Compensator in Fuel tank
Thread Starter
Join Date: Apr 2019
Location: Your heart
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Compensator in Fuel tank
Compensator is used in fuel tank to measure the dielectric constant for fuel ( as temperature changes the density of fuel changes )
But how the compensator actually measure the fuel density
Thank you
But how the compensator actually measure the fuel density
Thank you
Join Date: Jul 1999
Location: Big Sky Country
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
The densiometer normally uses ultrasound to measure the fuel density. the signal output is AC with the frequency changing inline with the density. Older capacitance systems will have a compensating probe which has an extra capacitance plate whose purpose is to measure the changing dielectric constant of the fuel..
Join Date: Feb 2002
Location: The Sandpit
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
The compensator and the densitometer are not the same thing. The compensator, which sits at the bottom of the tank and is always covered with fuel, is effectively an analogue device which injects a signal (in opposition) into the fuel quantity RC bridge. the denser the fuel, the more current it allows to pass which is used to offset the fuel quantity indication and compensate for volumetric variations due to fuel temperature (and therefore density) giving a reasonably accurate indication of available fuel mass (energy available from fuel is a value according to its mass not its volume). The densitometer is an electronic device, used in digital FQIS systems, which (far more accurately) adjusts the FQIS indication to provide an accurate indication of fuel quantity. ols analogue systems were maybe accurate to 5% and the digital ones with densitometers to 1-2%.