PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   Computer/Internet Issues & Troubleshooting (https://www.pprune.org/computer-internet-issues-troubleshooting-46/)
-   -   Apple stuff - Mac, iPad, iphone (https://www.pprune.org/computer-internet-issues-troubleshooting/314763-apple-stuff-mac-ipad-iphone.html)

aviate1138 16th Nov 2010 05:45

Anyone fitted non Apple SSDs into their bit of kit? I have a 2010 27" iMac i7 core and I have an OWC kit to replace the optical drive with an SSD. I am aiming at 256GB Crucial 300 but could be persuaded otherwise. Prices are beginning to drop a little.

Update....

Settled for an OWC 240GB Mercury Extreme Pro SSD. It arrived from the USA in 48 hours via FedEx at shipping cost of Ģ12.00 [with discount]. SSD itself was Ģ337.00

Now all I have to do is unzip my 27" iMac and remove the 5" Optical drive and ........

Anyone know of a good Mac engineer in the Farnham/Basingstoke/Reading triangle?

Found a really helpful place - Irepair - Apple Repairs - Berkshire, Dorset, Hampshire, Surrey, Wiltshire, London, Kent and South in Basingstoke, :)

Senior Pilot 17th Nov 2010 07:32


Originally Posted by flapsforty (Post 6052208)
iMac, OS X, HP deskjet F4190

How do I print selected text instead of the whole page?

Canīt figure it out.

My HP Photosmart C7200 does that when I highlight the text and select the button: "Print Selection".

Wirelessly, duplex, etc etc. Much as I hate HP, it does actually work ;)

redsnail 21st Nov 2010 19:31

I have a new 11' Mac Air.
Snow leopard OS.
1.6G chip
4Gb ram
160 Gb memory.

Only a few weeks old and been working fine.

While it was asleep, I plugged in a USB rechargable battery + the cable LAN dongle and then woke the machine up.

All was fine for 30 seconds or so. I went to switch off the wifi when that top right part of the screen's icons disappeared. ie wifi, time etc.

I thought I'd restart it.

It shut down (after telling cyberduck to shut up) and then it "hung" at the white screen, Apple symbol and the little bars in a circle going around.

Tried shutting it down and leaving it for a bit and restarting it.

I have done the Hardware diagnostics check, all ok.
I have tried the repair diagnostics (looks like a "DOS" (I know!!) screen)
and tried rebooting from there, didn't work. Back to the "hung" start screen.

I don't have the rescue USB with me, I am not at home. Any other thoughts?

ta
:ugh: :{ :mad:

ExXB 21st Nov 2010 20:01

Start in 'safe' mode: Hold down the Shift key when booting. It will do a number of checks while starting up so it takes longer than usual. You should see a progress bar (boring grey on grey) though.

aviate1138 22nd Nov 2010 06:38

redsnail, try

MacFixIt - CNET Reviews

Is usually on top of most mac problems and is bang up to date on new model troubles.

redsnail 23rd Nov 2010 08:54

ExXB, tried that, same result, as in, it didn't go further than the grey screen with the progress bars.

Aviate1138, thanks, will have a look.

So far it's all looking like I will need to have the OS USB stick that came with the computer to sort it out. That's at home. I am a couple of thousand miles away...

Thanks again. :)

aviate1138 23rd Nov 2010 17:46

redsnail - you have zapped the PRAM?

When to reset the PRAM and SMC/PMU | MacFixIt - CNET Reviews


I have now fitted a 240GB OWC Mercury Extreme SSD drive. The iMac boots up in about 12 seconds and a programme that usually takes a good minute or so comes up in around 18 seconds. No whirring sounds and less heat. Took an hour to fit and set up. I am a happy bunny. Will run my Optical Drive externally - when I need it.

redsnail 25th Nov 2010 09:43

Aviate!!!! *MWAH*

That worked!!!!!!!!!!
I had tried that previously but hadn't let it cycle through several "chimes".

YESSSS so pleased!

Ahhh all is now right with the world. :ok:

L337 26th Nov 2010 06:53

Never thought I would post in this division of PPRuNe......

I am a died in the wool PC man of many many years. Very happy to tinker and do my thing in Windows and the PC. Just like a comfortable habit.

I am about to embark on a career change and that change will require me to use the Apple Mac. In the classroom, 25 of them all lined up. So I have no option but come to terms with the beast.

The Apple will be used for photography. Running Photoshop, Dreamweaver etc etc. Looking at the Apple store, apart from recoiling in horror at the cost, I was a little confused. It did seem to me that the Laptops are very overpriced, and as you move up the scale, the value element improves. The Mac Pro is fairly equivalent to a PC of similar spec.

The iMac looks to me like a large laptop mounted on a plinth... However it is very pretty, and will it get the job done? Quickly and efficiently?

If I go for the Mac Pro, do I have to buy a monitor from Mac, or will any monitor do?

