RT Training Simulator
Thread Starter
Joined: Feb 2002
Posts: 177
Likes: 0
From: Somewhere in Southern England
RT Training Simulator
The simulator which we use for RT Training is starting to shown the signs of old age and is in need of replacement. So far I have singularly failed to find the source of a replacement box.
Does anyone at any of the other flying schools that conduct training for the RT practical examination know of a source?
Does anyone at any of the other flying schools that conduct training for the RT practical examination know of a source?
Joined: May 1999
Posts: 424
Likes: 0
From: UK
I looked at becoming an RT examiner a few months ago...the CAA sent me a load of splurge - and also a flyer for some equipment. I cant remember the precise peeps who I spoke to but if you ring the CAA reception and get the bit of PLD dealing with RT exmainers they should be able to point you at some respectable equipment that they are recommending their examiners....
I would dig the info - but its buried deep in a 1.5' pile of paperwork!!!
Hope this helps,
Barry
I would dig the info - but its buried deep in a 1.5' pile of paperwork!!!
Hope this helps,
Barry
Joined: Oct 2000
Posts: 284
Likes: 0
From: UK
Thread Starter
Joined: Feb 2002
Posts: 177
Likes: 0
From: Somewhere in Southern England
Thanks for the information. I had already tried Formationflyer's suggestion before starting this thread and the response pointed me in exactly the direction suggested by Noggin. Tried e-mailing the company but they fail to respond.
Hence my request for information/guidance. Keep the suggestions coming!
Hence my request for information/guidance. Keep the suggestions coming!
Joined: Mar 2001
Posts: 632
Likes: 0
From: Florida, USA
The man who will, know the answer is the head of R/T training and testing at the Ministry of Aeroplanes.
[email protected]
[email protected]
Thread Starter
Joined: Feb 2002
Posts: 177
Likes: 0
From: Somewhere in Southern England
Gone West Thanks but I have already contacted Mike and followed up on his answer which took me down the path suggested by Noggin. I was hoping that someone may have further suggestions otherwise I will need to try hitting my present simulator with an even bigger hammer!




