Go Back  PPRuNe Forums > Misc. Forums > Computer/Internet Issues & Troubleshooting
Reload this Page >

Win 2000 ‘paging file’ problem

Wikiposts
Search
Computer/Internet Issues & Troubleshooting Anyone with questions about the terribly complex world of computers or the internet should try here. NOT FOR REPORTING ISSUES WITH PPRuNe FORUMS! Please use the subforum "PPRuNe Problems or Queries."

Win 2000 ‘paging file’ problem

Thread Tools
 
Search this Thread
 
Old 15th Sep 2002, 10:38
  #1 (permalink)  
7x7
Thread Starter
 
Join Date: Apr 2000
Posts: 291
Likes: 0
Received 0 Likes on 0 Posts
Win 2000 ‘paging file’ problem

I’m using Win 2000 Professional. I’ve just copied the main partition of my hard drive to another hard drive using Norton’s ‘Ghost’ and am having problems using the copy. On startup, it comes up with a message that the new drive doesn’t have a paging file or the paging file is too small. I’ve followed the instructions and written in the paging file details (My Computer/Properties/Advanced etc) to no avail. I’ve even tried increasing the paging file to the maximum. Still no joy. Anyone with any ideas?
7x7 is offline  
Old 15th Sep 2002, 14:45
  #2 (permalink)  
 
Join Date: Feb 2000
Location: [edited by PPRuNe Admin]
Posts: 776
Likes: 0
Received 0 Likes on 0 Posts
To resolve this issue:

Click Start, point to Programs, point to Accessories, and then click Windows Explorer.

In the left pane, expand My Computer, and then click the drive that contains the paging file. Typically, this is the system drive unless you specified otherwise during Windows Setup.
NOTE: The paging file (the Pagefile.sys file) is a hidden operating system file.

To view these files:
On the Tools menu, click Folder Options.

Click the View tab.

Click to clear the Hide protected operating system files (Recommended) check box. (Note that you may want to select this check box again when you finish this procedure to help protect the system files.)

Click Yes when you are prompted to verify the change, and then click OK.

On the File menu, click Properties. Click the Security tab to view the current permissions.

Click Add, click System, and then click Add.

Click Administrators, click Add, and then click OK. Note that you must click Administrators, not Administrator.

Click System, and then click to select the Full Control check box.
This automatically selects the other check boxes.

Click Administrators, and then click to select the Full Control check box. This automatically selects the other check boxes.

Click OK.

Click Start, point to Settings, click Control Panel, and then double-click System.

On the Advanced tab, click Performance Options.

In the Virtual Memory section, note the Total paging file size for all drives value, and then click Change.

Click the drive that contains the paging file. The System and Administrator accounts now have Full Control permissions on this drive so that you can make changes.

In the Initial Size and Maximum Size boxes, type the size for the paging file, and then click Set.

Make sure that the Maximum Registry Size value is at least two times the size of the current registry size.

Click OK.

Quit any running programs, and then restart the computer.
What_does_this_button_do? is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.