Wikiposts
Search

Notices
Engineers & Technicians In this day and age of increased CRM and safety awareness, a forum for the guys and girls who keep our a/c serviceable.

Mercury Contamination

Thread Tools
 
Search this Thread
 
Old 7th February 2000 | 23:58
  #1 (permalink)  
Steamhead
Guest
 
Posts: n/a
Unhappy Mercury Contamination

Understanding that mercury contamination of the airframe is a no no, how does one identify the problem and what does it do to the metal.
 
Old 8th February 2000 | 03:51
  #2 (permalink)  
aeroguru
Guest
 
Posts: n/a
Exclamation

Once saw it after a big bag full of African eels split and spewed it's contents into the belly area.Don't know how the eels got the contamination but it just eats al.alloys and embrittles frames and stringers.You have to cut out all the damage ruthleessly,
I hate to think what happened to all the eels in the other bags and who ended up eating them!
 
Old 8th February 2000 | 05:42
  #3 (permalink)  
CCA
Guest
 
Posts: n/a
Unhappy

We used to x-ray the bilge area when there was a suspected spill, it sticks out like dogs balls.
 
Old 8th February 2000 | 12:07
  #4 (permalink)  
Genghis the Engineer
Guest
 
Posts: n/a
Unhappy

Aluminium (and pretty much all of its alloys) is incredibly reactive with air. This actually protects it because aluminium oxide forms on the surface in about a nothingth of a second which is then impervious to pretty much anything and protects the aluminium.

However, aluminium oxide dissolves very quickly in mercury (and just about nothing else). So, the mercury keeps stripping off the protective oxide, immediately after which the oxide re-forms from fresh aluminium - well you get the picture.

So, in a fairly short time, the mercury effectively eats its way through the aluminium. I've not tried it, but I'm told that with a spare bit of alloy sheet and a test tube of mercury a rather educational demo can be done.

G
 
Old 9th February 2000 | 09:27
  #5 (permalink)  
Cunning Artificer
20 Anniversary
 
Joined: Jun 2001
Posts: 3,125
Likes: 7
From: The spiritual home of DeHavilland
Unhappy

A problem that cost us hundreds of manhours and tens of thousands of dollars when nobody checked the contents of "Medical Supplies" before loading. In the end we cut out the frames and re-skinned the aft cargo belly -- twice. You can find the extent of the spillage by using Flowers of Sulphur, mixed into a paste and spread all over the suspected area and beyond. The paste dries on yellow and is harmless but amalgamates with any minute amounts of mercury to form various sulphides of mercury clearly seen as black patches. This makes the full extent of the contamination visible. Then you get out the saws drills and rivetting guns, there's no safe way to clean it up! The mercury gets in everywhere and if you don't re-build, the affected parts are eaten away faster than the "C" Checks come round.

Be careful working in the area, mercury vapour will be in the air and it can be absorbed through the skin. It is a very nasty poison and once in the body Mercury is not excreted, you just build up a lifetime dose. Good Luck!

------------------
Info noted. Plse report further.
Blacksheep is offline  
Old 10th February 2000 | 01:01
  #6 (permalink)  
Steamhead
Guest
 
Posts: n/a
Thumbs up

Thanks everybody for the very informative replies.
I heard on the grapevine that Boeing had
advised scrapping of an aircraft recently
because of this problem also a heavy maintainence organisation in the u.k. has had to do some re-skinning recently.
 
Old 10th February 2000 | 22:30
  #7 (permalink)  
forget
Guest
 
Posts: n/a
Unhappy

In 1967 the RAF had a Britannia make a one way trip to Nebraska. It was hauling support equipment for a bombing competition – Vulcans verus B-52’s. On arrival a piece of test equipment was found to be broken in its carton and a load of mercury had disappeared into wherever. The RAF left the aircraft there.

Incidentally, the Vulcans won.

( My grammar checker is telling me that ‘was found to be broken’ is ‘Passive Voice’. What the hell is that? )
 
Old 11th February 2000 | 15:16
  #8 (permalink)  
Genghis the Engineer
Guest
 
Posts: n/a
Unhappy

Passive: was found to be broken
Active: I broke it
Accusative: You broke it

Now you know why passive voice is always used in engineering reports.
 
Old 11th February 2000 | 17:01
  #9 (permalink)  
forget
Guest
 
Posts: n/a
Smile

Genghis - God you're sharp. Now I know.

The spooky thing is - the bombing competition I referred to was code-named Giant Voice. When I saw this reminder, 'Passive Voice', I thought Bill Gates had maybe gone a step too far!

Sorry Genghis - 'the bombing competition to which I referred.....

[This message has been edited by forget (edited 11 February 2000).]
 
Old 11th February 2000 | 17:48
  #10 (permalink)  
Wino
Guest
 
Posts: n/a
Unhappy

It was evergreen that had the spill recently. They had to write off one of their younger 747s....


Wino
 
Old 12th February 2000 | 20:15
  #11 (permalink)  
Cunning Artificer
20 Anniversary
 
Joined: Jun 2001
Posts: 3,125
Likes: 7
From: The spiritual home of DeHavilland
Cool

Giant Voice! Aaaaahhh.... I remember it well.
Of course, being an irreverent bunch we immediately renamed it "Big Mouth" Something to do with the locals over there

**********************************
Through difficulties to the cinema
Blacksheep is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.