.. all that a a billion other questions that I do not even yet know that I need to ask.

AppleMacster 26th Nov 2010 07:10

L337,

The Mac vs PC debate has being going on for decades. The main difference is that Apple produce both hardware and software, whereas Microsoft try to cover all the bases in terms of hardware and have ended up with a (still) DOS-based system which essentially has to be all things to all men; it will always be a compromise as a result. Apple have complete control over the hardware-software combination and can ensure operability in a way that Microsoft continues to find a challenge. Add to this the fact that the software is more intuitive to use, there's no need for antivirus software, and that Apple system updates actually become leaner and faster through its development, and you have a computer which is made as much as possible to have the maximum resources available to the user.

The iMac will more than do the job you describe. iMacs are used all the way from simple word processing to architectural 3D design. The Mac Pro is really more specialist for those who need ultra-fast rendering for their video projects, for example, where uber-performance really matters. However, in 9/10 cases, the iMac will be more than capable. Many web design businesses use iMacs because they are very powerful and look great at the same time. They will be running Photoshop, Dreamweaver, Xpress, Final Cut Studio, Logic.

If you get a Mac Pro, you don't need to use an Apple monitor.

Applemacster.

Saab Dastard 26th Nov 2010 12:20


Microsoft try to cover all the bases in terms of hardware and have ended up with a (still) DOS-based system
This may have been true 10 years ago, but is certainly no longer the case! Not since Win 2K (some might argue since Win 95, but that was still 16-bit at heart). Just because there is a command line available doesn't mean that it is DOS-based.

SD

AppleMacster 26th Nov 2010 14:49

Saab,

Of course, you're right. I'll be more circumspect with my DOS abuse.:O

Kelly Hopper 2nd Dec 2010 10:37

Any advice please?

I have a MacbookPro less than a year old and have been very pleased with it. Last week however it suddenly decided to act like a PC and slow up. Every web page or app I open I have to wait and wait for.
I have run 2 virus detectors through it and nothing found. Also done a big clean up and deleted many unwanteds but it has made no difference.

Any suggestions?

AppleMacster 2nd Dec 2010 10:41

Kelly Hopper,

If you have any antivirus software on your MacBook, I would strongly recommend that you remove it. There is no need for it, and it might itself be causing the problems.

If that doesn't work, try repairing your permissions. Open Disk Utility, select your Hard Drive on the top left and click "Repair Disk Permissions".

Check that all your system is up-to-date using Software Update in the Apple menu, too.

Applemacster

Kelly Hopper 2nd Dec 2010 11:18

Thanks for the advice Applemacster but the virus software was installed AFTER the problem arose in order to check if I had been infected. It was then removed. Disc repair has also been affected with no appreciable improvement.
Plenty of disc space available too so it's not a case of being too full.
All updates have been done.
?????

ishe 5th Dec 2010 15:18

Google in Saudi
 
Hi All

sorry if this has been posted before, I prefer google to any other search engine, however when in arabic countries the search results end up on the right side of the screen, anyone know how to stop this from happening. I have posted in mac stuff because i have one.
regards

L337 5th Dec 2010 15:50

I have a bookmark saved for UK Google "http://www.google.co.uk"

When down route I click on the link, and the local Google page is avoided...

MacBoero 6th Dec 2010 18:25

Kelly Hopper, you need to allow the Mac to do some routine cleanup operations every now and then. For some reason these "CRON" jobs are scheduled to run by default at between 3am and 5am. Some every day, some once and week and others once a month. You can download free utilities to schedule these jobs to run manually when you want to, just in case the jobs haven't had a chance to run for a while. I use MacJanitor.

Or simply leave the machine on over night every now and then.

Another thing that can help sometimes is to run the built in program called "Disk Utility" and run "Repair Disk Permissions". You should really do this before and after installing new software, apparently, but I tend to just run it once a month or so. It can take a while though, so why not set it running on one of the nights you going to leave the machine on to run the cron jobs, it'll be done by morning.

Occasionally it is a good idea to run the "Verify Disk" option in the disk utility. This also takes a while, and if it does find something, you'll need to boot the machine from the Mac OS X install disk in order to enable the "Repair Disk" option.

Telstar 7th Dec 2010 15:43

Migration assistant from hard disk
 
My 13" white Macbook gave up the ghost on me this week, the motherboard was faulty according to the chaps at two computer shops. I am the proud owner of a new Macbook Pro.

The HD is still intact on the old machine and I would like to use the Migration assistant application to bring over all the data as my time machine back up was a very out of date. The old machine powers up, is that enough to connect it to the new machine for a transfer of data? If I need to take the hard disk out what equipment cables do I need? Thanks.

vulcanised 7th Dec 2010 16:52

I would think a cheap hard drive caddy would be the easiest option.

Plug it into the USB port of your new machine and it should recognise it straight away.


All times are GMT. The time now is 13:28.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.