Go Back  PPRuNe Forums > Aircrew Forums > Freight Dogs
Reload this Page >

General info

Wikiposts
Search

Notices
Freight Dogs Finally a forum for those midnight prowler types who utilise the unglamorous parts of airports that many of us never get to see. Freight Dogs is for pilots and crew who operate mostly without SLF.

General info

Thread Tools
 
Search this Thread
 
Old 19th April 2004 | 15:04
  #1 (permalink)  
Thread Starter
 
Joined: Apr 2004
Posts: 4
Likes: 0
From: australia/England
General info

Hi

I am a newbie here so please apologise for the questions. I am looking into getting my JAA CPL, and so I am trying to get a feel of what work is out there, I am getting the feel that work is rather thin. Can anyone give me any advice over how I can get up my time, after getting my Lic. I see alot of people get in to instructing first and then move on from there. Is there any work in the freight industry for a new pilot? if so what companies should I be chasing after.

Any help you could give me would be really useful.

Thanks to anyone that can help.

Adie
Adie101 is offline  
Old 19th April 2004 | 18:48
  #2 (permalink)  
 
Joined: Mar 2000
Posts: 303
Likes: 0
From: Walmington on Sea
Adie

Best suggestion is do a thorough search in the Wannabe forums, have a good read, and if you have any specific questions that haven't been asked, post in those forums. Pretty much everything has been covered at some point on Pprune, and you will be amazed at the amount of info in there. As far as getting a job is concerned, it depends on a whole range of factors from age and experience to which country you want to work in.

Sorry for the brief answer, but wanted to point you in the right direction before you posted in those forums.

Best of luck
ExO
Ex Oggie is offline  
Old 19th April 2004 | 21:05
  #3 (permalink)  
 
Joined: Jun 2001
Posts: 2,627
Likes: 2
From: UTC +8
In the USA the usual minimum experience requirements to fly PIC in the single engine turboprop C208 (Caravan) are 1200 fixed-wing flying hours and a CPL with an Instrument rating.
GlueBall is offline  
Old 23rd April 2004 | 15:37
  #4 (permalink)  
coopervane's Avatar
Oops pardon me
 
Joined: Apr 2002
Posts: 369
Likes: 0
From: Manchester England
My advice is go and do it first and worry about getting a job later.

When you have the required licence, then get streetwise as to working your way into a job. The best way to do this is from the inside. Its no good looking in the back of "Flight" every week in the hope that the dream job will fall into your lap.

A good way is to try and get a job in "ops" or some other admin position with a small to medium size carrier. There are many stewards, ops and ramp guys out there flying as pilots who were at the right place at the right time.

Its no good listening to the media gloom or what yer mates are saying. Its an ever changing scene and there are jobs out there that are never advertised.

Go down the cold calling route as well. Lots of companies may be quietly recruiting and you may drop lucky again.

Freight is a good place to start and if you don't mind working at night,it can be tons better than the charter game.

A flying instructor job may not make you a millionaire but will fund your hour building and give you some good experience. Airlines do take instructors but again, its being at the right club at the right time.

Money is always an issue. You need to work while you are learning so what better than to get a job in aviation on the ground.

I hope this is of use as I have found in the past it is the way to go. Never give up and never think the industry is full of people better than you. Go for it!!!

Coop & Bear
coopervane is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.