Prespin Question
Thread Starter
Join Date: Jan 2007
Location: Milton Keynes
Age: 62
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Prespin Question
I know there are several patents active for introducing prespin to landing gear prior to touchdown to save tyre wear and damage which is especially prevalent on larger aircraft.
Is anyone aware of any aircraft, commercial or military that has adopted any of these patents, and if so what impact has it had (forgive the pun) ?
Is anyone aware of any aircraft, commercial or military that has adopted any of these patents, and if so what impact has it had (forgive the pun) ?
Join Date: Oct 2004
Location: [loh-key-shuhn] 1. a place of settlement, activity, or residence 2. a place or situation occupied
Age: 52
Posts: 238
Received 0 Likes
on
0 Posts
I used to find that a quick, light bounce or two before the final arrival achieved this quite satisfactorily. This technique has the merit of being applicable to a large variety of aircraft types without expensive mods.
Is the additional effort, cost and most of all weight involved really worthy of saving a little tyre tread?
This may explain why they are not commonplace but I am happy to be convinced otherwise.
This may explain why they are not commonplace but I am happy to be convinced otherwise.
ratty1
Thanks for clearing that up.
Correct me if I'm wrong MostlyHarmless but your post did have a slght hint of sarcasm about it...am I right? Or are you landings simply crap?!
TF
Thanks for clearing that up.
Correct me if I'm wrong MostlyHarmless but your post did have a slght hint of sarcasm about it...am I right? Or are you landings simply crap?!
TF
Join Date: May 2006
Location: 2 m South of Radstock VRP
Posts: 2,042
Likes: 0
Received 0 Likes
on
0 Posts
There I was, wondering why this was on the Mil Forum and not the Eng and Tech Forum when, lo and behold, it has opened up a whole rich vein of humour.
We should really ask the Cabinet Office this question. After all, spinning is their speciality.
We should really ask the Cabinet Office this question. After all, spinning is their speciality.
Join Date: Jan 2007
Location: Mostly in my own imagination
Posts: 477
Received 314 Likes
on
146 Posts
I'm going to patent my idea...
...spin them backwards and if you can get them going fast enough, you won't need any of that horribly noisy reverse thrust
...spin them backwards and if you can get them going fast enough, you won't need any of that horribly noisy reverse thrust
Join Date: Oct 2004
Location: [loh-key-shuhn] 1. a place of settlement, activity, or residence 2. a place or situation occupied
Age: 52
Posts: 238
Received 0 Likes
on
0 Posts
And yes, that was sarcasm / humour; but I find it hard to differentiate myself sometimes...
Join Date: Nov 2006
Location: Huntingdon
Age: 46
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
ratty1
Try highlighting all of the post by MostlyHarmless and you'll see the following...
You see. I told you, crap landings.
And yes, that was sarcasm / humour; but I find it hard to differentiate myself sometimes...
Join Date: Feb 2004
Location: Hants
Age: 80
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
On the old large aircraft (eg Hastings) they used to put scoop dimples in the tread which had a limited success in running the wheels up before landing. Bit of a bu$$er if the fitter put them on the wrong way round though.
ACW
ACW
Join Date: Aug 2006
Location: Aberdeen
Age: 48
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
On no, totally serious. In fact, one trip I dispensed with that troublesome landing bit entirely, saving countless millimeters of tyre wear. Seem to recall they had a bit of an issue locating the tyres afterwards, though.
And yes, that was sarcasm / humour; but I find it hard to differentiate myself sometimes...
And yes, that was sarcasm / humour; but I find it hard to differentiate myself sometimes...