 2 and a half days!
Even took my GPS this time as well....
Hope to be back over within next month to climb a Pap....will have another go then.
Sorry...
Just back from week on Islay - unable to make trip to Jura due high winds that resulted in ferry not running for 2 and a half days!
Even took my GPS this time as well....
Hope to be back over within next month to climb a Pap....will have another go then.
Sorry...
