Aircraft lights
Thread Starter
Join Date: Jul 2007
Location: Bucks, England
Age: 56
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Aircraft lights
Can someone please explain why during take off and landing the flight crew have to switch off the internal lights on the aircraft?
Join Date: Feb 2007
Location: Amsterdam
Posts: 4,598
Likes: 0
Received 0 Likes
on
0 Posts
It's one of those measures that theoretically, under certain conditions, may or may not enhance safety. The idea behind it is that as a pax, your eyes are used to low light conditions, which may be beneficial in case of an emergency, when having to evacuate the aircraft in the dark.
Paxing All Over The World
The really amusing thing about this Diedtrying, is that ... the rules vary in various countries. This question is asked in here about once a year and the best answers tell you that in country A the internal lights must be dimmed for take off at night but if you land in country Z late on (also in darkness) then you have to keep the cabin lights on.
Doubtless, each country's Aviation Authority can justify it:
Doubtless, each country's Aviation Authority can justify it:
- With the lights dimmed, the pax will be adjusted to darkness if they have to make a rapid exit.
- With the lights on, the emergency services can put their ladders up and look in more easily to see what the situation is.
Can someone please explain why during take off and landing the flight crew have to switch off the internal lights on the aircraft?
Aside from the 'night blindness' issue covered by other replies, there is also the issue of reducing the power offtake load on the engines in case of a go-around.
If our steely-eyed aviator is on finals when (s)he gets a late go-around call, TOGA power and a rapid spool up is the order of the day. As the lights are powered by the electrical generators running off the engines, you want to reduce the power offtake load so you don't get reduced engine performance.
Same for take-off.
Aside from the 'night blindness' issue covered by other replies, there is also the issue of reducing the power offtake load on the engines in case of a go-around.
If our steely-eyed aviator is on finals when (s)he gets a late go-around call, TOGA power and a rapid spool up is the order of the day. As the lights are powered by the electrical generators running off the engines, you want to reduce the power offtake load so you don't get reduced engine performance.
Same for take-off.
Join Date: Jul 2003
Location: London
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
Not knowing too much about plank wing, is the APU running throughout the flight, (and therefore helping to feed the bus system) or is this only used when the aircraft is on the ground.
Join Date: Feb 2006
Location: Chicago
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
419,
Sorry, thought your were responding to my response, but now on second thought, maybe you weren't, so in normal ops the apu is only used on the ground to supply electrical power and air for cabin comfort and engine starting. Some a/c can use apu in the air if necessary, some can't.
Sorry, thought your were responding to my response, but now on second thought, maybe you weren't, so in normal ops the apu is only used on the ground to supply electrical power and air for cabin comfort and engine starting. Some a/c can use apu in the air if necessary, some can't.