Running a LCD monitor in place of a CRT type.
Thread Starter
Running a LCD monitor in place of a CRT type.
Hi guys my daughter has our old pc in her bedroom and it has an old CRT 17" monitor its huge compared to the modern LCD type,
I have a choice of 2 second hand ones a 17" and a 19", the pc is quite slow by today's stds, its running XP P3 900mhz,
My question if I bought an LCD monitor would the old pc cope with it as I don't know if they are resource hungry or not,
Not sure if there is a driver with the LCD one but I presume windows would find it??
Nick.
I have a choice of 2 second hand ones a 17" and a 19", the pc is quite slow by today's stds, its running XP P3 900mhz,
My question if I bought an LCD monitor would the old pc cope with it as I don't know if they are resource hungry or not,
Not sure if there is a driver with the LCD one but I presume windows would find it??
Nick.
Join Date: Jul 2007
Location: Stockport
Age: 72
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
I would expect no problems as long as the monitor has an analogue VGA input (like the old one). I am not sure if some of the newer monitors only have digital inputs.
Thread Starter
Sounds good thanks for your help, I did wonder about the power consumption so its win win,
And I will check out the input also.
Nick.
And I will check out the input also.
Nick.
Last edited by magpienja; 15th May 2010 at 22:06.
You might also have to google for the drivers. Whatever, you'll get a basic VGA setup, so the machine will work - but the resolution may be a bit off, and only 16 colours... that's the worst-case scenario.
Having said all that, I've never had to do anything with the screen - it's normally only the video card that needs TLC, & you're not changing that.
Having said all that, I've never had to do anything with the screen - it's normally only the video card that needs TLC, & you're not changing that.
LCD monitors give of their best if they are running at their native resolution. That is to say that a monitor offering 1024 x 768 resolution (to pick the most common - if dated - option) will present the best resolution if the video output of the computer is running at that same setting.
What can happen - and often does in my recent observation - is that people buy a new wide screen monitor (16 x 9 ratio is common) and then find that their video options on the older computer only handle 4 x 3 ratio. This can produce a variety of effects depending on how they handle the conflict. Squashed and distorted pictures are the most often sighted results. Sometimes re-adjustment of the monitor and or video output options can produce a more acceptable result. However I still see people happily living with oval clocks and other giveaways. Some say that they even like it like that.
LCD monitors have taken over. I haven't seen a new CRT monitor on sale for a very long time now, and there are lots of perfectly good ones being dumped, or put in the back shed to make way for the new technology. I have three in this category.
regards
FoR
What can happen - and often does in my recent observation - is that people buy a new wide screen monitor (16 x 9 ratio is common) and then find that their video options on the older computer only handle 4 x 3 ratio. This can produce a variety of effects depending on how they handle the conflict. Squashed and distorted pictures are the most often sighted results. Sometimes re-adjustment of the monitor and or video output options can produce a more acceptable result. However I still see people happily living with oval clocks and other giveaways. Some say that they even like it like that.
LCD monitors have taken over. I haven't seen a new CRT monitor on sale for a very long time now, and there are lots of perfectly good ones being dumped, or put in the back shed to make way for the new technology. I have three in this category.
regards
FoR
Join Date: Apr 2002
Location: UK
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Were you thinking of daisy-chain powering the LCD monitor through the computer PSU? (power supply unit)
This used to be the way of things in combination with an IEC male/female power cable [like this] but has been phased out for many years. It's possible that the PSU on your aging P3 might permit this kind of configuration. This isn't current practice and places unnecessary load on the computer PSU.
As others have said:
This used to be the way of things in combination with an IEC male/female power cable [like this] but has been phased out for many years. It's possible that the PSU on your aging P3 might permit this kind of configuration. This isn't current practice and places unnecessary load on the computer PSU.
As others have said:
- You will need the appropriate drivers for the monitor (XP may well detect it, but it's possible that it will simply show as "generic"). You will almost certainly be able to download these.
- As long as the LCD has a VGA [analogue] connector rather than, or in addition to a DVI [digital] connector, it should work fine.
Join Date: Apr 2009
Location: `
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Hyph
This isn't current practice and places unnecessary load on the computer PSU.
One thing I would suggest it to make sure the video resolution is set to 60Hz before connecting the LCD. While many will autodetect and change a higher resolution, some don't and it will result in no video since it may be running at a rate the LCD can't handle. Newer LCDs can also handle 72Hz but I have yet to see one run higher than that (not saying they don't exist, just that I haven't seen one yet).