B1B tests Sniper Pod
Ecce Homo! Loquitur...
Thread Starter
B1B tests Sniper Pod
2/28/2007 - EDWARDS AIR FORCE BASE, Calif. (AFNEWS) -- Members of the 419th Flight Test Squadron here recently completed its initial developmental testing of the Sniper pod installed on a B-1B Lancer, designed to increase the aircraft's self-targeting capability. The Sniper pod, manufactured by Lockheed Martin, is an advanced targeting pod with multi-sensor capability and allows the operator to positively identify targets........
The pod was attached to the left hand chin of the aircraft using existing mounting points during testing, Major Joffrion said. The external attach points were initially designed to allow the B-1B to carry cruise missiles externally. These hard points were modified to attach the targeting pod through a pylon assembly.
To communicate with the Sniper pod, power and control connections must be supplied from the aircraft to the pod. The current design uses the conduit from the hard points to route the required wiring to the pod from the aircraft. Inside the aircraft, aircrew control the pod using a hand controller and notebook computer, Major Lane said. The pod provides a video feed to the computer, while the hand controller connects to the pod through an on-board Ethernet.
Members of the 419th FLTS performed the third and final test of the Sniper pod with GBU-31 and GBU-38 Joint Direct Attack Munition drops.
"The significance of this test was to complete the demonstration of target identification and to provide post-strike bomb damage assessment," Major Lane said. "This capability is important for combat operations to provide near real-time feedback strike assessment for theater commanders. During this sortie, two initial looks of weapon separation characteristics were also tested using the guided bomb units.".........
"The testing was an integrated demonstration designed to provide a proof of concept pod for the B-1," Major Lane said. "The initial demonstration was very successful and shows promise for full integration onto the B-1 bomber."
The pod was attached to the left hand chin of the aircraft using existing mounting points during testing, Major Joffrion said. The external attach points were initially designed to allow the B-1B to carry cruise missiles externally. These hard points were modified to attach the targeting pod through a pylon assembly.
To communicate with the Sniper pod, power and control connections must be supplied from the aircraft to the pod. The current design uses the conduit from the hard points to route the required wiring to the pod from the aircraft. Inside the aircraft, aircrew control the pod using a hand controller and notebook computer, Major Lane said. The pod provides a video feed to the computer, while the hand controller connects to the pod through an on-board Ethernet.
Members of the 419th FLTS performed the third and final test of the Sniper pod with GBU-31 and GBU-38 Joint Direct Attack Munition drops.
"The significance of this test was to complete the demonstration of target identification and to provide post-strike bomb damage assessment," Major Lane said. "This capability is important for combat operations to provide near real-time feedback strike assessment for theater commanders. During this sortie, two initial looks of weapon separation characteristics were also tested using the guided bomb units.".........
"The testing was an integrated demonstration designed to provide a proof of concept pod for the B-1," Major Lane said. "The initial demonstration was very successful and shows promise for full integration onto the B-1 bomber."
