OzRunways planning
Thread Starter
Join Date: Feb 2013
Location: Australia
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
OzRunways planning
Hello,
If I am planning YPMQ to BBG (Brooklyn Bridge) then on to YSBK and the plan sheet (in OzRunways) looks like this:
YPMQ ALT TAS etc
BBG A065
YSBK A025
Does this mean that it plans for me to fly to BBG at 6 500 and then descend while still en route to BBG as to arrive at BBG at 2500?
This is confusing and OzRunways never mentions any altitude planning.
Thanks
If I am planning YPMQ to BBG (Brooklyn Bridge) then on to YSBK and the plan sheet (in OzRunways) looks like this:
YPMQ ALT TAS etc
BBG A065
YSBK A025
Does this mean that it plans for me to fly to BBG at 6 500 and then descend while still en route to BBG as to arrive at BBG at 2500?
This is confusing and OzRunways never mentions any altitude planning.
Thanks
Last edited by JSeward; 15th Aug 2013 at 11:43.
Correct that's why the first waypoint doesn't have any entries next to it.
The A065 is *to* that waypoint.
Best to direct these things to help.ozrunways.com and/or watch these videos so we don't turn pprune into a help forum.
OzRunways Documentation / Getting Started / Knowledge Base - OzRunways Support
The A065 is *to* that waypoint.
Best to direct these things to help.ozrunways.com and/or watch these videos so we don't turn pprune into a help forum.
OzRunways Documentation / Getting Started / Knowledge Base - OzRunways Support
