Part 145 D1

[Lowmick]

Hi there,
I am looking after requirements for Part 145 D1 (NDT - Non Destructive Testing). There are lot of things on website (2042/2003) about A, B or C requirements, but cant find any info for D1.
Anybody please have checklist or manual for steps, which is necessary to do for recieve D1 certification?

Thanks for any info
Petr

[Capot]

FWIW, and I guess you may have been there already; in the Consolidated (ie up to date) version of 2042/2003, Part M Appendix IV, from page 56, has some information on D1 NDT.

[Lowmick]

Yes I have this document... But cant find D1 requirements inside... I think there sould be difference between each category.

[Bus429]

If you require NDT (term changing to NDI) for aircraft or components going through your facility, you don't need a D1 rating but you need all the capability etc such as indicated in 145.A.30 (f), the associated AMC and of course the MOE you will write. See Appendix II, paragraph 7 of Part 145. Also note that for work you carry out under this arrangement, you do not need to issue a Form 1 for what is essentially ship-shop-ship.

If you want to sell the service, compliance 145.A & AMC 30 (f) and the necessary procedure to issue a Form 1. In this latter case, you will have to indicate in the MOE how if you visit their facility how you interface with the customer; how you receive necessary approved data from your customer etc.

PM me for more info. I've done a few approvals and MOEs.

[Ghostdancer]

You should also get a copy of EN4179, the current version is 2009.