Upgrading to Windows 7 from Vista
Thread Starter
Join Date: Nov 2008
Location: London
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Upgrading to Windows 7 from Vista
Hi Folks, has anyone upgraded from Vista to 7 yet? Should I back up my computer (photos and music) or does Windows 7 retain every thing?
Thanks for the info.
Thanks for the info.
More bang for your buck
Join Date: Nov 2005
Location: land of the clanger
Age: 82
Posts: 3,512
Likes: 0
Received 0 Likes
on
0 Posts
Backing up everything before you start is the only sensible option in case it goes tits up. It should retain everything ................................but.
Also you could use the opportunity to remove all the accumulated crud and do a clean install of W7 then re-install all you programs. Or at the very least run CC cleaner before you start.
Also you could use the opportunity to remove all the accumulated crud and do a clean install of W7 then re-install all you programs. Or at the very least run CC cleaner before you start.
Join Date: Jun 2009
Location: York
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
From what you have said it doesn't sound like you are currently backing up your important stuff.
So what I would suggest is that you go and buy a 1TB hard drive and an external hard drive case. Remove your existing hard drive and replace it with the new 1TB drive. (Don't worry it's a straightforward swap) Then fit your old hard drive into the new external hard drive case. Put Win7 on the new drive (64 bit version if your system can take it) and your old drive now becomes your external back up drive. You can copy your important docs. back onto the new hard drive once your have installed Win7. Once up and running you can then clear the old drive of all the unwanted rubbish, including the old operating system. Cost for this is probably around £70. You could also use the opportunity to fit some extra RAM as the 64bit version of Win7 recognises more that 4gigs of RAM.
So what I would suggest is that you go and buy a 1TB hard drive and an external hard drive case. Remove your existing hard drive and replace it with the new 1TB drive. (Don't worry it's a straightforward swap) Then fit your old hard drive into the new external hard drive case. Put Win7 on the new drive (64 bit version if your system can take it) and your old drive now becomes your external back up drive. You can copy your important docs. back onto the new hard drive once your have installed Win7. Once up and running you can then clear the old drive of all the unwanted rubbish, including the old operating system. Cost for this is probably around £70. You could also use the opportunity to fit some extra RAM as the 64bit version of Win7 recognises more that 4gigs of RAM.
Join Date: Jun 2008
Location: UK
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Having done this upgrade on 3 different PCs/laptops now, I can confirm that the upgrade from Vista to 7 is very simple - as others say, just ensure you've backed any important documents up - usb/cd or external hard drive, your choice.
XP to Vista took a little longer as there were one or two compatability issues that had to be ironed out but the PC is running like a dream now on Windows 7.
In short - I'd thoroughly recommend doing it - far, far better OS than Vista!
XP to Vista took a little longer as there were one or two compatability issues that had to be ironed out but the PC is running like a dream now on Windows 7.
In short - I'd thoroughly recommend doing it - far, far better OS than Vista!
Join Date: Aug 2000
Location: formally Alamo battleground, now the crocodile with palm trees!
Posts: 960
Likes: 0
Received 0 Likes
on
0 Posts
From what I have read I recommend to do a clean install. If you just upgrade from Vista 
W7 will be slower than W7 that had been installed from a freshly formatted hdd.
(Can't find the article right now, I'll post it asap)
7 7 7 7
W7 will be slower than W7 that had been installed from a freshly formatted hdd. (Can't find the article right now, I'll post it asap)
7 7 7 7
Spoon PPRuNerist & Mad Inistrator
I've bought the upgrade version, can I do a clean install with this?
Since you aim to do a clean install, you won't lose anything by trying, as you will have backed up your data elsewhere.
SD
Psychophysiological entity
Can Win XP be upgraded to windows 7?
Basically Mr D, no.
License-wise, I read it as being okay, so is a smooth physical upgrade not possible, or is it just the detritus issue that you refer to?
More bang for your buck
Join Date: Nov 2005
Location: land of the clanger
Age: 82
Posts: 3,512
Likes: 0
Received 0 Likes
on
0 Posts
From Microsoft: http://emea.microsoftstore.com/UK/Mi...3_HPup_default
Running Windows Vista?
If you have Windows Vista, you can purchase Windows 7 Upgrade versions. You can do a clean install (back up your files, clean install, and reinstall your applications) or an in-place upgrade (Windows 7 installs over Windows Vista).
Running earlier versions?
If you have Windows XP, you can purchase Windows 7 Upgrade versions. But you must back up your files, clean install, and reinstall your applications.
If you’re running Windows 2000, you’ll need to purchase the full product and do a clean install.
If you have Windows Vista, you can purchase Windows 7 Upgrade versions. You can do a clean install (back up your files, clean install, and reinstall your applications) or an in-place upgrade (Windows 7 installs over Windows Vista).
Running earlier versions?
If you have Windows XP, you can purchase Windows 7 Upgrade versions. But you must back up your files, clean install, and reinstall your applications.
If you’re running Windows 2000, you’ll need to purchase the full product and do a clean install.
There was a thread on this very subject not long ago....
I did a Vista to W7 upgrade, backed up all my important stuff first to an external HDD.
Upgrade went very smoothly indeed over about an hour and a half and nothing was lost, including settings, favourites etc.
EDIT:
And here's the link to the previous thread http://www.pprune.org/computer-inter...s-7-vista.html
I did a Vista to W7 upgrade, backed up all my important stuff first to an external HDD.
Upgrade went very smoothly indeed over about an hour and a half and nothing was lost, including settings, favourites etc.
