PPRuNe Forums - Incorrect HD Size under WIN7

PPRuNe Forums (https://www.pprune.org/)

- Computer/Internet Issues & Troubleshooting (https://www.pprune.org/computer-internet-issues-troubleshooting-46/)

- - Incorrect HD Size under WIN7 (https://www.pprune.org/computer-internet-issues-troubleshooting/407562-incorrect-hd-size-under-win7.html)

Greek God

3rd March 2010 09:18

Incorrect HD Size under WIN7

Hi Again Folks
Before we start its's not the standard whinge about binary vs commercial labelling!!
I just built a new computer running Win7Pro64bit and installed my old Maxtor 8.5gb HD as a spare/backup drive. System has 2 WD 500GB SATA drives as well but the Maxtor is a PATA drive with std IDE connection. On boot bios sees the Maxtor correctly but in windows the drive shows up as 1.96GB ?
I have reformatted and run F Disk to no avail - any suggestions ???
Thanks

spannersatcx

3rd March 2010 09:57

Sounds like a BIOS issue, check your motherboard BIOS is upto date, and/or settings in it.

green granite

3rd March 2010 10:13

Go to: control panel>Administrative tools>computer management>storage>disc management this will show you how it thinks the drive is configured, it may be that it thinks its only got a small partition on it and the rest is un-allocated.

You can resize partitions etc from there as well

Greek God

3rd March 2010 10:36

Thanks Guys
Have checked the Bios and have also checked the Disk management - it shows as a single disk of 1.96 no partitions?

green granite

3rd March 2010 11:10

Hmmmmmm pass, suggest you try posting the question here. Windows 7 Hardware

Greek God

3rd March 2010 11:51

Thanks GG
I'll give it a go
:ok:

Loose rivets

3rd March 2010 19:44

Have you tried disconnecting one of the other dives?

All times are GMT. The time now is 13:43.