how does autopilot work?
Thread Starter
Joined: Mar 2005
Posts: 3
Likes: 0
From: Canada
how does autopilot work?
i'm doing some research on how a basic 3-axis autopilot works, but i can't seem to find much in the way of information. does anyone have a general idea, or know of a site where i can get some info?
Joined: Mar 2004
Posts: 470
Likes: 0
From: Oxfordshire
Simply, you have 3 sensors - one in each axis - which are "zero'd" when you engage the autopilot. By this I mean that any output from them at this point would be taken as the null condition.
And deviation from that null will produce an output from the sensor, which is then used to drive a flying control surface. This will cause the aircraft to change attitude, and the output from the sensor would return to it's null output state.
This is real simple, and there's many improvements, including rate systems, which means that the rate of chage is detected, so the correction is applied at the same rate as the disturbance.
To get the autopilot to do something more usefull than just 'cruise control' you can force disturbances on it, and the system will react as if the aircraft had changed attitude, not just the gyro platform. The early Hercules uses this system. Quite simply, there are small motors which move the platform, and the sensors react as for a normal aircraft disturbance.
Hope this helps.
ps. try doing a seach for Mk10a or 10b autopilots.
And deviation from that null will produce an output from the sensor, which is then used to drive a flying control surface. This will cause the aircraft to change attitude, and the output from the sensor would return to it's null output state.
This is real simple, and there's many improvements, including rate systems, which means that the rate of chage is detected, so the correction is applied at the same rate as the disturbance.
To get the autopilot to do something more usefull than just 'cruise control' you can force disturbances on it, and the system will react as if the aircraft had changed attitude, not just the gyro platform. The early Hercules uses this system. Quite simply, there are small motors which move the platform, and the sensors react as for a normal aircraft disturbance.
Hope this helps.
ps. try doing a seach for Mk10a or 10b autopilots.
Joined: Dec 2005
Posts: 117
Likes: 0
From: OVER THE RAINBOW
If it is the old SEP6 autopilot system of Smiths, it works by continously changing the boxes and spraying water displacing spray on the contacts 
If you wish I can send you some scans of some training docs. PM me
If you wish I can send you some scans of some training docs. PM me
