FIC in OZ (GRADE 3 requirement)
Thread Starter
Join Date: May 2007
Location: Asia
Age: 37
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
FIC in OZ (GRADE 3 requirement)
I was just wondering that what`s requirements for Oz grade 3 instructor.
In NZ its 150 PIC and 25 hrs dual (so normally FIC course consist 50hrs solo and 25hrs dual) and cost about $15000-17000 NZ
But i was looking at Oz FIC course and it says 30 hrs dual with Grade 1 and 20 hrs with grade 2.. so what's the PIC time requirements for Grade 3 test.. and in NZ B-cat needs (400 PIC and 250 instructing time) whats grade2 Oz require?
PS; is there any place u would recommend to do FIC course?(which likely offer u job after the FIC) I understand it's hard to climb from grade 3 to 2 whether in NZ or Oz(my instructor didnt get paid when he was under 100hrs supervision)
In NZ its 150 PIC and 25 hrs dual (so normally FIC course consist 50hrs solo and 25hrs dual) and cost about $15000-17000 NZ
But i was looking at Oz FIC course and it says 30 hrs dual with Grade 1 and 20 hrs with grade 2.. so what's the PIC time requirements for Grade 3 test.. and in NZ B-cat needs (400 PIC and 250 instructing time) whats grade2 Oz require?
PS; is there any place u would recommend to do FIC course?(which likely offer u job after the FIC) I understand it's hard to climb from grade 3 to 2 whether in NZ or Oz(my instructor didnt get paid when he was under 100hrs supervision)
Unless its changed since I did mine a few years back (I am pretty confident it hasn't) you need to hold a CPL(A) before commencing the rating, and a NVFR before the test. Theoretically you could do your FIR with 150hrs and a brand new CPL(A). The 30hrs Dual and 20hrs mutual is the hours the course must consist of.
Grade 2 you need 250hrs instructional time, of which 200hrs must be ab initio and 50hrs nav.
Grade 1 is 750hrs, I don't recall what the split is for ab initio.
Hope that helps a bit.
Grade 2 you need 250hrs instructional time, of which 200hrs must be ab initio and 50hrs nav.
Grade 1 is 750hrs, I don't recall what the split is for ab initio.
Hope that helps a bit.
Thread Starter
Join Date: May 2007
Location: Asia
Age: 37
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
FTA
There is instrutor course at FTA... does it increase any chance of getting hired at FTA after that? their requirement is GRADE 2 but they stated that they consider grade 3 if they willing to receive the standarisation prog.