Marker pen for Pooley's CRP-1 Computer
Thread Starter
Joined: Apr 2002
Posts: 142
Likes: 0
From: UK
Marker pen for Pooley's CRP-1 Computer
Can anyone recomend a marker pen brand that is easily erasable for the CRP-1 (wind side)?
I used a non-permanent one but it hardly writes on that surface. Using a permanent one make erasing the lines very difficult.
Any help appreciated.
Cheers
I used a non-permanent one but it hardly writes on that surface. Using a permanent one make erasing the lines very difficult.
Any help appreciated.
Cheers
Joined: Feb 2003
Posts: 104
Likes: 0
From: Worcester
Hi fonawah,
I just use a permanent marker and then erase it with Meths or another less smelly solvent based cleaner. I carry a small container in my flight bag.
I have seen people using chinagraph pencil before. I assume its just rubs away
Cheers,
F - Wyg
I just use a permanent marker and then erase it with Meths or another less smelly solvent based cleaner. I carry a small container in my flight bag.
I have seen people using chinagraph pencil before. I assume its just rubs away
Cheers,
F - Wyg
Why do it if it's not fun?

Joined: Jul 2001
Posts: 4,782
Likes: 12
From: Bournemouth
I popped into my local stationary shop. They only had one brand of non-permanent marker, so that's what I use - but I can't remember what it is! Will try to remember to bring it with me tomorrow and let you know the brand name.
FFF
-------------
FFF
-------------
Joined: Sep 2002
Posts: 1,784
Likes: 0
From: Savannah GA & Portsmouth UK
One of the miniature shampoo bottles you get in hotel bathrooms seems to hold a little meths without any problem. It's never leaked and holds less than a tablespoonful, considerably less that the quantity of avgas in the tanks. A small scrap of J cloth works fine for clearing the marker off both the computer and the chart.
Make sure you use meths or some other form of alcohol (e.g. isopropyl alcohol) and not other solvents such as acetone which can seriously ruin your CRP1.
I use fine point Staedtler or Mars Lumocolour overhead projector pens (permanent) which are available in a variety of colours.
Mike
Make sure you use meths or some other form of alcohol (e.g. isopropyl alcohol) and not other solvents such as acetone which can seriously ruin your CRP1.
I use fine point Staedtler or Mars Lumocolour overhead projector pens (permanent) which are available in a variety of colours.
Mike
Guest
Posts: n/a
A black chinagraph pencil works fine for me, although it needs to be fairly well sharpened. It just so happens that I always seem to have a chinagraph to hand but as an alternative, the black non-permie markers available at WH Smith work a treat too. Both may be easily wiped off with one's thumb.
Guest
Posts: n/a
I use the Staedtler Lumocolors on my CRP-1, best thing to use to erase the pen is nail polish remover.
Works a treat, the pen doesnt rub off like chinagraphs do, and you can stick a small bottle of it in your flight bag, my other half has one use nail polish remover pads which are in a sachet which are well handy.
Only minor drawback is that you have to be carefull using it as it will also remove the markings on the CRP-1 itself if you go a bit mad with the cloth.
Speedy
Works a treat, the pen doesnt rub off like chinagraphs do, and you can stick a small bottle of it in your flight bag, my other half has one use nail polish remover pads which are in a sachet which are well handy.
Only minor drawback is that you have to be carefull using it as it will also remove the markings on the CRP-1 itself if you go a bit mad with the cloth.
Speedy
Joined: Aug 2000
Posts: 343
Likes: 0
From: Around the world, at present in Indonesia & UK
Another solvent that is forgotten is, hairspray, the firmer hold the better.
Spray the hairspray on, rub the ink off & any residue can be removed by a damp cloth with a small amount of mild detergent. Doesn't effect the plastic too.
FB
Spray the hairspray on, rub the ink off & any residue can be removed by a damp cloth with a small amount of mild detergent. Doesn't effect the plastic too.
FB
Joined: Mar 2003
Posts: 17
Likes: 0
From: In a Galaxy, far, far away.........
Guys, a really simple answer to your probs!!!!
Use any permanent marker pen to daw any lines, dots, crosses etc. when you have finished get a non-permanent marker and write over the old marks. Get a cloth and rub 'em off!!!!!
This also works on the charts (providing you have laminated charts!!!).
Use any permanent marker pen to daw any lines, dots, crosses etc. when you have finished get a non-permanent marker and write over the old marks. Get a cloth and rub 'em off!!!!!
This also works on the charts (providing you have laminated charts!!!).
Administrator
Joined: Mar 2001
Aviation Qualifications: PPL
Posts: 8,121
Likes: 686
From: Twickenham, home of rugby
Fonawah,
I use a medium, red, non-permanent marker, no problem. You only need one dot, after all! Lick your finger and rub it off when done.
If you use permanent marker, a good solvent is acetone (the active constituent of nail polish remover, but without the cr*p, or price). I get it in Boots or Superdrug. Never tried meths (except on Friday nights, but that's another story
)
Using a pencil eraser is supposed to make the surface opaque over time, I believe. Not proved this myself.
Cheers
SD
I use a medium, red, non-permanent marker, no problem. You only need one dot, after all! Lick your finger and rub it off when done.
If you use permanent marker, a good solvent is acetone (the active constituent of nail polish remover, but without the cr*p, or price). I get it in Boots or Superdrug. Never tried meths (except on Friday nights, but that's another story
)Using a pencil eraser is supposed to make the surface opaque over time, I believe. Not proved this myself.
Cheers
SD
Joined: Oct 2000
Posts: 41
Likes: 0
From: Shoreham West Sussex
The manufacturers recommend using a HB pencil. Alternatively you can purchase a CRP1 with a wind arm where you do not need to use a pencil at all. Ring Pooleys or check out their website or read the handbook which comes with the CRP1
Good luck!
Good luck!





