Setting MLW in OzRunways
Thread Starter
Join Date: Dec 2006
Location: Under Class C
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Setting MLW in OzRunways
Hi all, just wondering if you can set MLW in OzRunways? I have been using AvPlan and you can set both MTOW and MLW per aircraft but I can’t see this in OZ. One,of the aircraft I fly has a reduced MLW.
Join Date: Aug 2000
Location: (Not always) In front of my computer
Posts: 371
Received 0 Likes
on
0 Posts
Or.... you could maybe go to the developer site?
https://docs.ozrunways.com/
https://docs.ozrunways.com/
Thread Starter
Join Date: Dec 2006
Location: Under Class C
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Gee thanks two_dogs. Not like that was the first thing i tried. 
given I couldn’t find anything obvious in the manual, and assuming surely there was a simple solution I was overlooking I posted on here. Thanks for dartman for posting what is in hindsight an obvious solution.
given I couldn’t find anything obvious in the manual, and assuming surely there was a simple solution I was overlooking I posted on here. Thanks for dartman for posting what is in hindsight an obvious solution.
Join Date: Aug 2000
Location: (Not always) In front of my computer
Posts: 371
Received 0 Likes
on
0 Posts
Thread Starter
Join Date: Dec 2006
Location: Under Class C
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
And what on there shows how to set a maximum landing weight as opposed to ramp weight restriction? You can see on the attached from AvPlan how both are displayed.
