Electronic Flight Bag installation
Thread Starter
Join Date: Mar 2009
Location: europe
Age: 58
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Electronic Flight Bag installation
Hi there,
Who knows the approximate time needed to install an EFB in a A320 or B737CG cockpit ?
I mean: complete installation.
If some engineer has any experience about it, please, PM me.
Thank you all for your answers.
Marko.
Who knows the approximate time needed to install an EFB in a A320 or B737CG cockpit ?
I mean: complete installation.
If some engineer has any experience about it, please, PM me.
Thank you all for your answers.
Marko.
Registered User **
Join Date: Mar 2009
Location: USA
Age: 49
Posts: 480
Likes: 0
Received 0 Likes
on
0 Posts
need more info
Single or dual install. If dual do you want them to synk. Do you know what equipment you want installed and what functions or interfaces you desire? Might be able to give you a rough estimate with a little more info.
Join Date: Nov 2003
Location: South West
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Are there no hours on the SB / STC?
If yes, add 25% for low end estimate and 50% for high end estimate.
If no, send it back to whoever wrote it and ask for the estimated hours.
If yes, add 25% for low end estimate and 50% for high end estimate.
If no, send it back to whoever wrote it and ask for the estimated hours.
Thread Starter
Join Date: Mar 2009
Location: europe
Age: 58
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
to sonic bam: the docs provided by navaero are not so clear, and they don't include any manpower estimation. Or, at least, following their commercial, it could be done quickly......and we all know what it means, quickly....
to muduckace: dual, synchronized, the simpliest possible (only jeppesen, or something).
The job should be done by experienced engineers, but unexperienced with EFB installation.
to muduckace: dual, synchronized, the simpliest possible (only jeppesen, or something).
The job should be done by experienced engineers, but unexperienced with EFB installation.
Registered User **
Join Date: Mar 2009
Location: USA
Age: 49
Posts: 480
Likes: 0
Received 0 Likes
on
0 Posts
I managed to find a dual nav aero install on another airframe, but no est. hours on the doc. Have you contacted ASG, they hold the stc. I would guess at 80-120 mhrs based on experience and component location. T-Bag displays mounts need some possible considerable sheetmental work to install. 2 connectivity units (just a cutout for s/m install) into that have usb ports for updates.
The connecticity units are wired back to the EFB computers (a rack needs installed). I don't know if the STC found space in the cockpit and what is the acess like to run wires.
Each side has these components stand alone (no sync). There are intigration units out there that sync the 2 units plus offer a few more functions I believe. ST03335AT is your stc number.
The connecticity units are wired back to the EFB computers (a rack needs installed). I don't know if the STC found space in the cockpit and what is the acess like to run wires.
Each side has these components stand alone (no sync). There are intigration units out there that sync the 2 units plus offer a few more functions I believe. ST03335AT is your stc number.
