Cessna 100 and 200 SIDS
Wouldn't Horsham be the place to get Cessna work done? Tony & Crew seem pretty switched on.
...or maybe somewhere a bit more relaxed, so there are fewer problems found?
...or maybe somewhere a bit more relaxed, so there are fewer problems found?
Join Date: Aug 2007
Location: Australia
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
This may be the crux of the problem here too A & C. A maintenance organization that is treading a thin line financially already may suddenly find itself without customers if it mandates that SIDs be carried out and the opposition on the other side of the field doesn't. Same goes for an operator. Spend possibly tens of thousands of dollars and ground your fleet to make them compliant while The opposition ignores it and steals all your work. There needs to be a black and white 'yay or nay' from the regulator on this.
Join Date: Jan 1999
Location: north of barlu
Posts: 6,207
Likes: 0
Received 0 Likes
on
0 Posts
One of the reasons that I decided to bite the SID's bullet was reliability, the aircraft are about half life according to Cessna and the aircraft is the only game in town when it comes to the training mission. In Eurore there are a few STC's to put Rotax engines in the C150 and it is only a matter of time before the C152 gets an STC for the 115 HP Rotax.
I want to be in the position that I have an airframe that is worth putting the Rotax into as I would love to be rid of the Lycoming due to the declining quality of the parts avalable from Lycoming.
I want to be in the position that I have an airframe that is worth putting the Rotax into as I would love to be rid of the Lycoming due to the declining quality of the parts avalable from Lycoming.
Join Date: Apr 2006
Location: melbourne
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Tony at Horsham does great work.
You will end up with a new aeroplane and it WILL cost you.
Don't get me wrong I'm all for quality, but it also needs to be affordable for the owner.
You will end up with a new aeroplane and it WILL cost you.
Don't get me wrong I'm all for quality, but it also needs to be affordable for the owner.
Join Date: Jun 2013
Location: Coquille, OR
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
C150 horizontal stabilizer spar break
This has been needed for some time now. I personally was flying a C150 15 years ago when I broke a horizontal stabilizer spar doing a spin demonstration for a student. Was able to go to neutral Gs and get it back level and slowed down to 65 where the vibration and flapping of the stabilizer stopped at which point I flew back to the airport and landed without changing the speed.
Dis-assembly showed corrosion and an old crack about 2/3 through the spar all of which was not visible through the inspection port.
I don't know if anyone else has had this kind of experience and lived to tell about it, but it isn't a pleasant afternoon.
Dis-assembly showed corrosion and an old crack about 2/3 through the spar all of which was not visible through the inspection port.
I don't know if anyone else has had this kind of experience and lived to tell about it, but it isn't a pleasant afternoon.
How are all the Cessna 100/200 series operators going out there with SID's compliance? Just over 6 months to go on 200 series and a year on the 100s! Gonna be a few cheap Cessnas coming up I fear
So if I've got it right there's no reason to have the SIDS on the 210 completed by the 31st of December at the end of this year as they don't qualify as being mandatory. This suits me fine as the aircraft will probably be reprinted within the next two to three years and it would be more convenient and cost effective to have any inspection regime carried out in conjunction with the paint job.
Join Date: Apr 2006
Location: melbourne
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Gassed Budgie.
If something happens to your aircraft prior to doing the SIDs after the due date. All I can say to you is good luck in court !!
The SIDs are now part of the manufacturers maint manual.
At the moment it depends on what system of maint your on, and what your log book statement says.
Note that it says at the top of D2004-5-13 TR 11 page 1 2A-10-00 SIDs, under scope. 'This provides the MANDATORY times and inspection intervals for components and airplane structures'
With regards to CASA, I have no doubt they will mandate the SIDs just as they did with the 300/400 series cessna's. To add to that I have heard rumors from a solid source that the CASA sched 5 may well be removed as an option, and for us that means back to the manufacturers or other individually approved maintenance manuals.
I would assume CASA will give owners/operators a reasonable time frame for the changeover.
Whilst my aeroplane had been shipped from the states with wings and tail removed i decided to take the opportunity to do the SIDs. That way it was done and I knew I could have peace of mind with the airframe.
