A320 Horizontal stabilizer
Thread Starter
Join Date: Jan 2014
Location: KSA RIYADH
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
A320 Horizontal stabilizer
Gents.
Can some one please provide us with the allowable damage to the skin plate of an A320 HS.
dents with a depth of 2 mm, are they allowed in the leading edge as per SRM ??
What is the corrective action please.?
Thank you.
Can some one please provide us with the allowable damage to the skin plate of an A320 HS.
dents with a depth of 2 mm, are they allowed in the leading edge as per SRM ??
What is the corrective action please.?
Thank you.
Thread Starter
Join Date: Jan 2014
Location: KSA RIYADH
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Thanks vs69 "horizontal stablizer"
As far as i could see in the SRM, 1.5 mm is the maximum depth due to its location in an aerodynamical critical area.
if you or others have any other references, please provide.
if you have a 2 mm depth or more in the Leading Edge of Horizontal Stablizer of an airbus 320 , what is the procedure?
Thank you.
if you or others have any other references, please provide.
if you have a 2 mm depth or more in the Leading Edge of Horizontal Stablizer of an airbus 320 , what is the procedure?
Thank you.