Removable HD Enclosures
Thread Starter
Joined: Nov 2006
Posts: 1,643
Likes: 44
From: South of the M4
Removable HD Enclosures
Advice please.
I’m looking for a removable HDD enclosure to take a 2.5-ins SSD that I can easily insert and remove, the idea being that I want to have one SSD with Windows 10 on it and have another SSD with Windows 7. These SSDs being inserted as required for the time when I want to use either Win 10 or Win 7 as OS.
The HDD enclosure should able to fit into a spare (empty) CD/DVD front enclosure on the computer with the caddy holding the appropriate 2.5-ins SSD with OS being inserted as necessary. Ideally the enclosure would be ‘hard wired’ to the existing SATA connectors on the motherboard.
TIA
WT
I’m looking for a removable HDD enclosure to take a 2.5-ins SSD that I can easily insert and remove, the idea being that I want to have one SSD with Windows 10 on it and have another SSD with Windows 7. These SSDs being inserted as required for the time when I want to use either Win 10 or Win 7 as OS.
The HDD enclosure should able to fit into a spare (empty) CD/DVD front enclosure on the computer with the caddy holding the appropriate 2.5-ins SSD with OS being inserted as necessary. Ideally the enclosure would be ‘hard wired’ to the existing SATA connectors on the motherboard.
TIA
WT
Joined: Apr 2007
Posts: 389
Likes: 0
From: moraira,spain-Norfolk, UK
Administrator
Joined: Mar 2001
Aviation Qualifications: PPL
Posts: 8,121
Likes: 686
From: Twickenham, home of rugby
Put your SSDs into USB 3 external caddies. get a good PCI-E USB 3 controller card and front 3.5" bay with 2 x USB 3 slots. Configure the BIOS to boot off USB. Install the OS x 2. Job done.
USB 3 is similar speed to SATA 3, so no real speed disadvantage.
Alternatively, dual boot?
SD
USB 3 is similar speed to SATA 3, so no real speed disadvantage.
Alternatively, dual boot?
SD
Hippopotomonstrosesquipidelian title
Joined: Oct 2006
Posts: 1,825
Likes: 1
From: is everything
SD, I seem to remember installing Windows 7 on a USB 3.0 port could be fun, partly because third-party vendors had to write their own USB3.0 drivers for Win 7and a couple of them introduced registry problems. I think FTDI highlighted this issue first. Also, the USB 3.0 driver would install as Base rather than BBE. An easy fix if you're Einstein. Things may have magically improved since then, but I'd probably start with the Win10 install to give me a boot drive from which to fart around with the Win7 drive.
Or run Win7 as a VM...
Anyway, WT might also consider a dual- or quad-drive enclosure with a drive switch, assuming both drives don't need to be accessible at the same time. There are switches that fit in the floppy drive slot.
Or run Win7 as a VM...
Anyway, WT might also consider a dual- or quad-drive enclosure with a drive switch, assuming both drives don't need to be accessible at the same time. There are switches that fit in the floppy drive slot.
Last edited by Bushfiva; 5th January 2017 at 01:21. Reason: Clarifying switch type
Hippopotomonstrosesquipidelian title
Joined: Oct 2006
Posts: 1,825
Likes: 1
From: is everything
That wouldn't work for Warmtoast, I think, since although four SATA connectors are brought out to the backplane, only one common power connector is available.
Thread Starter
Joined: Nov 2006
Posts: 1,643
Likes: 44
From: South of the M4
Thanks for the advice chaps. A bit of Googling and this cheap and cheerful piece of kit will meet my needs - I hope.
https://www.amazon.co.uk/Dshot%C2%AE...keywords=dshot
Thanks
WT
https://www.amazon.co.uk/Dshot%C2%AE...keywords=dshot
Thanks
WT