Also I remember the delays we had getting spares when all of a sudden everyone was doing the SIDs on the 300/400 series and finding similar problems.
If you are an operator of course that means time and loss of revenue.
If something happens to your aircraft prior to doing the SIDs after the due date. All I can say to you is good luck in court !!
The SIDs are now part of the manufacturers maint manual.
At the moment it depends on what system of maint your on, and what your log book statement says.
Note that it says at the top of D2004-5-13 TR 11 page 1 2A-10-00 SIDs, under scope. 'This provides the MANDATORY times and inspection intervals for components and airplane structures'
With regards to CASA, I have no doubt they will mandate the SIDs just as they did with the 300/400 series cessna's. To add to that I have heard rumors from a solid source that the CASA sched 5 may well be removed as an option, and for us that means back to the manufacturers or other individually approved maintenance manuals.
I would assume CASA will give owners/operators a reasonable time frame for the changeover.
Whilst my aeroplane had been shipped from the states with wings and tail removed i decided to take the opportunity to do the SIDs. That way it was done and I knew I could have peace of mind with the airframe.
Also I remember the delays we had getting spares when all of a sudden everyone was doing the SIDs on the 300/400 series and finding similar problems.
If you are an operator of course that means time and loss of revenue.
Last edited by rnuts; 25th Jun 2013 at 00:39.
As was mentioned the Reims built aircraft are a far better bet. Every year I end up dealing with external corrosion , I have yet to find anything internally. We are doing the SID at the moment and apart from the NDT it is really not a lot more than a first class annual inspection. I suspect that what people pay will be down to the honesty of the maintenance provider and I reckon some will pay a little and some will be royally screwed.
Join Date: Aug 2007
Location: Australia
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
A recently issued CASA AWB recommending control cable retirement at 15 yrs may be where your friend got that from. I believe the SID only calls up removal and thorough inspection of control cables.
Also I think most LAMES wouldn't have an issue with signing out re-start Cessnas as the factory corrosion protection in the form of pre-priming everything before assembly will mean that the kind of corrosion issues seen in the older models will probably never eventuate.
Also I think most LAMES wouldn't have an issue with signing out re-start Cessnas as the factory corrosion protection in the form of pre-priming everything before assembly will mean that the kind of corrosion issues seen in the older models will probably never eventuate.
Join Date: Nov 2007
Location: Mars
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
Try the C182T manual, July 2012 amendment. Kicks in at 5 years. Absolutely ridiculous... But does not have to be a big deal if done sensibly and just means new aircraft will have been under a more rigorous maintenance regime than the 30-40 year olds flying around. Although clearly there are some pretty good 'business opportunities' for the more zealous LAMES who see a need to pull out engines, pull off wings, rip out interiors etc so that these inspections can be done properly on 500 hour, 5 year old fully corrosion protected airplanes.
Just one extreme to the other...
Just one extreme to the other...
Last edited by Clearedtoreenter; 27th Jun 2013 at 22:42.
Join Date: May 2005
Location: WA
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
I think you will find that ultimately the C of R holder is responsible for what work is carried out, he should be knowledgeable of the SIDs program and have some input in what is carried out, if you just leave your aircraft with your possibly unscrupulous Maint provider then well you possibly should not be complaining.
Join Date: Mar 2007
Location: All over
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Bugger...
On a recent visit to me home town 3 200 series operators have been dramatically affected by/with SID's compliance...their airframes ranged from tidy/well maintained through to the other end of the spectrum...
As an example one of them was quoted/assured around the 40 man/hr mark for the inspection which escalated to over 500 hrs, another considering selling his tidy aircraft now effectively has to give it away prior to SID's being carried out...and the third put the inspection on hold mid-way after the third un-expected 5K bill to source other aircraft types...
I appreciate the importance of safety however feel this is not the only motivation from cessna and is being incorporated in a bullish manner by the regulators...
On a recent visit to me home town 3 200 series operators have been dramatically affected by/with SID's compliance...their airframes ranged from tidy/well maintained through to the other end of the spectrum...
