OEI Takoff procedure design
Thread Starter
Joined: Jun 2011
Posts: 2
Likes: 0
From: GCC
OEI Takoff procedure design
This is my first post in the forum and hope that all of you will share your knowledge.
I'm searching for a reference that provides me a full training material in designing one engine out takoff design. Can anybody help me.?
I'm searching for a reference that provides me a full training material in designing one engine out takoff design. Can anybody help me.?
Joined: Jun 2010
Posts: 11
Likes: 0
From: Indiana USA
A full training material, I dont know of one. There are some decent books have it as a topic. I would definitely try and get a hold of Boeings Jet Transport Performance Methods as it has a very good section on obstacle clearance max weights.
If you fly Boeing equipment, you should be able to get a copy from your carrier's Airline Support Engineer.
I have the Airbus Getting to Grips with Aircraft Performance, and it doesnt have nearly the info vs the Boeing JTPM.
If you fly Boeing equipment, you should be able to get a copy from your carrier's Airline Support Engineer.
I have the Airbus Getting to Grips with Aircraft Performance, and it doesnt have nearly the info vs the Boeing JTPM.
Fleet Manager
Joined: Apr 2001
Aviation Qualifications: ATPL
Posts: 7,448
Likes: 310
From: various places .....
Easiest solution is to get a flight manual and work through some examples.
There is nothing terribly difficult other than getting accurate obstacle data for the area of interest once past the regions published by the aerodrome operator.
You might also like to run some searches on Tech Log as there are numerous threads discussing the ins and outs of escape design.
There is nothing terribly difficult other than getting accurate obstacle data for the area of interest once past the regions published by the aerodrome operator.
You might also like to run some searches on Tech Log as there are numerous threads discussing the ins and outs of escape design.
