UK Aircraft tool suppliers
Thread Starter
Join Date: Apr 2003
Location: UK
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
UK Aircraft tool suppliers
I am looking for Aircraft tools suppliers in the UK. Need:
2x Rivet Gun, Hand squeezer, dimple die's, Squeezer die's, Bucking bar's, Rivet sets, Cleco's, Drills, Contersink, Scotch-Brite cutting and cleaning kit etc..... Have a big list!
Any suggestions on where to go?
It's for a home build so I am not after the "best" rivet gun, but I want to get good quality kit. Looking at Sioux or US Industrial.
Any suggestions welcome.
2x Rivet Gun, Hand squeezer, dimple die's, Squeezer die's, Bucking bar's, Rivet sets, Cleco's, Drills, Contersink, Scotch-Brite cutting and cleaning kit etc..... Have a big list!
Any suggestions on where to go?
It's for a home build so I am not after the "best" rivet gun, but I want to get good quality kit. Looking at Sioux or US Industrial.
Any suggestions welcome.
I buy most such things from Light Aero and have no hesitation in recommending them.
Mind you, if you are building a rivetted alloy homebuilt, you'll probably find buying or hiring a power rivetter a very worthwhile investment.
G
Mind you, if you are building a rivetted alloy homebuilt, you'll probably find buying or hiring a power rivetter a very worthwhile investment.
G
Join Date: May 2003
Location: Manchester
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Try:
http://www.bardolph.co.uk/
Extensive range although can't comment on prices i.e cheap/expensive (company paid...)
http://www.bardolph.co.uk/
Extensive range although can't comment on prices i.e cheap/expensive (company paid...)
Thread Starter
Join Date: Apr 2003
Location: UK
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Found the William Lees site - www.skinspins.co.uk/aerotools.htm they were helpfull and sent a catalogue. But it took over a week to arrive and I became impatient.
Tried the US - looked through an old trader-plane. Found a place who had "tool kits" that they would customise (delete and add items) so did that. Worked out less then half (including shipping!!)what I was quoted in the UK from one source. Will have to pay VAT but still cheaper.....
Thanks for all the suggestions.
Tried the US - looked through an old trader-plane. Found a place who had "tool kits" that they would customise (delete and add items) so did that. Worked out less then half (including shipping!!)what I was quoted in the UK from one source. Will have to pay VAT but still cheaper.....
Thanks for all the suggestions.
Join Date: May 2001
Location: UK
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
For future reference i can recommed these people here: http://www.yardstore.com/ some of my work mates have ordered from here with no problems. You can order online and the prices i think you will agree are very agreable, infact i'm sure that a few British tool companies will find it hard to justify some of their prices by comparison, as shame really when buying and importing from across the pond is cheaper than purchasing from down the road....