As an example one of them was quoted/assured around the 40 man/hr mark for the inspection which escalated to over 500 hrs, another considering selling his tidy aircraft now effectively has to give it away prior to SID's being carried out...and the third put the inspection on hold mid-way after the third un-expected 5K bill to source other aircraft types...
I appreciate the importance of safety however feel this is not the only motivation from cessna and is being incorporated in a bullish manner by the regulators...
I am thinking about half the Cessna 100 and 200 fleet will be permanently grounded. I am also thinking there are not enough LAME's in the country to get the ones that are to be completed done in a timely manner.
Join Date: May 2013
Location: have I forgotten or am I lost?
Age: 71
Posts: 1,126
Likes: 0
Received 0 Likes
on
0 Posts
I am told that the Cessna SIDS in australia only applies to commercially operated aircraft. (category A aircraft)
privately owned and privately operated aircraft are still schedule 5 maint and unaffected.
privately owned and privately operated aircraft are still schedule 5 maint and unaffected.
Join Date: Aug 2007
Location: Australia
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Regardless of whether the aircraft is commercially operated or not (class b - charter, air work, private) most log book statements say that the aircraft is to be maintained iaw "all special inspections and lifed components listed in the aircraft maintenance manuals table of limitations". By very definition the Cessna SIDS program is applicable as it is now part of the maintenance manual latest revision
Join Date: Nov 2012
Location: The Last Resort
Age: 52
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Well Worth Doing
Just finished the SIDS on a 206 and now into the second 206 and anyone who owns or operates a Cessna would be wise to get it done regardless. Found quite a few things that are well targeted in the inspections that wouldn't normally get done. Non compliant aircraft will quickly lose resale value. Whose arse is in your plane?
Join Date: Jun 2005
Location: Australia
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Cessna SIDS
Hi Guys,
We have completed a few SIDs and I have to say , they are well worth the effort and cost.
Cessna consider compliance mandatory for all aircraft regardless of type of operation, and it seems the soon to be released CASA policy on SIDs will state the same.
It is now part of the Service Manual for the aircraft - not a separate (optional) document. It forms part of the manufacturers Instructions for Continued Airworthiness.
Hard to believe that in some red neck regions MROs are telling people that it's optional. 200's by 30 Dec 13 and 100's by end of June 14.
CASA MAY give an exemption in time to allow people to catch up. It is true that a Cessna without SIDs is worth a heap less.
Remember when we used to have Major Inspections.....? SIDs for your Cessna is a bit of catch up since it was last looked at 'properly' ie when Major Inspections were cancelled.
For those Mooney/Beech/Piper people out there, CASA may (it seems) also introduce an ageing aircraft inspection program soon to cover these aircraft. Seems we are operating these aircraft way beyond their intended life span.
SC
We have completed a few SIDs and I have to say , they are well worth the effort and cost.
Cessna consider compliance mandatory for all aircraft regardless of type of operation, and it seems the soon to be released CASA policy on SIDs will state the same.
It is now part of the Service Manual for the aircraft - not a separate (optional) document. It forms part of the manufacturers Instructions for Continued Airworthiness.
Hard to believe that in some red neck regions MROs are telling people that it's optional. 200's by 30 Dec 13 and 100's by end of June 14.
CASA MAY give an exemption in time to allow people to catch up. It is true that a Cessna without SIDs is worth a heap less.
Remember when we used to have Major Inspections.....? SIDs for your Cessna is a bit of catch up since it was last looked at 'properly' ie when Major Inspections were cancelled.
For those Mooney/Beech/Piper people out there, CASA may (it seems) also introduce an ageing aircraft inspection program soon to cover these aircraft. Seems we are operating these aircraft way beyond their intended life span.
SC
Join Date: Sep 2007
Location: Atherton Tablelands..
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
200's by 30 Dec 13 and 100's by end of June 14.
Where are people getting these dates from? I've heard lots of different storys, There is no CASA AD specifying this, nor is it mentioned anywhere I can find?
SID's is a supplemental Inspection program, to supplement the Cessna maintenance system, not sched 5. I'm hearing lots of 'it has to be done' by dates/storys, but nobody I've talked to can actually show me where its stated. I've checked the AD's & Maintenance Manuals...