EDIT:
And here's the link to the previous thread http://www.pprune.org/computer-inter...s-7-vista.html
Official PPRuNe Chaplain
Join Date: Apr 2001
Location: Witnesham, Suffolk
Age: 80
Posts: 3,498
Likes: 0
Received 0 Likes
on
0 Posts
WIN 7 UPGRADE VERSION - BIG WARNING TIME... TWICE OVER:
ONE: If you have XP on your machine, and buy the "upgrade" to Win 7, make very sure to copy off all your documents, valuable stuff, etc before you start. You cannot "upgrade" straight from one to the other - it will delete lots of stuff. Your documents may or may not survive if they are on drive C.
TWO: You have to leave the Win XP on the machine, or the Win 7 will refuse to validate. It expects to be installed over an earlier version of Windows, even though it will delete that. The previous process of "insert qualifying media" doesn't apply. It gets very complicated if you wipe the XP and start from a clean machine.
Don't ask how I know...
ONE: If you have XP on your machine, and buy the "upgrade" to Win 7, make very sure to copy off all your documents, valuable stuff, etc before you start. You cannot "upgrade" straight from one to the other - it will delete lots of stuff. Your documents may or may not survive if they are on drive C.
TWO: You have to leave the Win XP on the machine, or the Win 7 will refuse to validate. It expects to be installed over an earlier version of Windows, even though it will delete that. The previous process of "insert qualifying media" doesn't apply. It gets very complicated if you wipe the XP and start from a clean machine.
Don't ask how I know...
Psychophysiological entity
Oh, fooey!
I don't want to do that now, but I thought I might later on - on the den machine. The problem is that I have one of the W7 RCs on it, so restoring with the disc I had to make would be the requirement it seems.
That sucks! It's not only full of HP detritus (I love that word) it also insists on scrapping my partitions and putting that dumb restore partition back.
At least I won't have to download all the SPs. I hope!
Why not put W7 on, then partition I hear you ask. Cos of the afore mentioned thing about not being able to get C partition down to the required size. ("Partition Specific thread.")
Whatever happened to good old F-disk and DOS?
I don't want to do that now, but I thought I might later on - on the den machine. The problem is that I have one of the W7 RCs on it, so restoring with the disc I had to make would be the requirement it seems.
That sucks! It's not only full of HP detritus (I love that word) it also insists on scrapping my partitions and putting that dumb restore partition back.
At least I won't have to download all the SPs. I hope!
Why not put W7 on, then partition I hear you ask. Cos of the afore mentioned thing about not being able to get C partition down to the required size. ("Partition Specific thread.")
Whatever happened to good old F-disk and DOS?
Psychophysiological entity
Specifically Upgraded?
That's intriguing, since it states a clean install after RC. One hardly likes to ask.
That's intriguing, since it states a clean install after RC. One hardly likes to ask.
Hippopotomonstrosesquipidelian title
Join Date: Oct 2006
Location: is everything
Posts: 1,826
Likes: 0
Received 0 Likes
on
0 Posts
I guess Microsoft's main concern is that the RC is Windows Ultimate, and they didn't want people upgrading from Ultimate to a non-Ultimate version for various reasons.
Google will help you find a step-by-step guide on upgrading from the RC, but basically, copy the installation DVD to HD, go down the "sources" folder until you find cversion.ini, and change "MinClient=7233.0" to "MinClient=7000.0". There are more complex ways of upgrading to a non-Ultimate product.
Google will help you find a step-by-step guide on upgrading from the RC, but basically, copy the installation DVD to HD, go down the "sources" folder until you find cversion.ini, and change "MinClient=7233.0" to "MinClient=7000.0". There are more complex ways of upgrading to a non-Ultimate product.
Official PPRuNe Chaplain
Join Date: Apr 2001
Location: Witnesham, Suffolk
Age: 80
Posts: 3,498
Likes: 0
Received 0 Likes
on
0 Posts
Dottore Rivets,
You seem to have backed yourself into a corner with that machine.
My inclination would be to acquire and fit a second hard drive (they are not expensive), then copy all your "stuff" over to it - documents, downloaded software installers, that sort of thing. Then make sure that you have install CDs for the software you want to keep.
Remove the new hard drive (for safety). Wipe the existing detritus-filled one and run FDISK to set up the partitions the way you want them to be. Then install your new Win 7 (full version) on it. Then plug your new hard drive back in, install your software from it or the install CDs, and copy stuff to the partitions you want.
You can't upgrade from Win 7 RC to Win 7 final using an "upgrade" disk - or I don't think you can. I've not tried.
PS: Biushfiva's trick certainly worked for installing later versions along the Beta - RC route. I'm not sure what it will do if you try to install Release Home Premium over RC Ultimate - I could imagine some "interesting" results.
You seem to have backed yourself into a corner with that machine.
My inclination would be to acquire and fit a second hard drive (they are not expensive), then copy all your "stuff" over to it - documents, downloaded software installers, that sort of thing. Then make sure that you have install CDs for the software you want to keep.
Remove the new hard drive (for safety). Wipe the existing detritus-filled one and run FDISK to set up the partitions the way you want them to be. Then install your new Win 7 (full version) on it. Then plug your new hard drive back in, install your software from it or the install CDs, and copy stuff to the partitions you want.
You can't upgrade from Win 7 RC to Win 7 final using an "upgrade" disk - or I don't think you can. I've not tried.
PS: Biushfiva's trick certainly worked for installing later versions along the Beta - RC route. I'm not sure what it will do if you try to install Release Home Premium over RC Ultimate - I could imagine some "interesting" results.
Hippopotomonstrosesquipidelian title
Join Date: Oct 2006
Location: is everything
Posts: 1,826
Likes: 0
Received 0 Likes
on
0 Posts
Upgrade the Windows 7 RC to any retail version Icrontic Tech shows how to upgrade to any version, but I've not tried it.