Slots?!
Thread Starter
Join Date: Apr 2004
Location: A
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Slots?!
In the following question, why is answer b not correct? (The correct answer given is d)
A stalling angle of attack is increased by slots because:
a) They increase the effective wing area at the trailing edge
b) They dump positive pressure airflow from under the wing
c) They increase the effective wing area at the leading edge
d) They delay the break up of smooth airflow over the wing
A stalling angle of attack is increased by slots because:
a) They increase the effective wing area at the trailing edge
b) They dump positive pressure airflow from under the wing
c) They increase the effective wing area at the leading edge
d) They delay the break up of smooth airflow over the wing
Why do it if it's not fun?
Join Date: Jul 2001
Location: Bournemouth
Posts: 4,779
Likes: 0
Received 0 Likes
on
0 Posts
Hmm, tricky one. I think it's all in the language.
Slots do "dump" "positive pressure airflow" from under the wing, by transfering that air on to the top of the wing.
To answer that "They dump positive pressure airflow from under the wing", and leave it there, suggests that positive pressure airflow under the wing causes the stall, and therefore "dumping" it will somehow delay the stall. This misses the point, which is that it is the lack of "positive pressure airflow" on the top of the wing which causes the stall. The reason slots work is because of the change to the airflow on the top of the wing.
Therefore, although b) is technically correct, I would say that it is missing a vital piece of information, and d) is more correct. But I think it's a pretty nasty set of answers to give to choose between.
FFF
-------------
Slots do "dump" "positive pressure airflow" from under the wing, by transfering that air on to the top of the wing.
To answer that "They dump positive pressure airflow from under the wing", and leave it there, suggests that positive pressure airflow under the wing causes the stall, and therefore "dumping" it will somehow delay the stall. This misses the point, which is that it is the lack of "positive pressure airflow" on the top of the wing which causes the stall. The reason slots work is because of the change to the airflow on the top of the wing.
Therefore, although b) is technically correct, I would say that it is missing a vital piece of information, and d) is more correct. But I think it's a pretty nasty set of answers to give to choose between.
FFF
-------------
Join Date: May 2005
Location: Norwich
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Answer 'b' does not answer the question.
Have a look at this good explanation if you need to.
http://en.wikipedia.org/wiki/Slot
Have a look at this good explanation if you need to.
http://en.wikipedia.org/wiki/Slot
