Cleaning Fabric Covered Aircraft
Thread Starter
Cleaning Fabric Covered Aircraft
I know plenty of you out there have real aircraft, so my question is quite simply:
What is the best way to clean and polish fabric covered aircraft?
What is the best way to clean and polish fabric covered aircraft?
Guest
Posts: n/a
For everyday dirt: mild soap (not detergent) and lots of water. Fly the aeroplane after washing to dry out the inevitable ingress of water into the airframe, then polish if needs be.
For oil, stains etc, a mild solvent such as "panel wipe" available from car resprayers etc.
For polishing use a non-silicone wax, carnuba (sp?) wax for example.
For transparencies, use lemon pledge.
Hope this helps.
For oil, stains etc, a mild solvent such as "panel wipe" available from car resprayers etc.
For polishing use a non-silicone wax, carnuba (sp?) wax for example.
For transparencies, use lemon pledge.
Hope this helps.
As a general tip, always use clean soft cloth to polish the windows and light covers. Paper towels can scratch perspex!
I've always used Sparkle on the perspex but have recently bought a can of Plexus which is expensive but very good. I usually use Pledge or similar on the leading edges and prop blades to get the bugs off.
I've always used Sparkle on the perspex but have recently bought a can of Plexus which is expensive but very good. I usually use Pledge or similar on the leading edges and prop blades to get the bugs off.
Join Date: Feb 2003
Location: Oxford
Posts: 2,042
Likes: 0
Received 0 Likes
on
0 Posts
always use clean soft cloth to polish the windows and light covers
Tim
Join Date: Aug 2000
Location: Norfolk
Posts: 1,966
Likes: 0
Received 0 Likes
on
0 Posts
I avoid putting water and soap near mine and use Mr Muscle window cleaner to get rid of all the wee bugs and then it gets polished with Autoglym.
Under the belly I remove all the oil/smoke/exhaust detritus with Avgas - then a quick rub with a Mr M impregnated cloth. For cloth I tend to use old t-shirt/sweat shirts.
I use Plexus, too, and really do think that it is a great product.
Under the belly I remove all the oil/smoke/exhaust detritus with Avgas - then a quick rub with a Mr M impregnated cloth. For cloth I tend to use old t-shirt/sweat shirts.
I use Plexus, too, and really do think that it is a great product.
Join Date: Jun 2004
Location: Bedfordshire
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
stiknruda
Mr Muscle.... AutoGlym, would this be appropriate for matt finish paint job? I guess a lick of polish would prevent flies from sticking.... or at least make them easier to wsh off. However, would that make a WW2 matt paint job look glossy?
Just Curious.....
BK
Mr Muscle.... AutoGlym, would this be appropriate for matt finish paint job? I guess a lick of polish would prevent flies from sticking.... or at least make them easier to wsh off. However, would that make a WW2 matt paint job look glossy?
Just Curious.....
BK
Join Date: Aug 2000
Location: Norfolk
Posts: 1,966
Likes: 0
Received 0 Likes
on
0 Posts
My fabric aircraft is two pack epoxy painted and is very shiny! 
Mr Muscle on the fabric - yes. I don't drench it, just scoosh it on and wipe away the bugs.
Would Autoglym detract from the matt drab of military colour schemes, I don't know but I'd do a sample and see.
Stik
Mr Muscle on the fabric - yes. I don't drench it, just scoosh it on and wipe away the bugs.
Would Autoglym detract from the matt drab of military colour schemes, I don't know but I'd do a sample and see.
Stik
Autoglym would probably put some shine on your matt paint. It put a shine on the bits of my Auster where the paint had gone matt. Memo to self, don't forget to clean the aeroplane ALL over this year!
Never, ever clean the oil and goop off the underside of your aeroplane using Gunk. I cleaned my old Cub with it once and the stink hung around the hangar for weeks.
If you use a pressure washer don't get too close or you might find a lot of instant unpainted patches
. Also be VERY careful about which direction you spray in. Try to spray from the direction of flight as the gubbins that face into the breeze are designed for it. Squirt high pressure water the wrong way and you can suddenly find water in amongst your electrics and interior which is not generally considered to be a good thing! Don't forget to reapply oil / grease to all the bits where you've washed it off!
Never, ever clean the oil and goop off the underside of your aeroplane using Gunk. I cleaned my old Cub with it once and the stink hung around the hangar for weeks.
If you use a pressure washer don't get too close or you might find a lot of instant unpainted patches
. Also be VERY careful about which direction you spray in. Try to spray from the direction of flight as the gubbins that face into the breeze are designed for it. Squirt high pressure water the wrong way and you can suddenly find water in amongst your electrics and interior which is not generally considered to be a good thing! Don't forget to reapply oil / grease to all the bits where you've washed it off!
Join Date: Jun 2004
Location: Dubai
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Just cleaned Cub this weekend (or rather wife claims to have done most of it).
I used a proprietary detergent based motorcycle cleaner to remove oil and crud from engine areas and underneath. Also good for bug removal.
I then washed it with a good automotive shampoo and plenty of water. (not washing up liquid as this apparently contains heaps of salt)
Leathered dry and applied Mer automotive wax / polish as recomended by a pal in the car restoration business. Boy does it shine.
Transparencies were done with Mr M to remove the worst of the crud and finished with Lemon Pledge.
I'm now hoping for another 10 knots on the cruise
Go on. Somebody tell me I've knackered the fabric with these potions
I used a proprietary detergent based motorcycle cleaner to remove oil and crud from engine areas and underneath. Also good for bug removal.
I then washed it with a good automotive shampoo and plenty of water. (not washing up liquid as this apparently contains heaps of salt)
Leathered dry and applied Mer automotive wax / polish as recomended by a pal in the car restoration business. Boy does it shine.
Transparencies were done with Mr M to remove the worst of the crud and finished with Lemon Pledge.
I'm now hoping for another 10 knots on the cruise
Go on. Somebody tell me I've knackered the fabric with these potions
Thread Starter
SRD
Either you've not done any damage or people are too afraid to tell you just how much damage you've done.
Thanks all for your ideas and suggestions.
Either you've not done any damage or people are too afraid to tell you just how much damage you've done.
Thanks all for your ideas and suggestions.
Join Date: Apr 2000
Location: 30 West
Age: 65
Posts: 926
Likes: 0
Received 0 Likes
on
0 Posts
WD40 can prevent the bugs from sticking on leading edges. Light spray onto a cloth, wipe on, wipe off.
For a laugh, have a look at this website called 2000 uses for WD40 - The product celebrated some anniversary this summer and there was this bloke on talking about what it had been used for. The most bizarre was down in deepest, darkest Africa, they sprayed it on their arthritic joints and swore it cured them. When the doctor checked the people over he did find that the symptoms were reduced - Weird !
http://www.twbc.org/wd40.htm
For a laugh, have a look at this website called 2000 uses for WD40 - The product celebrated some anniversary this summer and there was this bloke on talking about what it had been used for. The most bizarre was down in deepest, darkest Africa, they sprayed it on their arthritic joints and swore it cured them. When the doctor checked the people over he did find that the symptoms were reduced - Weird !
http://www.twbc.org/wd40.htm
