Notices
Engineers & Technicians In this day and age of increased CRM and safety awareness, a forum for the guys and girls who keep our a/c serviceable.

cessna relay

Old 30th July 2007 | 13:27
  #1 (permalink)  
Thread Starter
 
Joined: May 2002
Posts: 217
Likes: 0
From: UK
cessna relay

Hi

Can any one help with a p# and supplier of the relay for the Avionics master switch (typical 172sp)

cheers
topdog1 is offline  
Reply
Old 30th July 2007 | 16:22
  #2 (permalink)  
 
Joined: Sep 2004
Posts: 125
Likes: 0
From: Leeds
Is this the switch mounted on the panel?

If so W31X2M1G35 from Adams.

Cheers
L
L-Band is offline  
Reply
Old 31st July 2007 | 07:37
  #3 (permalink)  
Community Builder
20 Anniversary
 
Joined: Feb 2006
Aviation Qualifications: LAME
Posts: 36,138
Likes: 5,738
From: Falling off the end of the thread
If you want a computer copy of the cessna manuals for the 172R 172S etc PM me an address and I will put an old one in the post to you., it will be a few years old (2001 ish) but I have the DVD/ CD Cessna sell and it has all the manuals for the aircraft on them.
NutLoose is offline  
Reply
Old 2nd August 2007 | 17:18
  #4 (permalink)  
Thread Starter
 
Joined: May 2002
Posts: 217
Likes: 0
From: UK
cessna relay

Thanks for the posts and offers

I do not actually need the Cessna manual,I am building a kit plane and have the panel switch which is only rated at 3amp.I know the 172sp uses a similar swith to operate a relay,its the p# of the relay that i would like if any one can help.
topdog1 is offline  
Reply
Old 2nd August 2007 | 21:26
  #5 (permalink)  
 
Joined: Sep 2004
Posts: 125
Likes: 0
From: Leeds
Why use a switch and relay as that will add complication and unreliabilty to the system. If you use a circuit breaker switch and put in a emg switch in case the master fails, then you have only a switch in the system.

L
L-Band is offline  
Reply
Old 2nd August 2007 | 21:33
  #6 (permalink)  
Community Builder
20 Anniversary
 
Joined: Feb 2006
Aviation Qualifications: LAME
Posts: 36,138
Likes: 5,738
From: Falling off the end of the thread
Looking on the CD I have installed on this PC for the steam driven cockpit it only shows the avionics master as a single switch which is 2 in one for both busbars connecting through a fuse to it, are you sure you are not after the battery relay? failing that I may have the newer disc at work and will have a look for you on that. I take it the TV version has a relay in it....

Where to buy from would be CSP at Oxford ( ex CSE aviation parts department), or the likes of Denis Robinson.

Incidentally one thing the Aircraft does have that is superb and that are the switches, they are a combo switch come circuit breaker which trips the switch off, so you do not need a separate CB panel... the other thing is the beacon, the base is about 1cm thick and contains an integeral built in flasher..
NutLoose is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.