Misbehaving mouse pointer W7
Thread Starter
Join Date: Aug 2005
Location: ELLX
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Misbehaving mouse pointer W7
Once again I call upon the great PPRuNe hive mind for assistance with a little niggle...
I recently installed W7 (free upgrade from manufacturer as I purchased laptop at the end of August)- It came on a series of discs and everything works as advertised except...
As I move the mouse pointer with the touch pad, it buts up against the top, bottom and right of the screen as it should. A flick in the opposite direction instantly restores it. However, if I scroll towards the left, the cursor will vanish. If I continue scrolling (10 times, say) I will then need to scroll the same number of times to the right to get the damn thing back on the screen- This had baffled me until I figured out what was going on, but I am now baffled by the cause
I did have Pinnacle Studio 10 installed pre-upgrade, but this needs to be reinstalled after the W7 upgrade- This offers dual screen capability, could the problem be there?
I tried fiddling with the mouse pointer settings in the CP but had no joy... I also had an alert as to which screen (I only have one!) I wanted to use, but I have not been able to call this screen up again.
Any suggestions gratefully received!
Maxbert
I recently installed W7 (free upgrade from manufacturer as I purchased laptop at the end of August)- It came on a series of discs and everything works as advertised except...
As I move the mouse pointer with the touch pad, it buts up against the top, bottom and right of the screen as it should. A flick in the opposite direction instantly restores it. However, if I scroll towards the left, the cursor will vanish. If I continue scrolling (10 times, say) I will then need to scroll the same number of times to the right to get the damn thing back on the screen- This had baffled me until I figured out what was going on, but I am now baffled by the cause
I did have Pinnacle Studio 10 installed pre-upgrade, but this needs to be reinstalled after the W7 upgrade- This offers dual screen capability, could the problem be there?
I tried fiddling with the mouse pointer settings in the CP but had no joy... I also had an alert as to which screen (I only have one!) I wanted to use, but I have not been able to call this screen up again.
Any suggestions gratefully received!
Maxbert
Official PPRuNe Chaplain
Join Date: Apr 2001
Location: Witnesham, Suffolk
Age: 80
Posts: 3,498
Likes: 0
Received 0 Likes
on
0 Posts
It does sound as if your PC thinks you have two screens, and the mouse is wandering off onto the other one.
Try right-clicking on the desktop, then on "Screen Resolution" to see if there's anything there that says anything useful.
Try right-clicking on the desktop, then on "Screen Resolution" to see if there's anything there that says anything useful.
Join Date: Aug 2009
Location: England
Age: 35
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Specifically;
- Control panel
- Display
- 'Settings' tab
- See whether there is a box which says 'extend my windows desktop onto this moniter'
- Uncheck that box if it is checked.
Does that help?
- Control panel
- Display
- 'Settings' tab
- See whether there is a box which says 'extend my windows desktop onto this moniter'
- Uncheck that box if it is checked.
Does that help?