Bankstown two departure
Thread Starter
Join Date: Nov 2008
Location: sydney
Age: 39
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Bankstown two departure
hi Guys,
i was taking an IFR flight from bankstown airport and was cleared for bankstown two departure, last ammendment for japessen rev 23 effective from 20 november has nothing to say about bankstown two departure. some one said me its is published by AIP. what is two departure.
i was taking an IFR flight from bankstown airport and was cleared for bankstown two departure, last ammendment for japessen rev 23 effective from 20 november has nothing to say about bankstown two departure. some one said me its is published by AIP. what is two departure.
Join Date: Jun 2004
Location: Brisbane, Australia
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Could someone please elaborate on why it's now "TWO"? I was discussing this with a regular BK user the other day. He is extremely well organised, uses Jepps and is aware of the change but not the reason. The amendment section of the chart simply says "Proc Name"..... Well, that's useful..... If there was something in Jepp's Chart Notams well we've missed it.
Anyone?
Anyone?
Join Date: Sep 2000
Location: Adelaide, South Australia
Posts: 394
Likes: 0
Received 0 Likes
on
0 Posts
The reason for the change is ATC now have an obligatory 15 minute wait in the run-up bay for clearance - even if there is no trafiic conflict.
It used to be 10 minutes holding.
It used to be 10 minutes holding.
Join Date: Sep 2004
Location: inner suburbia
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
Ron & Edna Johns
As far as i can see, the only change is that the SID is only available from 11C/29C.
I saw a NOTAM about this about 2 months ago. (in amongst what seemed like pages of notams regarding fireworks displays)
As far as i can see, the only change is that the SID is only available from 11C/29C.
I saw a NOTAM about this about 2 months ago. (in amongst what seemed like pages of notams regarding fireworks displays)
Last edited by Biggles_in_Oz; 23rd Nov 2008 at 00:53.
Join Date: Jun 2004
Location: Brisbane, Australia
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, Biggles, yeah I was aware of that Notam and change.... maybe that is the reason (and I wondered this also) but you'd think the change annotation would be something other than simply "Proc Name", wouldn't you! Thanks mate, for your ideas.